Curing Lights

VAFU LED Curing Light Cordless 1 Sec Cure Wide Specturm Metal Body OLED Screen With Caries Detector Light Meter 3200mW/cm²

VAFU LED Curing Light Cordless 1 Second DeepCure Wide Specturm Metal Body With Caries Detector Light Meter 3200mW/Cm². Aluminum alloy body, resistance to shatter and drop. 78mm² big operation area. 4 LED light chips. 360° Rotating Head. 3 modes. 3 kinds of magnetic point curing lenses, 3 power levels, 2 lamp heads option. Caries detection light head.

Overview

Stable output power guarantees constant light so that the solidification effect is not affected by the consumption of remaining power.
Parallel light ensures more focused output energy and better solidification effect.
Wireless charging corresponding to the standards of wireless charging protocol is available.
Super capacity battery. A full charge can be used for more than 500 times continuously under 10s working of P2 mode, from full charge to low-battery alert.
Aluminum alloy body, resistance to shatter and drop.
Light source featuring 360-degre rotation to realize curing from all directions.
Replaceable light source, 400nm-420nm light source with corresponding reagent enables detection of dental caries.
A dedicated whitening roller, shooting teeth whitening gel with blue light to whiten teeth.
Charger verifying radiation output of LED curing light effective or not.
Solidified lens fixed on light source, bonded with all-ceramic veneer and adhered to crown and fiber-reinforced composite root canal post to make solidification effect better.
Replaceable Lithium battery, Auto power-off.
Watt high power blue LED light. Class: class 1
LED Curing Light is applicable to some commonly-used resin based materials in dental clinic,such as 3M, Dentsply ,dentex etc.
Equipment Safety Classification: Operation mode: Intermittent operation mode, Protection type against electric shock:class ll, power supply inside the set, Protection degree against electric shock: type B, Protection degree against inlet liquid: conventional equipment(IPXO) , Safety in the case of flammable anesthetic mixture with air, oxygen or nitrous oxide(not AP equipment or APG equipment).
Note: Do not sterilize the detachable head in autoclave. Please make sure to cover the unit with a disposable isolation sleeve before each use.

Specifications

Dimensions:	33mm x 27mm x 206mm
Net weight:	160g
Power supply:	Different power supply ；Power supply is Rechargeable battery；Rechargeable Lithium battery；Standard voltage 3.7V, capacity:2200mAh；battery model ICR 18650. with protection for overvoltage, overcurrent and short-circuits
Power Adapter:	Input: 100-240V 50/60Hz, Fuse: T1A 250V
Input power:	5VA
Output:	5V 1A
Wave length:	400nm²-480nm²
Checking:	LED light works under proper use
Radiation:	850mW/cm²
Optical effective area:	75mm

Operating Instructions

1. Press button "△"for 1 second and release the button when the buzzer warns for once. Following three modes are available

Full Power Mode: The screen shows “∏” The output light intensity is full-power. (recommended mode for clinical)
Progressive Mode: The screen shows “ɲ” The output light intensity enhances gradually power output is to maximum after 5 seconds
Pulsed Mode: The screen shows“∏∏”the blue light works in pulse manner

2. Press button "△"for 2 second and release the button when the buzzer warns for twice. Following three modes based on output of power density are available.

Ultra High Power Density: The screen shows "P1" The power density is about 3200mW/cm.
High Power Density: The screen shows "P2", The power density is about 2400mW/cm²
Standard Power Density: The screen shows "P3", The power density is about 1600mW/cm².

3. Tap button "△" to select working time interval. In"P3"mode, the time interval can be chose from 1,2,3.4,5.10,15,20 25,30, 35, 40 second In"P2"mode, the time interval can be chose from 1,2,3.4,5, 10,15,20 second In"P1"mode, the time interval can be chosefrom 1,2.3, second Information on the screen is shown in the figure.

4. During the operation, put the disposable sleeve on the top of the main unit, aim the top at the correct position, press the ON/OF F button ("O" )and the main unit will produce 'Di' sound, the curing light radiates blue light and starts working according to the set modes Meanwhile, it starts counting down from the set working time interval, it stops working when counting down to ("O" )The screen displays the set working time interval again.

5. Operation can be stopped by paras the ON/OFF button ("O").

6. After a working cycle, operator can press the ON/OFF button ("O"). to start another working cycle. Stop operating if the equipment is burning obviously, let equipment cool down before restarting. Suggest continous working cycle less than 5 times.

7. Battery Indicator: Low power detective circuit is fixed inside of the main unit.If battery indicator in the screen has only 1 bar left, please charge in time.

