Dental Fluoride Varnish 5% Sodium (0.4g x 50) Three Flavors

Dental Fluoride Varnish 5% Sodium (0.4g x 50) Three Flavors. Fluoride Varnish - An innovative fluoride varnish specially designed for treating tooth hypersensitivity, which can be directly applied to moist enamel and dentin surfaces without isolation while achieving high adhesion efficiency. Its unique 5% sodium fluoride formula quickly forms a protective layer that effectively blocks nerve stimulation and alleviates sensitivity symptoms. The product is specially enhanced with a calcium-phosphate ion sustained-release system that promotes tooth remineralization while desensitizing, ensuring long-term dental health maintenance.

Overview

Fluoride Varnish - An innovative fluoride varnish specially designed for treating tooth hypersensitivity, which can be directly applied to moist enamel and dentin surfaces without isolation while achieving high adhesion efficiency.
Its unique 5% sodium fluoride formula quickly forms a protective layer that effectively blocks nerve stimulation and alleviates sensitivity symptoms.
The product is specially enhanced with a calcium-phosphate ion sustained-release system that promotes tooth remineralization while desensitizing, ensuring long-term dental health maintenance.
Available in three flavors - Mint, Strawberry, and Melon - to meet children's preferences.

Indications

For use as a fluoride-containing coating that:

Prevents dental caries.
Treats hypersensitive teeth.
Treats exposed dentin and root surface sensitivity.

Notes

Within 4 hours after application: Avoid eating, drinking, and brushing teeth. Overnight application yields optimal results. The coating continuously releases fluoride ions during this period; premature contact may compromise efficacy.
Dietary restrictions: If drinking is necessary, only small amounts of room-temperature water are permitted.
Strictly avoid:
• Hot beverages (>40°C).
• Alcohol-containing products (including alcoholic mouthwashes).
Oral hygiene: After 4 hours, teeth may be gently cleaned with a toothbrush or floss.
Avoid aggressive scrubbing of treated areas.
Fluoride product restrictions: On the day of application, avoid using other fluoride products (e.g., gels, mouthwashes). For patients taking daily fluoride supplements (e.g., fluoride tablets), discontinue use for 2-3 days to prevent fluoride overexposure.

Specifications

Model:	Fluoride Varnish DX.FLUOR
Flavors:	Mint, Strawberry, Melon
Shelf life:	3 Years
G.W:	80g

Package

Pack:	50 Pouches (0.4g/pouch)
Brush:	1
User Manual:	1

$36.98

Dental Gutta Percha Cutter Endo Measuring Ruler Span Scale

1 Pc 5 Pcs 10 Pcs

$7.63

Dental Gutta Percha Endodontic Obturation System Heated Pen With 2 Heating Tips

Dental Gutta Percha Endodontic Obturation System Heated Pen With 2 Heating Tips. This Wireless Endodontic Obturation Pen provides a high-efficiency solution for root canal fillings, capable of reaching temperatures up to 220°C in just 3 seconds. Designed for maximum clinical flexibility, it features a 360° touch-to-heat activation ring for effortless multi-angle operation. With four adjustable temperature settings, the system is compatible with a wide variety of gutta-percha materials, ensuring precise softening and compaction. The kit includes two heating tips, combining rapid performance with an ergonomic, cordless design for optimized endodontic workflows.

Overview

Rapid Heating: Reaches 220°C in just 3 seconds for immediate clinical efficiency.
360° Activation: Touch-sensitive ring allows effortless heating from any hand position or angle.
4-Stage Temp Control: Multiple heat settings to suit various gutta-percha materials and techniques.
Precise Tips: Includes two high-grade heating tips for accurate canal compaction.
Cordless Ergonomics: Lightweight, wireless design ensures maximum maneuverability during endo procedures.

Notice

The heating needle must be cooled to room temperature before cleaning the heating needle.
The heating needle can be sterilized by high temperature and high pressure, other parts are not allowed.
Do not use non-volatile disinfectants or similar disinfectants to avoid corrosion of the instrument and serious damage to the product.

Specification

Model:	R21
Size:	100x100x195mm
Working Temperature:	150℃, 180℃, 200℃, 220℃
Heating Plunger:	F (tip diameter: 0.45mm) FM (tip diameter: 0.50mm)
Power Input:	AC 110~220V 50/60Hz
Power Output:	DC5V -- 1A
Internal Power Supply:	DC 3.7V 2800mAh
Type of Protection Against Electric Shock:	Class II
Degree of Protection Against Electric shock:	Type C
Operating Conditions:	Operating temperature: 5℃ ~ +40℃ Operating humidity: 10%RH ~ 80%RH Atmospheric pressure: 50kPa ~ 106kPa
Packing Size:	120x210x68mm
Weight(G.W.):	460g

Packing List

1×main unit
2×heating needle
1×battery
1×charger base
1×power adapter
1×English Instruction manual

1 Set 5 Sets 10 Sets

$72.65

Dental Gutta Percha Pen Heated Tips 4pcs/Kit

1 Set 5 Sets 10 Sets

$30.69

Dental Gutta Percha Pen Heated Tips XF FM F M 1pc/Pack

1 Pc 5 Pcs 10 Pcs

$12.08

Dental Gutta Percha Tooth Gum Cutter A-BLADE Ⅱ with 4 Tips

Dental Gutta Percha Tooth Gum Cutter A-BLADE Ⅱ with 4 Tips, Wireless Mode, Operation, Flexible, Convenient. Rapid Heating, Highest Temperature of 260º C. Design Ingenious, Shape Beautiful, Conform to The Human Body Engineering. High-capacity, Charging Time 3 Hours.

