Implant Instruments

The success of the implant treatment depends on the precise tightening of the parts placed directly on the implant. A pre-stressed tightening of the screw will help avoid any risk of screw loosening. Also, high tightening torques may lead to screw fracture. A calibrated tightening can only be guaranteed through the use of a precision instrument offering a torque control system. The dynamometric manual wrench has been specially designed to meet those requirements.

• Precision instrument equipped with a torque adjustment system for screwing prosthetic components.
• 7 torque levels (5 to 35 N.cm) and universal connection of the prosthetic mandrels
• Micro head and ergonomic handle
• Reduced amplitude of movement compared with tightening using a ratchet wrench
• Only 160g for a better freedom of movement
• Universal torque wrench, recommended with most type of implants
• 135°C Autoclavable

• One-Touch Forward/Reverse Switch: Seamlessly toggle directions with a single press, ensuring effortless control and smoother clinical workflows.
• Comprehensive Implant & Repair Solutions: Perfect for first-phase implants, second-phase restorations, and versatile backup clinical tasks.
  
• Precision Torque & Auto-Stop Control: Equipped with a smart calibration system—alerts with a buzzer and stops automatically upon reaching preset torque.
  
• Applications: Implant Installation & Removal, Abutment Placement, Healing Nut Adjustment.
• Sterilizable contra angle (Electronic handle can not be autoclaved)
  

• Main Unit Care:
  If the tool will not be used for an extended period, recharge the battery every 15 days.
  Unplug the wrench motor main unit within 2 hours after it is fully charged. Failure to do so may damage the battery.
  After use, wipe the main-body housing with a soft cloth dampened with alcohol. Store it in a dry, well-ventilated area once the surface is completely dry.
  Important Note: Do NOT use highly concentrated ethanol or corrosive liquids to clean the main unit.
  
• Maintenance of the bender:  
  Apply oil to the shaft center through the screw-start insertion port daily to extend shaft service life.
  Spray lubricant at the end of every workday for at least 1-2 seconds per application.
  For heavy-duty-workloads: Spray lubricant once at noon and again at the end of each workday.
  Spray lubricant before autoclaving.
  

• Wireless Precise torque
• Low speed and high torque
• Speed Range: 10-50rpm
• Torque Range:10-50N.cm
• Sterilizable contra angle
• Electronic handle can not be autoclaved
• Package: 1 pc Wrench and 16 pcs drivers

• Drivers 0.9 (Long+Short)
• Drivers 1.0(Long+Short)
• Drivers 1.2(Long+Short)
• Drivers 1.25(Long+Short)
• Drivers 1.27(Long+Short)
• Drivers 1.4(Long+Short)
• Drivers UNGRIP/NOB (Long+Short)
• Drivers SCS/ITI (Long+Short)

• It can be used for the installation and removal of the dental implants, implant abutments, implant healing nuts etc.

• Real-time speed and torque reading, clear and intuitive
  
• Multi-level adjustable torque, ideal for various dental implant procedures
• Autoclavable protective case & Contra Angle, compliant with dental sterilization standards
• 1900mAh battery, supports multiple surgeries per full charge
• Lightweight body, reduces hand fatigue during long operations
• Compatible with most dental implant screws and abutments
  

• Lithium battery
• Wireless Precise torque
• Low speed and high torque
• Speed Range: 10-50rpm
• Torque Range:10-50N.cm
• Sterilizable contra angle (Electronic handle can not be autoclaved)
• Package: 1 pc Wrench and 16 pcs drivers

• Torque Wrench:10-50N.cm
• Drivers 0.9 (Long+Short)
• Drivers 1.0(Long+Short)
• Drivers 1.2(Long+Short)
• Drivers 1.25(Long+Short)
• Drivers 1.27(Long+Short)
• Drivers 1.4(Long+Short)
• Drivers fit for ITI (Long+Short) 
• Drivers fit for  NOB (Long+Short)

• The success of the implant treatment depends on the precise tightening of the parts placed directly on the implant.
• A pre-stressed tightening of the screw will help avoid any risk of screw loosening. Also, high tightening torques may lead to screw fracture.
• A calibrated tightening can only be guaranteed through the use of a precision instrument offering a torque control system.
• The device must be only used by or under instruction of  qualified medical personnel. The personnel who use the device must be trained.