8. When the battery needs to be charged. plug USB Type A jack in USB Type A plug of power adapter, and connect the plug of power adapter into the AC 100V-240V power supply, and connect Micro USB of USB cable into charge indicator in charge. The blue indicator light on charger indicates charger on standby. Put the main unit to the charging point of the charger, and the indicator light turns green, main unit is detected. Meanwhile,the indicator light at the bottom of main unit turn green, the curing light starts charging. When charging finished, the indicator light at the bottom of main unit turn blue.

9. After operating, take off the disposable sleeve and throw away, avoid reusing. Power output will be, decreased by 5-10% if using the disposable sleeve.

10. The product will turn off automatically if there is And operations within 2 minutes. Turn it on by pressing any button.

11. The depth of solidification or dental resin composite is not less than 4mm per 10 second. The recommended separation distance between Iuminous point and solidifying point is 2mm.

1 Set 5 Sets 10 Sets

$278.99 $359.99

Woodpecker iLED Curing Light Wireless 360° Rotary 1 Sec Curing Purple

1 Set 5 Sets 10 Sets

$99.99

Woodpecker iLED Curing Light Wireless 360° Rotary 1 Sec Curing White

1 Set 5 Sets 10 Sets

$99.99

Woodpecker LED B Curing Light Cordless Curing Light Lamp

100% Original Woodpecker LED B Curing Light. Cordless Curing Light Lamp Cure Unit. Wide Spectrum Wave Length 385-515nm. 1700mW/cm2 Light Intensity. Ergonomics Design Contant Light Intensity. 2000mAh Rechargeable Lithium Battery. FDA Approved. One Year Warranty.

Features：

FDA Approved.
360 Degree rotary head, extend the possibility.
Ergonomics design, optimize the hand-grip use.
Low standby power consumption with seventy days' standby time.
5W high power blue light LED. The light source adopts original American LED.
Large capacity battery. A full charge can be used for more than 500 times continuously under 10s working time mode.
Contant light intensity. The solidification effect is not affected by the consumption of reminding power.
The optical fiber is autoclavable under the high temperature of 135 ℃ and the pressure of 0.22Mpa.
The depth of solidification of composite is no less than 4mm per 10 seconds.
LED B adopts the principle of ray radiation to solidify the light-sensitive resin by shooting at it in a short time.
This device is used to restore teeth and solidify material for whitening teeth.

Technical Parameter：

Battery: ICR18650, 3.6V/2000mAh
Power input: 100V to 240V~ 50Hz/60Hz
Wave length: 385nm to 515nm(Wide Spectrum)
Light intensity: 1000mW/cm2~1700mW/cm2
Illumination range: Diameter appr. 8mm
Optical fiber size: 12mm diameter, 22mm depth
Dimensions: 1.22”×1.34”×10.2” (31×34×260mm)
Net weight: 5oz (145g)
Package: 1pc/box, 12boxes/ctn

Direction to Use：

Four working time modes are available: 5, 10, 15 and 20 seconds.
Select 5 seconds: the blue light will shine at 1500 mw/cm²~1700mw/cm².
Select 10, 15 and 20 seconds: the blue light will shine at 1000mw/cm²~1200mw/cm² .

* During the operation, aim blue light at the position needing solidification. There is a "Di" sound and the LED starts working. Then it counts down to"0" to end the solidification.

Packing List：

1 * Curing light
1 * Charger
1 * Charger socket
1 * High capacitance rechargeable battery

Warranty： One year's free repair for the whole unit from the date of purchase.

1 Pc 3 Pcs 5 Pcs 10 Pcs

$69.95

Woodpecker O-Light Curing Light Cordless 1 Sec Curing 360° Rotary Head

100% Original Woodpecker O-Light Curing Light. 360 Degree Rotary Head. 1 Sec Curing 2mm Reins. 2500mW/cm2 Light Intensity. Two Working Modes. Constant Power Output. 420nm-480nm Wave Length. Ergonomics Design. 1400mAh Rechargeable Lithium Battery. FDA Approved. One Year Warranty.

Features：

FDA and CE0197 Certificated.
5W high power blue light LED.
Cure 2mm reins in one second, go quicker than ever.
360 degree rotary head, extend the possibility.
Ergonomics design, optimize the hand-grip use.
Constant light intensity: The solidification effect is not affected by the consumption of remaining power.
Large Capacity battery: A full charge can be used for more than 400 times continuously under 10s working time mode.
It's a high tech dental equipment and has a perfect quality assurance system.

