Adhesives Cements & Primers

• This product is one kind of orthodontic direct bonding system resin with aromatic bis dimethyl acrylate resin as its main material.
• As a new-type orthodontic direct bonding system, it is convenient to use with little waste, easy to handle independently and has a favorable clinical bonding strength.
• It consists of primer and paste with acid etchant, spatulas and small brusher as its accessories.
  
• Notice: The cure time must be controlled well. It should cure in air naturally within 15 seconds. If more than 15seconds, adhesive can't stick anymore. 

Preparation: Clean tooth enamel surface,eliminate tooth contamination,rinse then isolate tooth and blow-dry.

Etching: Etching the enamel of the tooth with acid etchant for 50 or 60 sec. Rinse and dry with clean air. If the enamel does not have a chalky appearance, pls. repeat the process;

Brushing: apply a thin layer of the primer over the etched enamel with the brusher;

Packaging Detail:

• 1 x bottle（3ml）Primer
• 1 x Syringes (3.5g each)Paste
• 1x Syringes (2.5ml) etchant Gel
• 7x Brushes
• 1xSyringe tip 

Storage:

Store at 25℃ or less in a cool and dry place and avoid direct sun exposure. Recap the syringe after use.

Warning:

• Ortho-Bonding primer and adhesive contains acrylate monomers.
• Acrylate monomers are known to produce allergic skin reactions in certain sensitive individuals. May cause eye and skin irritation.

Precautions:

• A void eye and skin contact. Wear gloves when handing this material.
• Please follow manufacturer's directions on the handing, proper use and recommendations for eye protection, when using a curing light

Features:

• This dental light cure adhesive bonding system is designed to be used at room temperature (20-25°C, 68-77°F).
• Storage between 2-27°C/35-80°F Light Sensitive

Warning:

• Primer and adhesive contains acrylate monomers.
• Acrylate monomers are known to produce allergic skin reactions in certain sensitive individuals. May cause eye and skin irritation.

Precautions:

• A void eye and skin contact. Wear gloves when handing this material.
• Please follow manufacturer's directions on the handing, proper use and recommendations for eye protection, when using a curing light

Features:

• This dental light cure adhesive bonding system is designed to be used at room temperature (20-25°C, 68-77°F).
• Storage between 2-27°C/35-80°F Light Sensitive