Woodpecker LED G Built-in Curing Light. Connect to Dental Unit. Three Modes: Full Power, Ramping, Pulse. 360 Degree Rotary. Resin not less than 4mm in 10 seconds. Wave Length 385nm-515nm Wide Spectrum. 1200mW/cm2 Light Intensity. Ergonomics Design. FDA Approved. One Year Warranty.
Features
- FDA and CE0197 Certificated.
- Sealed, connect to dental unit.
- Three working modes: Full power, Ramping, Pulse
- 360 Degree rotary head, extend the possibility.
- Ergonomics design, optimize the hand-grip use.
- High power blue light LED.
- This device can cure composite resin not less than 4mm in 10 seconds.
-
LED G adopts the principle of ray radiation to solidify the light-sensitive resin by shooting at it in a short time. This device is used to restore teeth and solidify material for whitening teeth.
Technical Parameter
- Power input: 100V to 240V~ 50Hz/60Hz
- Wave length: 385nm-515nm (Wide Spectrum)
- Light intensity: 1000mW/cm2~1200mW/cm2
- Illumination range: diameter appr. 8mm
- Optical fiber dimensions: 12mm diameter, 22mm depth
- Dimensions: 1”×1”×10.2” (26×25×260mm)
- Net weight: 4.8oz (135g)
Three Working Modes
- Full power: the blue light radiates in full power.
- Ramping: The blue light power increases stronger continually, after five seconds reaches to the highest power.
- Pulse: The blue light works on the pulse condition. During the operation, aim blue solidification. The working time of all modes is ten seconds.
*Intermittent operation instrument: after work 200 seconds, stop 20 seconds, and then work 20 seconds, stop 20 seconds, work in the rule as above circularly.