Technical Parameter：

Adapter input: AC 100~240V, 50Hz/60Hz
Adapter output: DC 5V1A
Wave length: 420nm~480nm
Light intensity: 1000mW/cm2-2500mW/cm2
Illumination range: Diameter 8mm
Battery: ICR 18490, 1400mAh
Net weight: 0.6lb (259g)
Dimension: 10.6"×1"×1.25" (268.8×26.1×31.8mm)
Package: 1pc/box, 8boxes/ctn

Two Working Modes：

TURBO Mode: screen shows P1, Press the time button to select of time which could be 1 and 3 seconds. Its output light intensity is about 2300 mW/cm2-2500 mW/cm2.
NORMAL Mode: screen shows P2, Press the time button to select of time which could be 5, 10, 15 and 20 seconds. Its output light intensity is about 1000 mW/cm2-1200 mW/cm2.

Packing List：

Main unit of the LED x1
Light hood x1
Adapter x1
Bathymeter x1
Pedestal charger x1
Disposable sleeve x1
Transparent cover x5
Instruction manual x1
Qualified certificate x1

Direction To Use：

STEP 1: Switch on the LED Light Cure Unit with "Power Button".
STEP 2: Press the mode button to set the working mode, the corresponding indicator will on when a mode set.
Select the appropriate Time/Mode & start using the LED Light for curing.

Warranty：

One year's free repair for the whole unit from the date of purchase.

1 Set 3 Sets 5 Sets 10 Sets

$99.99

Woodpecker iLED Plus Curing Light Wireless 2500mW/cm2

Woodpecker Dental ILED PLUS Curing Light. Wireless 360° Rotary. 1 Second Curing 2mm Reins. 2500mW/cm2 Light Intensity. Metal Head. Upgraded Wide Spectrum (385nm-515nm). Focused Light Output. Ergonomics Fluid Design. Two Working Modes. 1400mAh Rechargeable Lithium Battery, FDA Approved. One Year Warranty.

Features:

FDA and CE0197 Certificated.
Curing 2mm resin in 1 second.
5W high power blue light LED.
Fluid design, better hand feeling.
360° Rotatable metal head, reach every angle; anti-shock, never cracks.
Upgraded Light Intensity. Two modes for option, with the maximum light intensity of 2500mw/cm2.
Upgraded Wide Spectrum. The wave band changes ofiled changes froma single blue light to blue-violet light which can cure all materials.
Upgraded Focused Light Output. Unique Woodpecker technology of focused light output reduces 55.87% light angle, allowing more concentrated energy and higher curing efficiency.
Woodpecker rechargeable lithium battery had received CB certification. The batteries refuse explosion.
Especially suitable for orthodontic brackets, porcelain verneers and post-core adhensives.

Technical Parameter:

Power input: 100V to 240V, 50Hz/60 Hz
Power output: DC5V/1A
Battery: ICR 18490, 3.7V/ 1400mAh
Wave length: 385nm-515nm
Light intensity: 1000mW/cm2~2500mW/cm2
Dimension: 1”×1”×9.5” (25×25×240mm)
Net weight: 0.6lb (278g)
Package: 1pc/box, 20boxes/ctn

Two Working Modes:

TURBO Mode: screen shows P1, Press the time button to select of time which could be 1 and 3 seconds. Its output light intensity is about 2300mW/cm2-2500 mW/cm2.
NORMAL Mode: screen shows P2, Press the time button to select of time which could be 5, 10 ,15 and 20 seconds. Its output light intensity is about 1000mW/cm2-1200 mW/cm2.

Packing List:

Main unit *1
Light hood *1
Bathymeter *1
Adapter *1
Charging base *1
Disposable sleeves *100
Instruction manual *1
Qualified certificate *1
Warranty card *1

Warranty:

One year's free repair for the whole unit from the date of purchase.

*Tips: In order to protect the device, pls remember to wear a disposable isolation sleeve before using.

1 Pc 5 Pcs 10 Pcs

$99.99

Woodpecker O-Light Plus Curing Light Cordless

Woodpecker O-Light Plus Curing Light Cordless. 360 Degree Rotary 1 Sec Curing 2mm Reins. Metal Head. Wide Spectrum. Focused Light. Up to 2500mW/cm2 Light Intensity. 8-10mm Illumination Range. Contant Powder Output Born for Teeth Restoration. Ergonomics Design. 1400mAh Rechargeable Lithium Battery. One Year Warranty.