• Wireless Precise torque
• Low speed and high torque
• Speed Range: 10-50rpm
• Torque Range:10-50N.cm
• Sterilizable contra angle (Electronic handle can not be autoclaved)
• Package: 1 pc Wrench and 16 pcs drivers

• Torque Wrench:10-50N.cm
• Drivers 0.9 (Long+Short)
• Drivers 1.0(Long+Short)
• Drivers 1.2(Long+Short)
• Drivers 1.25(Long+Short)
• Drivers 1.27(Long+Short)
• Drivers 1.4(Long+Short)
• Drivers fit for ITI (Long+Short) 
• Drivers fit for NOB (Long+Short)

• The success of the implant treatment depends on the precise tightening of the parts placed directly on the implant.
• A pre-stressed tightening of the screw will help avoid any risk of screw loosening. Also, high tightening torques may lead to screw fracture.
• A calibrated tightening can only be guaranteed through the use of a precision instrument offering a torque control system.
• The device must be only used by or under instruction of  qualified medical personnel. The personnel who use the device must be trained.

• Drivers 0.9 (Long+Short) fit for Xive
• Drivers 1.0(Long+Short) fit for Ankylos
• Drivers 1.2(Long+Short) fit for Osstem, 3I, Megagen
• Drivers 1.25(Long+Short) fit for Cortex, Ticare, ABT, Zimmer
• Drivers 1.27(Long+Short) fit for Dentium, Dentis, Adin, EBGO, Astra, MIS
• Drivers 1.4(Long+Short) fit for ICX
• Drivers fit for NOB(Long+Short) fit for Nobel
• Drivers R165 (Long+Short) fit for Straumann

• Material: Stainless Steel
  
• Used for oral implant treatment, to remove broken implant screws.
  
• Remove the fractured screw fast and safely
  
• Applicable to various implant system
  
• 134°C Autoclavable
  
• Package: 1 box

• Material: Stainless steel
  
• Torque wrench: 15-60N.cm
• 135°C autoclavable, the box can also be sterilized
• Driver 1.0
• Drivers 1.2
• Drivers 1.25
• Drivers 1.27
• Drivers 1.4
• Driver 2.4
• Driver 3.2
• Driver 3.3
• Driver fit for NOB
• Driver fit for ITI
• Driver fit for ANT
• Driver Octa3.0
• Driver Triangle

• Driver Square

• 135°C Autoclavable,the box can also be sterilized
• Torque Wrench: 10-70N.cm
• Drivers 0.9 (Long+Short)
• Drivers 1.0 (Long+Short)
• Drivers 1.2 (Long+Short)
• Drivers 1.25 (Long+Short)
• Drivers 1.27 (Long+Short)
• Drivers 1.4 (Long+Short)
• Drivers fit for NOB (Long+Short)
• Drivers fit for ITI (Long+Short)
• Material: Material

• 134°C Autoclavable, the box can also be sterilized.
  Electronic handles can only be alcohol wiped on the surface and cannot be autoclaved.
• Torque precision setting, adjustable torque, torque range up to 10-50N.CM.
• Safety warning and alarm prompt. When the preset torque is reached, the buzzer sounds to alert.

