Dental Porcelain Etch Gel 9.5% Acid Etchant for Crown Veneer 2.5ml/Syringe. It is used on ceramic based crown,veneer,inlay and onlay. 9.5% Porcelain Etch is an Etchant to make porcelain surface treatment. It can roughen the surface of porcelain and enhance the bonding strength.
Dental Visible Light Curing Universal Dentin Enamel Resin Bonding Adhesive 5ml/Bottle. Visible light curing is a resin adhesive for dentin and enamel. This product is a one-component liquid, and its main ingredients include UDMA and other multifunctional methacrylic resins. It does not contain solvents and inorganic fillers, and is safe and harmless to the human body. The product is a light-curing adhesive material, which is clinically used for the bonding of dentin and enamel. Suitable for bonding resin materials and ceramic materials.
| Overview for Porcelain Etch Gel 9.5% Acid Etchant |
- 9.5% Porcelain Etch is an Etchant to make porcelain surface treatment.
- It can roughen the surface of porcelain and enhance the bonding strength.
- It is used on ceramic based crown,veneer,inlay and onlay.
|
| Packing List for Porcelain Etch Gel 9.5% Acid Etchant |
| Refill: |
2.5ml/syringe |
| Disposable Tips: |
3 Pcs |
| Overview for Visible Light Curing |
-
Scope of application: Used for bonding dentine and enamel with resin and ceramic materials.
- Clinical operation steps: Pretreatment of caries and pulp protection. Use 37% phosphoric acid etchant for treatment, then clean it thoroughly with water, and dry it thoroughly with an oil-free air gun. Apply a layer of adhesive evenly on the tooth surface with a small brush. Make the adhesive layer even as far as possible with the wind power of the air gun. Irradiate with an oral light curing light source of 300mW/c㎡ for 20 seconds to cure the adhesive. Please use the composite resin filling material according to the original manufacturer's instructions, as well as the subsequent grinding and reconstruction processes.
- Precautions: During clinical use, the lip and adjacent teeth should be well isolated and protected. Avoid contact with eyes, mucous membranes and skin. Phenols, clove oil and zinc oxide can not be used as the bottom material of the first layer,because clove oil contains polymerization inhibitor "phenolic substances", which will directly affect the degree of polymerization of the adhesive. During the curing operation, the distance between the surface of the light curing lamp and the adhesive should be kept below 2mm, but it should not be in contact with the material. Before applying adhesives and composite resin fillings, the tooth treatment surface should avoid contamination by water and other impurities. It is not suitable for pulp capping, and patients who are allergic to resin should not use it.
- Environment: This product is operated at room temperature.
- Storage Conditions: This product should be stored in a cool and dry place at 2°C~28°C, avoiding direct sunlight.
- Shelf Life: This product is valid for 2 years, please do not use expired product.
- Contraindications: Patients with a history of allergy to methacrylate resins are contraindicated.
|
| Specification for Visible Light Curing |
- Indication for use: It is suitable for bonding of enamel and dentin. Ceramic veneer/crown/inlay and other indirect restoration bondings.
- Advantages: High bonding strength and long lasting durability. Easy infiltrate to dentin tubules. Reduce the risk of post-operative sensitivity. Compatible with all light cure restoratives. Time saving and easy to use.
|
| Packing List for Visible Light Curing |
| Refill: |
5 ml/Bottle |
| Instruction: |
1 Pc |