Features

Ergonomics design, optimize the hand-grip use.
360 degree rotary head, extend the possibility.
It's a high tech dental equipment and has a perfect quality assurance system.
Cure 2mm reins in one second, go quicker than ever, which makes it especially suitable for orthodontig brackets.
Upgraded light intensity: Two modes for option, with the maximum light intensity of 2300mw/cm.
Upgraded Focused Light Output. Unique Woodpecker technology of focused light output reduces 55.87% light angle, allowing more concentrated energy andhigher curing efficiency.
Upgraded Wide Spectrum. The emission wavelength range of O-Light Plus wide spectrum curing light is 385nm-515nm. The wave band changes ofiled changes froma single blue light to blue-violet light which can cure all materials.
Large Capacity battery: A full charge can be used for more than 400 times continuously under 10s working time mode.
Woodpecker rechargeable lithium battery had received CB certification. The batteries refuse explosion.
Light Hood. Studies prove that Blue-ray will cause macular degeneration to retina and eyes. Woodpecker light hood is made of selected quality materials,
preventing eyes from Blue-ray injury.

Technical Parameter

Adapter input: AC 100~240V, 50Hz/60Hz
Battery: ICR 18490, 1400mAh
Wave length: 385nm~515nm (Wide Spectrum)
Light intensity: 1000mW/cm2-2500mW/cm2
Illumination range: Diameter 10mm
Net weight: 0.6lb (259g)
Dimension: 10.6"×1"×1.25" (268.8×26.1×31.8mm)
Package: 1pc/box, 8boxes/ctn

Two Working Modes

TURBO Mode: screen shows P1, Press the time button to select of time which could be 1s and 3s. Its output light intensity is about 2300 mW/cm2-2500 mW/cm2.
NORMAL Mode: screen shows P2, Press the time button to select of time which could be 5s,10s ,15s and 20s. Its output light intensity is about 1000 mW/cm2-1200 mW/cm2.

Packing List

Main unit of the LED x1
Light hood x1
Adapter x1
Bathymeter x1
Pedestal charger x1
Disposable sleeve x1
Transparent cover x5
Instruction manual x1
Qualified certificate x1

Direction To Use

STEP 1: Switch on the LED Light Cure Unit with "Power Button".
STEP 2: Press the mode button to set the working mode, the corresponding indicator will on when a mode set.
Select the appropriate Time/Mode & start using the LED Light for curing.

Warranty

One year's free repair for the whole unit from the date of purchase.

1 Set 5 Sets 10 Sets

$125.00

Woodpecker DTE LUX E Plus Curing Light Wireless White

1 Set 5 Sets 10 Sets

$79.00 $107.49

LED Plus Curing Light 1 Sec Cure Wide Spectrum 7 Modes 2500mW/cm²

LED Plus 105 Curing Light Lamp 1 Sec Cure Broad Spectrum 385-515nm 7 Modes 2500mW/cm². 3 Blue Light Plus 1 Purple Light High-power Chip. One Second Curing 2mm Resin. The LED Plus Model Is A 90-degree, 105-degree. 8W high power. Effective cure for most resins on the market. The magnet tail cap at the bottom of the host can be stably adsorbed on other metal surfaces.

Installation Guide

• Insert light head into the curing light hand-piece with a twisting motion，Ensure that both the direct light source head and the light curing host are fully connected to their corresponding positions
• Connect the adapter connector to the USB Type-C charging line, and then connect the power supply. The magnet tail cap at the bottom of the host can be stably adsorbed on other metal surfaces.
• After switching on the power adapter, insert the charging port or pull out the charging port, the machine will wake up automatically, and the host screen will light up
• The main panel indicator light "orange" indicates that the battery is in charge, and the light "green" indicates that the battery is full, and the machine will automatically stop charging.
• When the host is charged for one minute in an unused state, the screen will shut down automatically, and the battery will still be charged until the battery is full。
• The battery is not fully charged prior to shipment. Please charge the battery for a minimum of 4 hours prior to first use.
• To check the battery, press and hold the time switch for 4 seconds, display screen will show: a.) 4.2 – 3.7- Battery is normal b.) Lo- Battery is low
• When battery is low, curing light circuit will automatically compensate for power output or turn the light off. Always recharge the curing light when the battery is low Lo • Direct charging option from transformer for easy transportation and mobility

Note: Do not sterilize the detachable head in autoclave. Please make sure to cover the unit with a disposable isolation sleeve before each use.

Specification

Model:	Plus 105
Power Supply:	Input: AC 100-240 V, 50/60 Hz
Output:	DC 5 V/1 A
Intensity High:	2500 m w/cm²
Hand-piece Dimension:	Φ3.0 cm x 24 cm
Light Type:	LED

1 Pc 3 Pcs 5 Pcs 10 Pcs

$60.49

Woodpecker iLED Max Curing Light Cordless Upgraded Focused Light 2500mW/cm2

Woodpecker ILED MAX Curing Light. White Cure Unit. Cordless 360° Rotary. 1 Second Curing 2mm Reins. Upgraded Focused Light 2500mW/cm2. Metal Head. Upgraded Wide Spectrum (385nm-515nm). 8-10mm Illumination Range. High Light Intensity Focused Light. Ergonomics Fluid Design. Two Working Modes. 1400mAh Rechargeable Lithium Battery, FDA Approved. One Year Warranty.