Overview of Gutta Percha

Design ingenious , Shape beautiful , Conform to the human body engineering
Wireless mode , Operation ,flexible, convenient
Rapid heating , highest temperature of 260º C
High-capacity can be charged Nickel cadmium battery, charging time 3 hours
Fever needle can be sterilized by high temperature and high pressure , repeated use
Charging： 1. First,charge the instrument by connecting the charging station to a mains power socket. 2. Plug the handpiece into the socket in the charging station. While the instrument is charging,the LED lights up on the handpiece.
Use: Fit a cutting tip onto the handpiece. Make sure that the angle of the tip is pointing in the opposite direction to the operating button,This makes work easier.

Important of Gutta Percha

Never bend the tip while it is still in the handpiece.
1. Insert the cutting tip into the cavity while it is cold (without pressing the operating button).The gutta-percha point to be cut off must be encircled by the loop of the cutting tip.
2. As soon as the cutting tip is located directly on the canal access,press the operating button.
3. The tip heats up in seconds and the gutta-percha point can be quickly and cleanly removed.
4. After the point has been cut off ,release the operating button. The cutting tip immediately cools down and can be removed from the patient＇s mouth .The operating button is a “contact button” which only switches the button is released,the instrument switches off.
5. Remove the cutting tip from the handpiece after use.

Overview of Tips

Packing: 4 Pcs/ pack
Net Weight: 10.4g
For Gutta Percha Point Heating Cutter Tooth Gum

Warning of Tips

Before each patient, the cutting tips must be cleaned and sterilized
Any residues remain on the tip can be removed by cotton wool
When used properly, the tips can be autoclaved on more than 25 times(at 121℃ at least 20 minutes and at 132℃/134℃ at least 5 minutes).

Package List of Gutta Percha

Package:	1x Main Unit 4x Tips 1x Box 1x English Manual
Charger Voltage:	AC110V or 220V 50/60HZ
Battery:	1.2V 2400mAh
Power:	2.5W

1 Set 5 Sets 10 Sets

$26.99

Dental Heated Gutta Cutter Tips 4Pcs/pack - pairaydental.com

Dental Heated Gutta Cutter Tips 4Pcs/Pk

1 Pack 5 Packs 10 Packs

$6.45

Dental Heat‑Activated Large Taper NiTi Rotary Endodontic Files 25mm F3/F4/F5 6pcs/Pack

1 Pack 5 Packs 10 Packs

$8.99

Dental High Speed Handpiece Adapter Converter 2 Holes to 4 Holes

1 Pc 2 Pcs 5 Pcs 10 Pcs

$3.27

Dental High Speed Handpiece Adapter Converter 4 Holes to 2 Holes

1 Pc 2 Pcs 5 Pcs 10 Pcs

$3.27

Dental High Speed Handpiece LED Push Button Ceramic Bearing 4 Hole Air Turbine

1 Pc 5 Pcs 10 Pcs

$65.20

Dental Titanium High Speed Handpiece LED Fiber Optic Standard Head 4-Water Spray & 6 Holes Quick Coupler - pairaydental.com

Dental High Speed Handpiece Titanium LED Fiber Optic Standard Head 4-Water Spray & 6 Holes Quick Coupler

Dental High Speed Handpiece Titanium LED Fiber Optic Standard Head 4-Water Spray & 6 Holes Quick Coupler. This Dental Titanium High Speed Handpiece features a wear-resistant titanium alloy body and imported ceramic bearings, engineered for ultra-quiet, high-intensity clinical use. Equipped with bright fiber optic illumination and an efficient four-water spray system, it ensures excellent shadow-free visibility and stable cooling. It is fully autoclavable up to 135°C. Fit international brand NSK.

6 Holes Quick Coupler. This High-Quality LED Quick Coupler is precision-engineered for seamless compatibility with NSK® style fiber optic high-speed handpieces. Featuring a full 360-degree swivel, it grants dentists effortless flexibility and significantly reduces wrist fatigue. Built with a 6-hole connection, this durable coupler ensures a stable, leak-free delivery of air, water, and brilliant fiber optic illumination.

High Speed Handpiece Overview

Titanium Alloy Body: Lightweight, scratch-resistant, and ergonomically balanced to reduce hand fatigue.
Imported Ceramic Bearings: Delivers smooth, low-noise rotation and extended clinical lifespan.
Fiber Optic & 4-Water Spray: Provides shadow-free intraoral illumination and optimal bur cooling.
Standard Head: Choose Standard for maximum torque.
135°C Autoclavable: Fully steam-sterilizable to meet strict clinical hygiene standards.
Low-Noise Design: Precision-fitted internal seals and connectors ensure smooth, quiet airflow and minimize clinical operating noise.

Specifications

Head Size:	Standard head: w11.25mm / h13.3mm
Bearing Type:	Ceramic Bearing
Air Pressure:	2.5-3.0Kpa
Chuck Type:	Push Button
Power:	35w-40w
Noise:	≤55dB
Rotation Speed:	290,000~360,000rpm
Bur Applicable:	Ø1.59- Ø1.6mm
Water Spray:	Internal four way spray
Warranty:	1 year
Autoclavable:	135°C

Package

Handpiece	*1
Wrench	*1
Needle	*1

6 Holes Quick Coupler Overview

NSK® System Compatibility: Form-fitted to connect flawlessly with standard 6-hole NSK® style fiber optic handpieces.
360° Swivel Design: Allows smooth, continuous handpiece rotation to optimize clinical angles and reduce hand fatigue.
Brilliant LED Cold Light: Delivers high-brightness, shadow-free intraoral visibility when connected to your fiber optic tubing.
Premium Leak-Free Build: Crafted with high-grade materials and precision internal seals for reliable, long-lasting clinical performance.

