Dental Resin Heater Heating Composite Resin Material Soften 40/45/50℃. Resin heater is designed for heating composite resin material to improve the flow of its adhesive properties. At the same time it can also be used to heat adhesive when used manual equipment, filter cover.
- Light filter
- Heating plate
- Heating main body
- Resin base
- Temperature indicator
- Temperature selection and the on / off button
- DC power
|
-
Notice:
Quick flash means heating up, when the temperature reaches 50℃, then press the key it can be cooled to 40℃;
The light slowly flashes when cooling down.
-
Cleaning and disinfection:
All the parts can be disinfectant cloth to wipe clean. Don't take any part in any liquid immersion disinfection.
Not 135℃ sterilization.
-
Technical parameters:
power adapter
Input : 100-240V AC 50/60Hz
Output : 12V 3A
|
- 1. DC Plug the power adapter into the external socket to connect the power
- 2. Green light is shining after the power supply the default temperature of 40 ℃
- 3. One key operation, three temperature precise adjustable
- 4. When the green light is standing, the temperature is 40 ℃
- 5. Once again the key shows the yellow light shining, and the representative continues to heat until the
yellow light is often bright and the temperature is
45 ℃
- 6. Once again the key shows the red light shining, and the representative
|
| continues to heat until the red light is often bright and the temperature is 50℃ |
| Temperature |
Light Color |
Heating |
Reached the preset temperature |
| 40℃ |
Green |
Shiny Green LED |
Green LED often bright |
| 45℃ |
Yellow |
Shiny Yellow LED |
Yellow LED often bright |
| 50℃ |
Red |
Shiny Red LED |
Red LED often bright |