• Torque Wrench: 10-50N.cm
• Drivers 1.0 (Long+Short)
• Drivers 1.19(Long+Short)
• Drivers 1.2(Long+Short)
• Drivers 1.25(Long+Short)
• Drivers 1.27(Long+Short)
• Drivers 1.4(Long+Short)
• Drivers T-5(Long+Short)
• Drivers T-6 (Long+Short)

• Torque Wrench:15-70Ncm
• Short drivers: 20mm
• Long drivers: 25mm
• Drivers 1.0(Long+Short)
• Drivers 1.19(Long+Short)
• Drivers 1.2(Long+Short)
• Drivers 1.25(Long+Short)
• Drivers 1.27(Long+Short)
• Drivers 1.4(Long+Short)
• Drivers T5(Long+Short)
• Drivers T6 (Long+Short)

• Guided Implant Surgery Kit, Made of Medical Grade
• Drill Guide & Guide Spacer Diameters: 6.0mm, 7.5mm, 9.0mm, 10.5mm, 12.0mm.
• Top Quality
• Material：Metal
• Package:
  5 pcs  Drill
  5 pcs  Spacer
  1 pc  Holder

• Guided Implant Surgery Kit, Made of A Grade Stainless Steel
• Package:
  4 pcs Sinus Hand Instruments
  6 pcs Drills
  4 pcs Drill Stoppers
  
• *Please note that the packaging box for this product will be shipped randomly.

• Driver 1.0 fit ANKYLOS
• Driver 1.2 fit 3I,OSSTEM,MEGAGEN ,UFIT,NEOBIOTECH,DAT
• Driver 1.27 fit DENTIUM,BEGO,ZIMMER,ASTRA,KJ,COR,ADIN,AB
• Driver 1.4 fit ICX
• Driver R155 fit NOBEL
• Driver R165 fit ITI

• It is mainly used for the positioning and measurement of implants in the process of implant operation.
• Material: Stainless Steel
• 135℃ Autoclavable
• Package: 1 set +1 replace ruler

• Measuring range: 0-80mm.
• It can be used to measure the interdental distance during implantation and orthodontics.
• High precision stainless steel material, can be high temperature and high pressure elimination.
• With double scale, suitable for left and right hand operation.
• Packing: 1pcs/pack

• Models: Short: 34.3mm, Long: 44.5mm
• Manufactured from High Quality Medical Grade Stainless Steel, Fully Autoclavable Stainless Steel, Optimum Performance and Longevity.
• High Quality Guaranteed.
• Manual Extractor.
• Extract apical root fragments easily and safely.
• Root Fragment Manual Extractors are a simple, inexpensive solution to a complex problem.
• With these extractors, the alveolus is left undamaged compared to the use of traditional root elevators and forceps.
• Tapered self-tapping threads ensure a firm grip of the root fragment.
• Safety eyelets allow for floss tie-off if desired. 

• Parallel implant assistive device is a simple device that can ensure parallel implantation without affecting the surgical process.
• The parallel planting assistant includes a guide arm and a drilling arm. The two arms are connected, allowing the guide arm and drilling arm to move parallel and freely. The design of the drilling arm is suitable for 2.0mm drill bit.

• Parallel planting arrangement
• Simple operation to achieve good prosthetic effect
• Can be directly sterilized
• Suitable for any implant system
• Reduce surgical time

• Material: high quality stainless steel
• Head Type: Wide/Pointed/Gradient Head
• Sterilization: autoclave
• Dental Double Ends Dental Implant Periosteal Elevator Tool For Retracting Separator Dental Surgical Supplies Instruments.
  
• Double Ends Design: Efficiently separates and retracts with dual-purpose heads, enhancing surgical precision.
  
• Stainless Steel Material: Crafted from durable stainless steel for long-lasting use in dental procedures.
  
• Versatile Surgical Instrument: Ideal for dental implant placement and periosteal elevation, a versatile tool for oral surgeons.
  

• This comprehensive 6pcs set provides a versatile array of sizes for precise bone grafting procedures.
• The tool has been coated to reduce wear during use.
• Optimized for dental bone grafting, these instruments facilitate the placement of bone graft material.

• 6pcs/Set

• Material：Stainless Steel
• Applicable to various implant system
• Helps to remove broken screws without damaging the implant
• Remove the fractured screw fast and safely
• 134°C Autoclavable