1 Pc 3 Pcs 5 Pcs 10 Pcs

$112.49

Dental Titanium High Speed Handpiece Mini/Standard Head LED Fiber Optic 4-Water Spray & 4/6 Holes Quick Coupler - pairaydental.com

Dental High Speed Handpiece Titanium Mini/Standard Head LED Fiber Optic 4-Water Spray & 4/6 Holes Quick Coupler

Dental High Speed Handpiece Titanium Mini/Standard Head LED Fiber Optic 4-Water Spray. This Dental Titanium High Speed Handpiece features a wear-resistant titanium alloy body and imported ceramic bearings, engineered for ultra-quiet, high-intensity clinical use. Equipped with bright fiber optic illumination and an efficient four-water spray system, it ensures excellent shadow-free visibility and stable cooling. Available in both Mini and Standard heads, it is fully autoclavable up to 135°C.

4/6 Holes Quick Coupler. Dental Quick Coupler Series is precision-engineered for KAVO-style MULTIflex high-speed handpieces. Featuring an innovative electrodeless lamp design, it delivers an ultra-long lifespan that drastically reduces bulb replacement frequency while ensuring stable power, water, and air transmission.

High Speed Handpiece Overview

Titanium Alloy Body: Lightweight, scratch-resistant, and ergonomically balanced to reduce hand fatigue.
Imported Ceramic Bearings: Delivers smooth, low-noise rotation and extended clinical lifespan.
Fiber Optic & 4-Water Spray: Provides shadow-free intraoral illumination and optimal bur cooling.
Mini/Standard Head Options: Choose Mini for superior posterior access or Standard for maximum torque.
135°C Autoclavable: Fully steam-sterilizable to meet strict clinical hygiene standards.
Low-Noise Design: Precision-fitted internal seals and connectors ensure smooth, quiet airflow and minimize clinical operating noise.

Specifications

Head Size:	Standard head: w11.25mm / h13.3mm Mini head: w10.08mm / h10.85mm
Bearing Type:	Ceramic Bearing
Air Pressure:	2.5-3.0Kpa
Chuck Type:	Push Button
Power:	35w-40w
Noise:	≤55dB
Rotation Speed:	290,000~360,000rpm
Bur Applicable:	Ø1.59- Ø1.6mm
Water Spray:	Internal four way spray
Warranty:	1 year
Autoclavable:	135°C

Package

Handpiece	*1
Wrench	*1
Needle	*1

4/6 Holes Quick Coupler Overview

Electrodeless Lamp Technology: Delivers extended operational longevity, significantly cutting down on maintenance and downtime.
6-Hole (LED Cold Light): Utilizes the dental chair's fiber optic system to supply high-brightness, shadow-free intraoral illumination.
4-Hole (LED Self-Illuminating): Features a built-in air generator that powers the LED automatically, instantly upgrading standard 4-hole tubings to LED light.
360° Swivel Quick Connect: Allows smooth, effortless rotation of the handpiece to substantially reduce wrist strain.
Warranty: 1 year
Package: Motor*1

1 Pc 3 Pcs 5 Pcs 10 Pcs

$112.49

Dental Hygiene Prophy Handpiece Air Motor 4 Holes with 3pcs 4:1 Nose Cones

1 Pc 5 Pcs 10 Pcs

$61.10

Dental Imaging Phosphor Plate Size 2# for Digital X-ray

1 Pc 2 Pcs 5 Pcs

$68.80

Dental Implant Bone Grafting Instruments Stainless Steel 6pcs/Set

1 Set 5 Sets 10 Sets

$37.44

Dental Implant Colorful Electronic Torque Universal Tools Kit 16pcs Drivers With Wrench 10-50Ncm

1 Kit 5 Kits 10 Kits

$104.96 $115.59

Dental Implant Colorful Universal Restoration Tool Kit 14pcs Drivers With Wrench 15-60Ncm and Carrying Device

1 Kit 5 Kits 10 Kits

$101.24

Dental Implant Locating Guide Rule

1 Set 5 Sets 10 Sets

$16.80

Dental Implant Measuring Gauge Orthodontic Sliding Caliper 0-80mm

1 Pc 5 Pcs 10 Pcs

$16.48

Dental Implant Motor Ultrasonic Bone Cutter Machine & Piezo Surgery Touch with LED 20:1 Contra Angle And Two Handles

Dental Implant Motor Ultrasonic Bone Cutter Machine & Piezo Surgery Touch with LED 20:1 Contra Angle And Two Handles. Multi-functional integration. Combines dental implant placement, low-power dental restoration, and ultrasonic bone cutting for minimally invasive dental surgery. Ultrasonic bone cutter features compatibility with over 20 different working tips, 4 operating modes, and 10 power levels. 16:1, 20:1, and 27:1 ratios, catering to diverse surgical applications. The ultrasonic bone cutter accommodates over 20 distinct working tips, four operational modes, and ten adjustable power levels to meet minimally invasive dental surgery requirements across various oral locations. Surgical parameters are automatically stored and recalled, eliminating repetitive settings. The software employs user-friendly, intelligent algorithms.

