Bonding

• Its self-limiting etch formula creates an ideal etch pattern with an average depth of 1.9 µm from a 15-second etch, allowing for maximum adhesive penetration for increased bond strength.
• Precise placement and won’t run.
• Cleanly rinses without residue.
• Superior viscosity with self-leveling to allow maximal penetration.
• Penetrates fissures and vertical surfaces.
• Deep blue colour for optimal visibility.
• Ideally used for etching enamel, dentin and procelain before adhesive restorations.

• 5th generation adhesive for all classes of direct restoration
• Post and core bonding 
• Ceramic veneer/crown/inlay and other indirect restoration bondings
• 5ml/Bottle

• High bonding strength and long lasting durability
  
• Easy infiltrate to dentin tubules.Reduce the risk of post-operative sensitivity
• Compatible with all light cure restoratives
• Time saving and easy to use

• Enamel bonding : 30 seconds etch on enamel then apply 5th generation adhesive
  
• Dentin bonding: 15 seconds etch on dentin then apply 5th generation adhesive

• Etching gel is a polymer thickened gel for use on enamel and dentin.
• This gel will effectively treat enamel and dentin, producing the necessary microretentive surface for successful bonding. 
  
• The polymer thickener creates thixotropic properties, enhancing handling characteristics.
  
• The etchant rinse away cleanly and quickly, leaving no residue.

• Indications: Treat dentin and enamel, Treating agent on dental restorative material. Isolate tooth and then prepare the cavity in a conservative manner. clean the entire surface with a slurry of pumice and water. Apply etchant using a tip, a disposable syringe tip, or disposable brush tip. Allow etchant to remain in palce for 15 seconds. etching time should be monitored with a stopwatch. begin timing at the end of application.  
  
• Option: Place etchant enamel first, then proceed to cover dentin, for a slightly longer enamel etching time. Rinse thoroughly (at least 5 seconds) to completely remover all traces of etchant. Remove exces moisture from the tooth and proceed with the application of etching gel, waiting for 10 seconds, then rise thoroughly. then apply adhesive.
  

• Scope of application: Used for bonding dentine and enamel with resin and ceramic materials.
  
• Clinical operation steps: Pretreatment of caries and pulp protection. Use 37% phosphoric acid etchant for treatment, then clean it thoroughly with water, and dry it thoroughly with an oil-free air gun. Apply a layer of adhesive evenly on the tooth surface with a small brush. Make the adhesive layer even as far as possible with the wind power of the air gun. Irradiate with an oral light curing light source of 300mW/c㎡ for 20 seconds to cure the adhesive. Please use the composite resin filling material according to the original manufacturer's instructions, as well as the subsequent grinding and reconstruction processes.
  
• Precautions: During clinical use, the lip and adjacent teeth should be well isolated and protected. Avoid contact with eyes, mucous membranes and skin. Phenols, clove oil and zinc oxide can not be used as the bottom material of the first layer,because clove oil contains polymerization inhibitor "phenolic substances", which will directly affect the degree of polymerization of the adhesive. During the curing operation, the distance between the surface of the light curing lamp and the adhesive should be kept below 2mm, but it should not be in contact with the material. Before applying adhesives and composite resin fillings, the tooth treatment surface should avoid contamination by water and other impurities.  It is not suitable for pulp capping, and patients who are allergic to resin should not use it.
  
• Environment: This product is operated at room temperature.
  
• Storage Conditions: This product should be stored in a cool and dry place at 2°C~28°C, avoiding direct sunlight.
  
• Shelf Life: This product is valid for 2 years, please do not use expired product.
  
• Contraindications: Patients with a history of allergy to methacrylate resins are contraindicated.

• Indication for use: It is suitable for bonding of enamel and dentin. Ceramic veneer/crown/inlay and other indirect restoration bondings.
• Advantages: High bonding strength and long lasting durability. Easy infiltrate to dentin tubules. Reduce the risk of post-operative sensitivity. Compatible with all light cure restoratives. Time saving and easy to use. 

• Best-In-Class Adhesion: Nano-hybrid glass filler technology provides incredible bond strength and reliable adhesion to a comprehensive array of dental materials, encompassing dentin, enamel, as well as various dental metals such as zirconia and PFM.
• Full Compatibility: Can be used with light-cured, self-cured, and dual-cured composite materials on direct and indirect restorations.
• Efficiency: Flip-top cap design saves valuable time and provides “one-drop” flow of adhesive while innovative unit dose system reduces exposure to air and moisture, preserving the bond agent’s effectiveness and reducing the need for measurement.
• Complete Solution: Combine Rodin® Bond and SensiGuard™  for a comprehensive bonding solution that not only enhances bonding but safeguards against postoperative sensitivity through dentin tubule sealing.