Features

FDA Approved.
5W high power blue light LED.
Cure 2mm reins in one second, go quicker than ever.
360 degree rotary head, extend the possibility.
Constant power output, born for dental restoration.
Especially suitable for orthodontic brackets, porcelain verneers and post-core adhensives.
Upgraded Wide Spectrum. The wave band changes ofiled changes froma single blue light to blue-violet light which can cure all materials.
Upgraded Light Intensity. Two modes for option, with the maximum light intensity of 2500mw/cm2.
Upgraded Focused Light Output. Unique Woodpecker technology of focused light output reduces 55.87% light angle, allowing more concentrated energy andhigher curing efficiency.
Large Capacity battery: A full charge can be used for more than 400 times continuously under 10s working time mode.
Woodpecker rechargeable lithium battery had received CB certification. The batteries refuse explosion.

Technical Parameter

Power input: 100V to 240V, 50Hz/60 Hz
Power output: DC5V/1A
Battery: ICR 18490, 3.7V/ 1400mAh
Wave length: 385nm-515nm
Light intensity: 1000 -2500mW/cm2
Dimension: 1”×1”×9.5” (25×25×240mm)
Net weight: 0.6lb (278g)
Package: 1pc/box, 20boxes/ctn

Two Working Modes

HIGH Mode: screen shows P1, Press the time button to select of time which could be 1 and 3 seconds. Its output light intensity is about 2300mW/cm2-2500 mW/cm2.
NORMAL Mode: screen shows P2, Press the time button to select of time which could be 5, 10, 15 and 20 seconds.Its output light intensity is about 1000mW/cm2-1200 mW/cm2.

Packing List

Main unit *1
Light hood *1
Bathymeter *1
Adapter *1
Charging base *1
Disposable sleeves *100
Qualified certificate *1
Instruction manual *1
Warranty card *1

Warranty

One year's free repair for the whole unit from the date of purchase.

*Tips: In order to protect the device, pls remember to wear a disposable isolation sleeve before using.

1 Set 5 Sets 10 Sets

$149.99

Woodpecker iLED II Curing Light Wireless 3000mW/cm2

Woodpecker ILED II Curing Light. Black Color. Wireless 360° Rotary. 1 Second Curing 2mm Reins. Upgraded Focused Light 3000mW/cm2. Metal Head. Upgraded Wide Spectrum (385nm-515nm). 8-10mm Illumination Range. High Light Intensity Focused Light. Ergonomics Fluid Design. Three Working Modes. 2000mAh Rechargeable Lithium Battery, FDA Approved. One Year Warranty.

Features

FDA Approved.
Cure 2mm reins in one second, go quicker than ever.
360 degree rotary head, extend the possibility.
Upgraded Light Intensity. Three modes for option, with the maximum light intensity of 3000mw/cm2.
Upgraded Wide Spectrum. The wave band changes ofiled changes froma single blue light to blue-violet light which can cure all materials.
Upgraded Focused Light Output. Unique Woodpecker technology of focused light output reduces 55.87% light angle, allowing more concentrated energy andhigher curing efficiency.
Magnetic Point Cure Lens. Provides pinpoint curing of small composites and is helpful for tack curing veneers and all porcelain crown.
Large Capacity Battery: A full charge can be used for more than 400 times continuously under 10s working time mode. Woodpecker rechargeable lithium battery had received CB certification. The batteries refuse explosion.
Especially suitable for orthodontic brackets, porcelain verneers and post-core adhensives.

Technical Parameter

Power input: 100V to 240V, 50Hz/60 Hz
Power output: DC5V/1A
Battery: 18500, 3.7V/ 2000mAh
Wave length: 385nm-515nm
Light intensity: 1000 -3000mW/cm2
Illumination range: 8mm-10mm
Dimension: 1”×1”×9.5” (25×25×240mm)
Net weight: 0.6lb (278g)
Package: 1pc/box, 20boxes/ctn

Three Working Modes

Turbo Power Mode: screen shows P0, press the time button to select of time which could be 1 and 3 seconds. Its output light intensity is about 2700-3000 mW/cm2.
High Power Mode: screen shows P1, press the time button to select of time which could be 3 and 5 seconds. Its output light intensity is about 1800-2000 mW/cm2.
Standard Power Mode: screen shows P2, press the time button to select of time which could be 5, 10 ,15 and 20 seconds. Its output light intensity is about 1000-1200 mW/cm2.