Overview

Multi-functional integration. Combines dental implant placement, low-power dental restoration, and ultrasonic bone cutting for minimally invasive dental surgery. Multiple programme modes freely configurable for implant placement, restoration, bone cutting, periodontal treatment, root canal therapy, and cleaning. Implant restoration function compatible with 10 types of bending heads (1:1, 1:2, 1:3, 1:4.2, 1:5, 3.2:1, 4:1, 16:1, 20:1, 27:1) for diverse surgical applications. Ultrasonic bone cutter features compatibility with over 20 different working tips, 4 operating modes, and 10 power levels. 16:1, 20:1, and 27:1 ratios, catering to diverse surgical applications. The ultrasonic bone cutter accommodates over 20 distinct working tips, four operational modes, and ten adjustable power levels to meet minimally invasive dental surgery requirements across various oral locations. Surgical parameters are automatically stored and recalled, eliminating repetitive settings. The software employs user-friendly, intelligent algorithms.
Touchscreen display. Features a 7-inch true-colour TFT capacitive touchscreen with a visualised interface and ergonomic touch design, supporting multi-touch input with responsive feedback. The self-illuminating screen offers unrestricted viewing angles and adjustable brightness, ensuring optimal visibility under both bright and low-light conditions.
Multi-function foot control. Artificial intelligence foot control algorithm ensures smooth motor speed and ultrasonic start/stop control. Enables seamless switching between surgical modes, water flow, and power settings for intuitive operation.
Dental implant placement, restorative procedures, minimally invasive bone cutting, periodontal surgery, root canal therapy, and cleaning modes all support external connection to physiological saline or sterile water. Prevents backflow, reducing cross-infection risks.
Host unit includes built-in operating instructions alongside ten common error prompts and alarm interfaces, providing immediate alerts for incorrect operation and enhanced overall system protection.
Implant and micro-power handpieces, along with ultrasonic transducer handpieces, are autoclavable to reduce cross-infection risks, providing greater peace of mind during procedures.
All implant, micro-power, and ultrasonic transducer handpieces incorporate high-brightness self-illuminating LEDs with multi-level brightness adjustment, enhancing surgical visualisation and precision.
Implant and micro-motor handpieces employ next-generation high-efficiency, low-noise, high-torque brushless DC motors. Maximum speed: 40,000 rpm (1:1 ratio). Maximum torque: 80 N·cm (20:1 ratio). Ultrasonic bone cutters utilise high-performance crystal transducers. The main unit incorporates low-power intelligent control algorithms for precise motor speed and ultrasonic output regulation, resulting in reduced overall power consumption and operating temperature.
Incorporates an integrated peristaltic pump with multi-level water flow settings for precise hydration control. Features a streamlined, integrated housing desige.

Technical Specifications

Model:	IMPLANT Surg Plus
Host specifications:	Input power: 150VA Weight：4.35Kg Power supply frequency: 50/60Hz Dimension：286mm×252mm×113mm Power supply voltage：AC 100-240V
Dental ultrasonic handpiece:	Dimension: ∅ 21.5mm×110mm Tail cord length：1.8m
Motor specifications:	Rotating speed range: 200~40000rpm Torque range：5-80N·cm (Speed ratio：20:1) Input voltage：DC30V Dimension: ∅ 21.5mm×105mm Tail cord length：1.8m
Foot pedal controller specifications:	Tail cord length：2.0m
Ultrasonic working frequency:	24kHz~36kHz
Flow:	30~110ml/min
Operation environment:	a) Environment temperature: 0°C~+40°C b) Relative humidity: 30%~75% c) Atmosphere pressure: 70kPa~106kPa d) Temperature in the water inlet of water-cooling equipment is not higher than 25°C
Intermittent operation equipment:	Device for ultrasonic intermittent operation: 60s ON, 10s OFF

Packing List

Implant unit:	1 Pc
Foot pedal:	1 Pc
Piezosurgery handle:	1 Pc
Tips:	7 Pcs
20:1 LED contra angle :	1 Pc
Piezosurgery wrench:	1 Pc
Silicone base:	2 Pcs
Saline water tube:	2 Pcs
Power line:	1 Pc

$1,519.00

Dental Implant Periosteal Elevator Instrument Double Ends

1 Set 5 Sets 10 Sets

$8.39

Dental Implant Position Locator Stainless Steel

1 Kit 3 Kits

$45.36

Dental Implant Screw Drivers Kit 6pcs

1 Kit 5 Kits 10 Kits

$52.49

Dental Implant Stability Measurement Device

Dental Implant Stability Measurement Device. It is a stability measuring device that uses tapping method. Easy to use due to simple controlling method. Fast measuring time less than 3 seconds. Safe measurement due to slight tapping technique and auto safety system. Available to check possibility of implant failure at in earlier stages.

Instructions for Use

Overview

Used to measure implant stability, continuous monitoring of implant stability can help determine bone resorption and guide the selection of the great repair timing.
The impact force is relatively small, approximately equal to 0.9N.
Simple and fast measurement of accurate values.
It is a stability measuring device that uses tapping method, which measures the time of the Tapping Rod of the device contacting the implant for dentistry and dental implantology or oral cavity, or abutment, to measure the stability of the placed implant.
Convenient usage due to small and light design. Easy to use due to simple controlling method.
Fast measuring time less than 3 seconds. Safe measurement due to slight tapping technique and auto safety system (tapping stops after tapping twice when Osseointegration is unstable, otherwise taps up to 6 times.).
Available to check possibility of implant failure at in earlier stages.