• 1 x 5ml Rodin Bond Adhesive Bottle

• 9.5% Porcelain Etch is an Etchant to make porcelain surface treatment. 
• It can roughen the surface of porcelain and enhance the bonding strength.  
• It is used on ceramic based crown,veneer,inlay and onlay. 

SensiGuard™, is a groundbreaking antibacterial desensitizer that seals dentin tubules to prevent postoperative sensitivity and significantly reduces the risk of caries formation beneath restorations. In addition to these desensitizing qualities, SensiGuard™ significantly enhances bond strength through the rewetting of collagen fibers in the dentin. When combined with a dental adhesive such as Rodin® Bond, SensiGuard™ acts as both a desensitizer and a primer. This unique formulation revitalizes collapsed collagen fibers, providing unparalleled monomer penetration, creating exceptional shear bond strength and steadfast adhesion to dentin tubules.

• Patient Comfort: Significant reduction of post-operation sensitivity in patients.
• Visibility: Distinct yellow tint provides unparalleled visibility during procedures, ensuring precise and controlled application.
• Precision: Optimal consistency guarantees accurate placement, giving you the confidence to deliver exceptional results every time.
• Anti-Bacterial: Potent antibacterial qualities reduce the chance of caries formation beneath restorations, delivering long-lasting protection for your patients.
• Universal Compatibility: Seamless Integration with a wide range of dental adhesives and workflows.
• Efficiency: Save time without sacrificing precision. The flip-top cap design guarantees efficient application while providing a controlled single drop per procedure.

• 1 x 5ml SensiGuard Desensitizer Bottle

• Instant activation
• No refrigeration required
• Gingival protection guarantees patient comfort
• Desensitizing additives minimize sensitivity during and after procedures
• Item Code:
  IB-801, iBrite® chairside tooth whitening kit, gel-type, 3ml, 1-patient
  IB-803, iBrite® chairside tooth whitening kit, gel-type, 5-patient kit
  

Rodin Bond

● Best-In-Class Adhesion: Nano-hybrid glass filler technology provides incredible bond strength and reliable adhesion to a comprehensive array of dental materials, encompassing dentin, enamel, as well as various dental metals such as zirconia and PFM
● Full Compatibility: Can be used with light-cured, self-cured, and dual-cured composite materials on direct and indirect restorations
● Efficiency: Flip-top cap design saves valuable time and provides “one-drop” flow of adhesive while innovative unit dose system reduces exposure to air and moisture, preserving the bond agent’s effectiveness and reducing the need for measurement
● Complete Solution: Combine Rodin® Bond and SensiGuard™  for a comprehensive bonding solution that not only enhances bonding but safeguards against postoperative sensitivity through dentin tubule sealing.

SensiGuard™

● Patient Comfort: Significant reduction of post-operation sensitivity in patients
● Visibility: Distinct yellow tint provides unparalleled visibility during procedures, ensuring precise and controlled application
● Precision: Optimal consistency guarantees accurate placement, giving you the confidence to deliver exceptional results every time
● Anti-Bacterial: Potent antibacterial qualities reduce the chance of caries formation beneath restorations, delivering long-lasting protection for your patients
● Universal Compatibility: Seamless Integration with a wide range of dental adhesives and workflows 
● Efficiency: Save time without sacrificing precision. The flip-top cap design guarantees efficient application while providing a controlled single drop per procedure

• 50 x Rodin Bond 0.1 mL Unit Dose
• 50 x SensiGuard 0.1 mL Unit Dose

SensiGuard™, is a groundbreaking antibacterial desensitizer that seals dentin tubules to prevent postoperative sensitivity and significantly reduces the risk of caries formation beneath restorations. In addition to these desensitizing qualities, SensiGuard™ significantly enhances bond strength through the rewetting of collagen fibers in the dentin. When combined with a dental adhesive such as Rodin® Bond, SensiGuard™ acts as both a desensitizer and a primer. This unique formulation revitalizes collapsed collagen fibers, providing unparalleled monomer penetration, creating exceptional shear bond strength and steadfast adhesion to dentin tubules.

• Patient Comfort: Significant reduction of post-operation sensitivity in patients.
• Visibility: Distinct yellow tint provides unparalleled visibility during procedures, ensuring precise and controlled application.
• Precision: Optimal consistency guarantees accurate placement, giving you the confidence to deliver exceptional results every time.
• Anti-Bacterial: Potent antibacterial qualities reduce the chance of caries formation beneath restorations, delivering long-lasting protection for your patients.
• Universal Compatibility: Seamless Integration with a wide range of dental adhesives and workflows.
• Efficiency: Save time without sacrificing precision. The flip-top cap design guarantees efficient application while providing a controlled single drop per procedure.

• 1 x 5ml SensiGuard Desensitizer Bottle