Packing List

Main unit *1
Light hood *1
Bathymeter *1
Adapter *1
Charging base *1
Disposable sleeves *100
Qualified certificate *1
Instruction manual *1
Warranty card *1

Warranty

One year's free repair for the whole unit from the date of purchase.

*Tips: In order to protect the device, pls remember to wear a disposable isolation sleeve before using.

1 Sets 5 Sets 10 Sets

$190.00

Woodpecker O-Light Max Curing Light Cordless Ergonomics Focused Light Upgraded

Woodpecker O-Light Max Curing Light. Cordless. 360 Degree Rotary 1 Sec Curing 2mm Reins. 2500mW/cm2 Light Intensity. Metal Head. Focused Light. 8-10mm Illumination Range. Wide Spectrum 385nm~515nm. Two Working Modes. Ergonomics Design. 1400mAh Rechargeable Lithium Battery. FDA Approved. One Year Warranty.

Features

FDA Approved.
Cure 2mm reins in one second, go quicker than ever.
360 degree rotary head, extend the possibility.
Ergonomics design, optimize the hand-grip use.
Wide spectrum, High light intensity, Focused light.
It's a high tech dental equipment and has a perfect quality assurance system.
Constant light intensity: The solidification effect is not affected by the consumption of remaining power.
Large Capacity battery: A full charge can be used for more than 400 times continuously under 10s working time mode.
Woodpecker rechargeable lithium battery had received CB certification. The batteries refuse explosion.

Technical Parameter

Adapter input: AC 100~240V, 50Hz/60Hz
Adapter output: DC 5V1A
Battery: ICR 18490, 1400mAh
Wave length: 385nm~515nm (Wide Spectrum)
Light intensity: 1000mW/cm2-2500mW/cm2
Illumination range: Diameter 10mm
Net weight: 0.6lb (259g)
Dimension: 10.6"×1"×1.25" (268.8×26.1×31.8mm)
Package: 1pc/box, 8boxes/ctn

Two Working Modes

TURBO Mode: screen shows P1, Press the time button to select of time which could be 1s and 3s. Its output light intensity is about 2300 mW/cm2-2500 mW/cm2.
NORMAL Mode: screen shows P2, Press the time button to select of time which could be 5s,10s ,15s and 20s. Its output light intensity is about 1000 mW/cm2-1200 mW/cm2.

Packing List

Main unit of the LED x1
Light hood x1
Adapter x1
Bathymeter x1
Pedestal charger x1
Disposable sleeve x1
Transparent cover x5
Instruction manual x1
Qualified certificate x1

Direction To Use

STEP 1: Switch on the LED Light Cure Unit with "Power Button".
STEP 2: Press the mode button to set the working mode, the corresponding indicator will on when a mode set.
Select the appropriate Time/Mode & start using the LED Light for curing.

Warranty

One year's free repair for the whole unit from the date of purchase.

1 Set 3 Sets 5 Sets

$149.99

Woodpecker O-Light II Curing Light Cordless Upgraded Focused Light 3000mW/cm2

Woodpecker O-Light II Curing Light. Cordless. Upgraded Focused Light. 360 Degree Rotary 1 Sec Curing 2mm Reins. 3000mW/cm2 Light Intensity. Metal Head. Focused Light. Wide Spectrum 385nm~515nm. 8-10mm Illumination Range. Three Working Modes. Ergonomics Design. 2000mAh Rechargeable Lithium Battery. FDA Approved. One Year Warranty.

Features

FDA Approved.
Wide spectrum, High light intensity, Focused light.
Cure 2mm reins in one second, go quicker than ever.
360° Rotation, one second curing, reach every angle.
Ergonomics design, optimize the hand-grip use.
It's a high tech dental equipment and has a perfect quality assurance system.
Upgraded Light Intensity. With the maximum light intensity of 3000mw/cm2.
Large Capacity Battery: A full charge can be used for more than 400 times continuously under 10s working time mode.
It's especially suitable for orthodontic brackets, porcelain verneers and post-core adhensives.

Technical Parameter

Adapter input: AC 100~240V, 50Hz/60Hz
Adapter output: DC 5V1A
Battery: 18500, 2000mAh
Wave length: 385nm~515nm (Wide Spectrum)
Illumination range: Diameter 10mm
Light intensity: 1000mW/cm2-3000mW/cm2
Net weight: 0.6lb (259g)
Dimension: 10.6"×1"×1.25" (268.8×26.1×31.8mm)
Package: 1pc/box, 8boxes/ctn

Three Working Modes

Turbo Power Mode: Press and release “M/T” Button quickly to cycle through time options which could be 1 and 3 seconds. Its output light intensity is about 2700-3000mW/cm2.
High Power Mode: Press and release “M/T” Button quickly to cycle through time options which could be 3 and 5 seconds. Its output light intensity is about 1800-2000mW/cm2.
Standard Power Mode: Press and release “M/T” Button quickly to cycle through time options which could be 5, 10, 15 and 20 seconds. Its output light intensity is about 1000-1200mW/cm2.