Note: Maintain the contact angle within the range of 0° ~ 30°, the measured value is more accurate when the degree between the healing abutment and the Front Guide is closer to perpendicular.

Instructions for Use

Sterilization

The surface of the host shell should be wiped with medical alcohol ，and should not be disinfected under high temperature and pressure.
Front guide,tapping road, allen wrench can be cleaned and then disinfected under high temperature and pressure.
Do not use disinfectant spray to prevent the disinfectant from penetrating into the product
Do not use engine oil or lubricants to lubricate the front guide and impact sensitive parts of the striking road.

Measuring Process

Take out the disposable seeve and put it on the handpiece before use
Turn the power on by pressing the ON/OFF switch.
Carefully position the tip of the Tapping Rod to the upper edge of the healing abutment while being cautious not to push the abutment.
Maintain the contact angle within the range of 0° ~ 30° to upward
When the Tapping Rod of the handpiece is located 90 degree from the side part of the top of the healing abutment and the ON/OFF switch is pressed once, the tapping motion starts after 0.5 second.
The measured value is more accurate when the degree between the healing abutment and the Front Guide is closer to perpendicular.
Check the numbers displayed on the LCD screen of the device.
Due to the different bone widths in different directions of the implant, the measurement data will be biased. Try to measure the stability value from multiple angles to get a reasonable value.

Note

If the contact angle is off the range (0° ~ 30° . upward from the surface), an alert sound will be on and the LCD screen displays "TOO LOW" or"TOO HIGH", the handpiece will not operate. In this case, tilt the deviceuntil the contact angle is back in the range, and then, try measuring again.
Measurement error may occur if the tip of the Front Guide applies too much force to the healing abutment or is too far away from the healingabutment during measurement.
Empty tapping-motion results in no reading or obvious data errors.

Checking Measured Value (iST scale)

Measured value is similar to ISQ scale:
-above 60: bridge recommended.
-above 70: single case loading possible.
A range of measured value is displayed as a number between 01 to 99.
Color of the number appears as Red (1 to 59), Yellow (60 to 64), Green(65 to 99).
Green light below the LCD Display is the status bar.
Lower the measured value (iST scale), greater the implant mobility (weaker the degree of osseointegration).

Sterilization

The surface of the host shell should be wiped with medical alcohol ，and should not be disinfected under high temperature and pressure.
Front guide,tapping road, allen wrench can be cleaned and then disinfected under high temperature and pressure.
Do not use disinfectant spray to prevent the disinfectant from penetrating into the product
Do not use engine oil or lubricants to lubricate the front guide and impact sensitive parts of the striking road.

Specifications

Battery Capacity:	850mAh
lnput:	100-240V~50/60Hz
Output:	5V 1A
Environment Temperature:	+5℃ to +40℃
Relative Humidity:	10%~93%
Atmosphere Pressure:	70kPa to106kPa
Operation Model:	Continuous Operation

Performance

Accuracy:	Display value ± 3
Tapping Speed:	0.5 sec. / 1 time
Tapping Strength:	≤1.0 N to 1.3N
Number of Tapping:	Taps 2~4 times until the measured value of 1~59. After 60~ 99, the device taps 6 times in order to measure the stability.

$789.99 $1,049.00

Dental Implant Stability Monitor ISQ Tester for Osseointegration Measurement

$393.19

Dental Implant Surgical Brushless Motor Multi Function Color Touch Screen With 20:1 LED Contra Angle 80Ncm

Dental Implant Surgical Brushless Motor Multi Function Color Touch Screen With 20:1 LED Contra Angle 80Ncm. Auto-Calibration Function. 8 setting programs. LED light source illumination. LED lighting ensures visibility. Illumination and sound can be adjusted. Flexible multi function foot pedal, could achieve the most of operating functions. There are 6 gears water flow,click the button each time, increase water volume. Motor and cable can be sterilized at high temperature and pressure. Built in common error prompt and alarm interfaces, timely remind the wrong operation, better protect the machine.

Note: The foot pedal is with a cord, it is not a wireless foot pedal.

Overview

Surgical brushless motor
8 setting programs
20:1 Fiber Optic Contra Angle
LED light source illumination
Warranty
Main unit: 2 years
Motor and contra angle: 1 year

Features

Color touch screen
The large size screen ensures that the treatment parameters are visible. Graphical operation steps, intuitive and clear, easy operation, simple and flexible, humanized touch design, responsive.
Multi function
For implant, restoration, extraction of impacted teeth, orthopaedic surgery.
8 Program memory function for setting setting speed, torque, compatible with various contra angle or straight handpiece, such as 20:1 16:1 27:1 4:1 3.2:1 1:1 1:3 1:4.2 1:5
Motor Auto-Calibration function (implant)
Operate safely with high precision thanks to the surgical motor, low noise and vibration, powerful.
A new generation of motors with torque up to 80Ncm
High performance brushless motor, high torque and wide speed range for all kinds of treatment.
LED lighting ensures visibility
Helps clinicians focus more on the treatmenet area and make surgery more accurate.
Illumination and sound can be adjusted
Flexible multi function foot pedal
Could achieve the most of operating functions.
Smooth Irrigation Pump
There are 6 gears water flow,click the button each time, increase water volume.
Built in user manual
Simple and convenient operation.
Motor and cable can be sterilized at high temperature and pressure

Warnings: Plug must be inserted when the motor is sterilized.

Built in common error prompt and alarm interfaces
Timely remind the wrong operation, better protect the machine.

