Temporary Filling Material

• Light Curing temporary Composite Resin Used before dental prosthetic installation as temporary filling material to isolate prepared dental cavities from the extreme oral conditions.
• Light curing composite resin in adequate release  to be directly discharged to the dental cavities through disposable tip for easy apply.
• No easily deviation till dental prosthetic installation.
• Singly and wholly removed.
• No dentritus inside dental cavities after removal.
• Excellent sealing ability adhesive to the side of dental cavities.
• Easy checks for leftover after removal.
• Elasticity allows masticatory some degree.

• Temporary restoration for inlay, on lay cavity.
• Temporary obturation of implant screw access canals.
• Blocking temporary sealing，Excellent sealing ability.
• The filling color is blue.
• Expires in 3 year.
• Temporary Light Cure Cuomposite is not indicated for use as temporary crown and bridge material.
• Composition: Inorganic and organic filler in a matrix of multifunctional acrylates; catalysts, stabilizers, additives.
• Free from methyl methacrylate and peroxides.
  
• Technical specifications: Shore-D hardness≥40.

Temporarily fill the cavity:

• Preparation, relining and impression taking are done as usual.
  
• Clean and dry the cavity.
• Place and model a sufficient amount of DX.TEMP into the cavity using a suitable instrument.
• Light-cure layers with a thickness of up to 5 mm for 20 seconds, layers with a thickness of up to 7 mm for 40 seconds. Fill and light-cure deeper cavities in layers.
  
• Remove excesses, shape and finish as usual. Polishing can be done with a polishing paste using polishing cups or discs.

Removal of the temporary inlay:

• Insert a suitable instrument such as a probe or a scaler into the temporary inlay and extract the material from the cavity, preferably in one piece.
  
• Clean the cavity with a rubber cup/a small brush and cleaning paste.