Packing List

Main unit of the LED x1
Light hood x1
Adapter x1
Bathymeter x1
Pedestal charger x1
Disposable sleeve x1
Transparent cover x5
Instruction manual x1
Qualified certificate x1

Warranty

One year's free repair for the whole unit from the date of purchase.

1 Set 5 Sets 10 Sets

$200.00

Woodpecker O-Star Curing Light w/ Light Meter 7 Modes All-metal Body 3000mW/cm2

Woodpecker O-Star Curing Light w/ Light Meter 7 Modes All-metal Body Wide Spectrum 3000mW/cm2. All-metal and Compact Body. Equipped with OLED Screen. 7 Working Modes: Normal, High, Turbo, Ortho, Soft, Pulse, and Check. 360° Rotatable Head. 385-515nm Wave Length. Light Intensity up to 3000MW/cm2. Charging Base with built-in Light Meter. 10mm Active Curing Area, 8mm Active Curing Distance. Uniform Beam, Strong Penetrability. Less Light Loss. Wireless Charging. FDA Approved

Overview

Small but Powerful Making a Big Difference
Full-metal body, ergonomically-streamlined and 108g lightweight design, without fatigue from extended usage periods. Anti-shock and durable.
7 Modes to Fully Meet a Variety of Clinical Needs
It has Normal, high, turbo, ortho, soft, pulse, and check modes. Like an all star, O-Star is strong in performance, well-controlled and can fully meet various clinical needs.
Light Intensity up to 3000MW/cm²
The high light intensity brings sufficient curing depth, which can reduce the curing time and greatly improve the efficiency of resin curing.Equipped with 10w LED, bringing you full confidence in curing.
360° Rotatable Head Meets Various Clinical Needs
360° Rotatable head, easy to illuminate all angles in the mouth. The low-profile head can easily reach the posterior teeth. The patient only needs to open the mouth slightly and enjoy comfortable treatment.
Less Light Loss
The light intensity of curing lights decreases when the distance of the curing light increases. Compared to other curing lights (VALO Cordless / Bluephase PowerCure) the O-Star undergoes less light loss.
Uniform Beam, Strong Penetrability
More-focused light output thanks to the light angle of only 15.8º, ensuring good deep curing effect.
Charging Base with Built-in Light Meter
There is a light meter built in to the charging base. Accurate light intensity is required for efficient polymerisation of the resin, bringing you and your patients the best treatment experience.
Simple Two-button Design Enables Easy Operation
Equipped with OLED screen, the mode, light intensity and time can be clearly displayed to avoid clinical errors.

Direction To Use

Working mode setting
Short press the “M/T” button to select the working mode. Seven working modes can be selected: Normal, High, Turbo, Ortho, Soft, Pulse and Check. Because the curing time of different modes is different, when switching modes, the curing time will automatically follow the switching.
Curing time setting
Long press the “M/T” button to change the curing time. Different working modes have different curing times.

Warranty

One year warranty
Tips: In order to protect the device, pls remember to wear a disposable isolation sleeve before using.

Specification

Adapter input:	100-240V~ 50/60Hz 0.4A Max.
Battery:	18500, 2000mAh
Wave length:	385nm~515nm
Light intensity:	1000mW/cm2-3000mW/cm2
Active Illumination range:	8mm depth, 10mm dia.
Size of main unit:	8"x1"x1" (204 x23 x23mm)
Net Weight:	0.24lb (108g)
Package:	1pc/box, 20boxes/ctn

7 Working Modes

Modes	Light Intensity	Time Setting	Application
Normal Mode	1000mw/cm²-1200mw/cm²	5s, 10s, 15s, 20s	Suitable for most treatment scenarios, such as fillings, restorations, etc.
High Mode	1800mw/cm²-2000mw/cm²	5s, 10s, 15s, 20s	Suitable for quick curing, ensuring enough curing depth.
Turbo Mode	2700mw/cm²-3000mw/cm²	1s, 3s	Ultra-high light intensity for minimal curing time, 2mm resin in 1 second.
Ortho Mode	2700mw/cm²-3000mw/cm²	3s five burst, 3s ten burst	High light intensity with strong penetrability, especially suitable for orthodontic bracket bonding.
Soft Mode	0-1200mw/cm²	5s, 10s, 15s, 20s	Gradual increase of light intensity to effectively reduce resin shrinkage.
Pulse Mode	/	5s, 10s, 15s, 20s. The LED will stop for 0.4s at an interval of 0.6s curing.	When working in a cycle of treatment, it can effectively reduce heat generation, efficiently dissipate heat and ensure the comfort of diagnosis and treatment.
Check Mode	/	/	This mode outputs a single purple light. When special glasses are worn, the caries are obviously orange-red. Detection of caries, calculus and cracked teeth.