Technical

Maximum power:	150W
Power supply:	AC110v/60HZ,AC220V/50HZ
Torque:	5-80Ncm
Motor speed:	300-40000rpm
Infusion flow(Maximum):	135ml/min

Package

Implant unit:	1
E-type motor:	1
LED contra angle handpiece:	1
Foot pedal:	1
Motor stand:	1
Hanger:	1
Power cord:	1
Motor cap for autoclave:	1
Irrigation tube:	2
English instruction manual:	1
Aluminum Box:	1

$980.00

Dental Implant Teeth Model Demonstration Overdenture Restoration 4 Lower Implants M6003

1 Set 5 Sets 10 Sets

$35.30

Dental Implant Teeth Model Demonstration Overdenture Restoration 4 Upper Implants M6001X

1 Set 5 Sets 10 Sets

$35.30

Dental Impression Mixing Gun Dispenser with Bite Registration Material

Dental Universal Impression Mixing Gun Dispenser for 10:1 / 4:1 Ratio 50ml.The Impression Mixing Guns are a vital accessory for the application of impression materials in cartridges such as silicone, cements and resins. 10:1/4:1 ratio for 10:1 or 4:1 temporary crown material. This can be cleaned sterilized by cold disinfection & immersion. Automatic mixing, easy to use.

Dental Bite Registration Material Fast Set Mixing Tips 50ml*2. A-Silicone for Bite Registration is indicated for making occlusal registrations. Bite registration captures the precise occlusal relationship between maxillary and mandibular arches.Rapid-setting formula reduces clinical time while enhancing patient comfort.

Overview for Impression Mixing Gun

Universal for 10:1 & 4:1 Cartridges Gun housing designed in 4:1 profile, compatible with both 4:1 and 10:1 ratio cartridges.
Automatic mixing and delivery of impression materials made this handgun cartridge dispenser easy to use.
This can be cleaned sterilized by cold disinfection & immersion.
Dispensing any-brand dental impression/materials, bite registration materials, soft/hard relining materials, dual-cured composite resins, self-curing temporary crown & bridge resins etc.
10:1/4:1 ratio for 10:1 or 4:1 temporary crown material.

Overview for Bite Registration Material

Bite registration captures the precise occlusal relationship between maxillary and mandibular arches.Rapid-setting formula reduces clinical time while enhancing patient comfort.
With high Shore A hardness yet optimal flexibility for easy adjustment, it delivers rigid dimensional stability – ensuring accurate transfer of intercuspal position (ICP) and centric relation (CR) to the laboratory without distortion.

Advantages for Bite Registration Material

4-Week Stability | Zero Distortion: Impressions stay dimensionally stable for 4 weeks without shrinkage or cracks – lab receives perfectly accurate models every time.
Instant Set | Boost Efficiency 40%: No heating needed – use directly from gun. Sets in-mouth in 90 seconds, saving 5+ minutes per procedure (treat 5+ more patients daily).
Natural Bite | Lab-Grade Hardness: Cures to Shore 90 hardness – patients bite comfortably with zero positioning effort, ensuring perfect occlusion transfer.
Unbreakable | Master Complex Cases: High tear/tensile strength (rebounds if deformed). Flows seamlessly around implants, gaps & full arches.
Safe + Proven Value | 200+ Clinics Trust: Biocompatible & non-toxic.Affordable lab-grade precision – trusted by 200+ clinics since launch.

Specifications for Impression Mixing Gun

Item Type:	Dental Impression Mixing Dispensing Gun
Suitable Cartridge:	50ml(Not include)
Available Model:	10:1 / 4:1 Ratio
Package contents:	Dental Mixing Dispensing Gun 1 Pc

Specifications for Bite Registration Material

Model:	A-Silicone for Bite Registration (Dispenser Mix/Fast Set)
Shade:	Light blue
Type:	Fast set
Certification:	CE、FDA
Package weight:	180g

Packing List for Bite Registration Material

A-Silicone for Bite Registration:	2pcs, 50ml/Pcs
User Manual:	1 Pc

$35.99

Dental Impression Plastic Trays Autoclavable 10pcs/Kit

1 Set 5 Sets 10 Sets

$9.90

Dental Impression Plastic Trays Kit Autoclavable 12pcs/Kit

1 Set 5 Sets 10 Sets

$10.09

Dental Impression Trays Perforated & Autoclavable Plastic 12 Pcs/Bag 10 Sizes Available

1 Bag 5 Bags 10 Bags

$7.61

Dental Injection Aspirsting Syringe Stainless Steel 1.8ml Hook /Sharp Head

1 Pc 5 Pcs 10 Pcs

$10.71

Dental Instrument Autoclave Divided Tray Plastic Separate Setup Organizer

1 Pc 5 Pcs 10 Pcs

$5.55

Dental Instrument Disinfection Box Sterilization and Autoclavable Rack Tray 5 /10 /20 Grids

1 Pc 5 Pcs 10 Pcs

$12.19 $15.63

Dental Instruments Sterilization Box Storage Rack 4 Holders

+2

1 Pc 5 Pcs 10 Pcs

$8.36

Dental Internal Channel Contra Angle Head FG Type Burs 1.6mm

1 Pc 5 Pc 10 Pc

$27.91

Dental Intraligamental Anesthetic Syringe Injection

1 Kit 5 Kits

$52.33

Dental Intraoral Camera 17 Inch HD Clinical Display Monitor Wi-Fi QR Transfer with Adjustable Stand

Dental Intraoral Camera 17 Inch HD Clinical Display Monitor Wi-Fi QR Transfer With Adjustable Stand. Supports Wi-Fi forimage/video transfer and multi media playback. Equipped with AV/HDMI/VGA/USB ports. QR-based wireless sharing to PC or mobile for easier documentation and communication. Single/quad display for case comparison and treatment progress evaluation. Capture, record, and mode switching integrated into the handle for smoother workflow. Stable, lightweight stand with adjustable height and angle for flexible clinical positioning. 56mm Universal Clamp, fits most dental chair arms; fast installation with minimal space footprint.

Overview

17-inch HD Display – Wider clinical view with improved clarity for diagnostic observation.
Multi-language Operating System – Adaptable for global clinics with fast language switching.
Wi-Fi QR Transfer – QR-based wireless sharing to PC or mobile for easier documentation and communication.
Quad-Image View Mode – Single/quad display for case comparison and treatment progress evaluation.
Multi-function Handle Control – Capture, record, and mode switching integrated into the handle for smoother workflow.
Aluminum Alloy Adjustable Stand – Stable, lightweight stand with adjustable height and angle for flexible clinical positioning.
56mm Universal Clamp – Fits most dental chair arms; fast installation with minimal space footprint.
100×100 mm & 75×75 mm VESA Mount – Compatible with most monitors; easy integration with standard mounting systems.
Multiple AV Input Ports – Supports video and audio inputs for training, presentations, and educational demonstrations.

Specifications

lmage Sensor:	CMOS 1/4 HD sensor
Operating System:	Embedded system
Key Mode:	Five Keys control
Screen Size:	17 inches
Screen Resolution:	1280*1024
Wi-Fi Transmission:	OR code scan for mobile transfer
Storage:	Automatically saves to USB drive
Max Capacity:	Supports up to 512GB
lmage Format:	JPG
Manual Focus Range:	5mm-50mm
Pixels:	Ultra HD
Other Features:	Sensor light-off, one-click channel switch
Power Consumption:	30W

$193.48

Dental Intraoral Camera 6pcs Cold Lights Digital Oral Endoscope Auto-focus

1 Pc 5 Pcs 10 Pcs

$58.97

Dental Intraoral Camera 8 LED Light Endoscope USB 1/4 Sensor

1 Pc 5 Pcs 10 Pcs

$58.13

Dental Intraoral Camera Disposable Protection Film Sheath Sleeve 100pcs/Box

1 Box 5 Boxes 10 Boxes

$13.67

Dental Intraoral Camera Endoscope USB 8 LED Lights w/ 8GB SD Memory Card

$81.25

Dental Intraoral Camera HD USB Digital 6 LED Lights 2.0MP High Pixel

1 Pc 5 Pcs 10 Pcs

$83.59

Dental Intraoral Camera HD USB Digital 8 LED Lights 4K Mega Pixels Imaging Software

Dental Intraoral Camera HD USB Digital 8 LED Lights 4K Mega Pixels Imaging Software. Designed with dual focus buttons for quick switching between near and far focus, ensuring sharp images at different working distances. Lightweight and comfortable structure with an ergonomic grip, providing better handling experience during long-time clinical use. 4K Ultra HD Imaging, equipped with a 1/2.8" high-sensitivity sensor and 3264 × 2448 resolution, delivering clear and detailed intraoral images for accurate dental observation and diagnosis. Smart Imaging Software – Includes professional imaging software with 1/4 screen comparison, image annotation tools, and report generation functions to improve diagnosis efficiency and patient communication. Includes main unit, magnetic holder, installation software U disk, double-sided adhesive tape, and disposable isolating membrane for convenient setup and daily use.

Overview

4K Ultra HD Imaging– Equipped with a 1/2.8" high-sensitivity sensor and 3264 × 2448 resolution, delivering clear and detailed intraoral images for accurate dental observation and diagnosis.
Dual Focus Control – Designed with dual focus buttons for quick switching between near and far focus, ensuring sharp images at different working distances.
Ergonomic Design – Lightweight and comfortable structure with an ergonomic grip, providing better handling experience during long-time clinical use.
Smart Imaging Software – Includes professional imaging software with 1/4 screen comparison, image annotation tools, and report generation functions to improve diagnosis efficiency and patient communication.
Complete Accessories Package – Includes main unit, magnetic holder, installation software U disk, double-sided adhesive tape, and disposable isolating membrane for convenient setup and daily use.

Specifications

Model:	Intraoral Camera CF686-B
Sensor:	1/2.8 CMOS
Pixels:	4K Mega pixels
Output mode:	USB 2.0
Output resolution:	3264*2448
Light:	8 LED combination
Focus distance:	10~60mm
Angle of view:	105°
Supply voltage:	5V
Length of Cable:	2.8M

Packing List

USB intraoral camera:	1
Standard magnetic holder:	1
U disk (with installation software):	1
Double sided adhesive tape:	1
Disposable isolating membrane:	1

1 Pc 5 Pcs 10 Pcs

$126.21

Dental Intraoral Camera USB Digital Imaging Endoscope 6-LED Light

1 Pc 5 Pcs 10 Pcs

$50.35 $58.99

Dental Intraoral X-Ray Sensor Digital HD Image System Size 1

$599.80

Dental Intraoral X-Ray Sensor Digital HD Image System Size 2

$773.65 $919.99

Dental Lab CAD/CAM Lithium Disilicate Glass-Ceramic Block Cerec Emax LT/HT 5pcs/Box

1 Box 5 Boxes 10 Boxes

$25.88

Material:	Nickel Titanium (NiTi)
Number:	F3, F4, F5
Length:	25mm
Application:	Root Canal Treatment (RCT)
Package:	6pcs/pack