Packing List

Main Unit:	1
Top of main unit:	1
Light hood:	1
Bathymeter:	1
Adapter:	1
Charging base:	1
Point cure lens:	1
Disposable sleeve:	100
Qualified certificate:	1
Instruction manual :	1
Warranty card:	1

1 Pc 5 Pcs 10 Pcs

$550.00 $599.99

LED Dental Wireless Curing Light Lamp Resin Cure 1200mw/c㎡

+1

1 Pc 3 Pcs 5 Pcs 10 Pcs

$32.53

Woodpecker Curing Light iLED Plastic Head Light White

1 Pc 2 Pcs

$23.00

Woodpecker Curing Light iLED Plastic Head Light Purple

1 Pc 2 Pcs

$23.00

Woodpecker Curing Light O-Light Plastic Head Light White

1 Pc 5 Pcs 10 Pcs

$28.00 $33.49

Disposable PE Isolation Sleeves for Curing Light 1.5"x8" 100Pcs/Box

1 Box 5 Boxes 10 Boxes

$4.29

LED Dental Wireless Curing Light 3 Modes 2700mW/cm² - pairaydental.com

LED Dental Wireless Curing Light 3 Modes 2000mW/cm²

LED Dental Wireless Curing Light 3 Modes High Power 2000mW/cm². 3 different working time modes. Can solidify 4-5mm deepness in a few seconds. 360° rotatable light guide. High powerful blue light intensity. No vibration noiseless opearation. Mono-fibered class light guides for various applications.

Overview

This high power 2000mw/c㎡ LED Curing Light has a humanity intelligent chip with a high intensity
LED light and Li-on rechargeable battery.
This device can cure all the dental resin known in the market nowadays; with a performance level far
Superior than the halogen curing light's, it has 3 different working modes and it can solidify 4-5 mm
Deepness in a few seconds.
Please note that there is an isolation film at the bottom of the electromagnetic field, which needs to be removed before first use.

Benefits

Very convenient to operate.
Small size,cordless and light weighted.
No dazzling strong light which allows you to aim the light to the exact position and improve the effectiveness of the treatment.
No vibration, noiseless operation.
High power rechargeable battery.
High powerful light intensity with a maximum reach of 2000MW/cm2.
3 different working time modes, exposure time for optional curing: 8s/6s/4s.
Light guide can rotate through 360°
You can select the correct mode according to the different types of material you wish to cure,their speed of reaction,and the clinical protocol you are following.

Good Quality Materials

Mono-fiber glass light guides for various applications.
Anodized aluminum hand-piece.
Latest generation of CMS electronics.
Very high-quality single L.E.D.
Lithium ion battery with no memory effect

Design and Ergonomics

Silent and hygienic, no fan.
Round surfaces allow for easy and comfortable manipulation.
Compact, lightweight and well-balanced light guide rotates through 360°.
Base-charger can be turned in all directions and low battery warning.
Can be used anywhere in the world. The voltage input is 110 V-240 V and we will provide you with the correct adapter according to the shipping destination.

Product Details

Model:	LED Curing Light CV-213
Blue Light Intensity:	2000mw/c㎡
Spectrum Range:	420nm- 480nm
Power Adapter:	AC110-230V / 50-60Hz
Time option:	8s/6s/4s
battery:	Rechargeable Li-ion
Package:	1* LED Curing Light Device 1* High Capacity Rechargeable Battery 1* Charger 1* Charger Socket

1 Pc 5 Pcs 10 Pcs

$52.39

Woodpecker LED C Curing Light Cordless Curing Light Lamp 1200mW/cm2

1 Set 2 Sets 5 Sets

$99.99

Packing Size:	21014871 mm(unit)
Packing Weight:	420 g
Wavelength:	440-480nm
Light Intensity:	5W≥1200mw/c㎡
Input Voltage:	100-240V 50-60HZ
Battery Capacity:	DC3.7v 2200mAh
Solidification Effect:	5s/3mm

Product name:	Disposable PE Isolation Sleeves
Material:	Soft durable poly plastic
Size:	1.5"x8"
Package:	100Pcs/Box

Main menu

Curing Lights