Model:	201F8
High speed handpiece:	4 way spray
Chuck type:	Push button
Air pressure:	0.22~0.3MPA
Power:	35W-40W
Rotation speed:	360,000~380,000rpm
Noise:	≤65dB
Light source:	E-genera for LED light
Head size:	φ12.3*H13.5mm
Hole:	4 Hole

Gear Ratio:	4:1 reduction
Handpiece Weight:	1.87 oz (53g)
Air pressure:	0.3MPa
Rotation Speed:	5000 rpm±10%
Power output:	5W
Noise:	≤65dB
Hole:	4 Holes
Autoclavable:	135℃ autoclavable

Electronic Torque Wrench:	10-50N.cm
Autoclavable:	135°C Autoclavable,the box can also be sterilized. Electronic handles can only be alcohol wiped on the surface and cannot be autoclaved.
Material:	Stainless Steel+Plastics
Package:	1 pc Electronic Wrench. 16 pcs drivers

Wrench:	1
Carrying device:	1
Drivers:	14

Main menu

Products

Working Part:	Medical Grade Stainless Steel
Package:	6 pcs drivers

Instrument Weight:	100g
Power Supply:	~100-240V, 50Hz/60Hz
Power Output:	5VDC 2VA
Accuracy:	±0.5ISQ
Charger Safety Grade:	EN 60601-1-1
Capability of Battery:	900mAh

Material:	Plastic + Steel
Quantity:	5 pairs
Size:	Large (2), Medium (2), Small (2), Front Mouth (2), Side Mouth (2)
Package included	10 x dental material (all size)

Material:	Plastic
Color:	Random
Size:	Small,Middle,Large
Suitable for:	Adult,Child
Package:	12 x Plastic Teeth Holder

Model:	Dental Internal Channel Contra Angle Head FG 1.6mm
Compatible:	KAVO Low speed Contra angle
Max rotation speed:	24,000rpm
FG type burs:	1.6mm
Package:	1pc head

Model:	Dental Intraligamental Gun Syringe
Material:	Stainless steel
Package:	1 PC

Item Type:	Dental Endoscope Protective Film
Material:	Plastic
Size:	225 x 50(W-Bottom) x 20(W-Top) mm & 0.02mm Thick
Color:	Transparent
Package:	100pcs/Box

Power supply:	USB port powered, Rating DC-5V
Magnification:	30 - 50 times
LEDs:	8 white cold light LEDs
Image output:	VGA, 2M cable
Focus range:	10mm-30mm
Image Sensor:	Latest 1/4 SONY CCD Sensor and Digital Signal Processing Chips
Max. image pixels:	Display 1920*720, Maximum 4.0Mega Pixels
Focus type:	Automatic focusing
Weight:	NET220g

Intraoral camera hand-piece with memory:	1
8GB SD memory card:	1
USB SD card reader:	1
Disposal plastic sleeve for camera:	50
English manual:	1

Model:	USB intraoral camera K5
Power supply:	Computer USB port powered, Rating DC-5V
LED:	6 white cold light LED
Image output:	USB, 2M cable
Focus range:	The imaging range of the endoscope is between 5mm and 50mm, with a default value of 35mm being the clearest, which is unclear if it is too far or too close.
Image Sensor:	Latest 1/4 CMOS sensor and digital signal processing chips
Max. image pixels:	Display 1920*720P
Focus type:	Automatic focusing
Dimensions:	L/24.5cm, w/10cm, h/4cm
Capture picture:	Multimedia
Screen:	Single screen/four screen
Focusing range:	Large depth offield 5-50mm
Weight:	350g

USB intraoral camera:	1
Plastic holder for camera:	1
Free software U disk:	1
Disposal plastic sleeve for camera:	50
USB Connections(cable length 2cm):	1
English manual:	1

Name:	Intra Oral Camera
Power supply:	Computer USB port powered, rating DC-5V
Lens:	1/4 CMOS
Light:	6 white LED lights
Focus range:	10-40mm (10mm is recommended)
Focus Type:	Automatic focusing
Angle of View:	105°
Output Mode:	2.0 USB, 2 meter cable
Weight:	NET220g

Processor:	Intel 1.5GHz chip or above
Memory:	Above 4G
Hard disk:	Above 40G (1GB for software installation, 40GB for software operation)
Video card:	32M or above
Display resolution;	Resolution 1024 × 768 (15") or above, 32-bit color mode
Interface;	At least 2 available USB2.0/ USB3.0 ports. (if desktop computer used, 2 available USB ports must be had at the back of host)
Operating system;	Windows XP/Win7/Win10 (32bit&64bit)

Model:	Size1
Detector Technology:	APS CMOS
Pixel Size:	18.5μm
Theoretical Resolution:	27lp/mm
True Resolution:	CsI：≥14 lp/mm
Pixel Matrix:	1200*1600
Active Area(mm):	29.6*22.2
Mechanical Size(mm):	3928.56
Data interface:	USB
Digitization:	12/14/16 bit
Imaging Time:	3-4s
Cable Length:	2 meters

Model:	Size 2
Detector Technology:	APS CMOS
Pixel Size:	18.5μm
Theoretical Resolution:	27lp/mm
True Resolution:	CsI：≥14 lp/mm
Pixel Matrix:	1402*1888
Active Area(mm):	35*26
Mechanical Size(mm):	44.533.06
Data interface:	USB
Digitization:	12/14/16 bit
Imaging Time:	3-4s
Cable Length:	2 meters