Dental Wireless Electric Torque Driver Implant Torque Wrench with 16pcs Drivers 10-50Ncm 360° Rotating. 360° Precision Ratchet Head, Defined Tactile Stops at Every Angle. Equipped with a smart calibration system—alerts with a buzzer and stops automatically upon reaching preset torque. Seamlessly toggle directions with a single press, ensuring effortless control and smoother clinical workflows. Applications: Implant Installation & Removal, Abutment Placement, Healing Nut Adjustment. Professional Cordless Implant Wrench. A safe, high-efficiency solution for dental surgery.
-
One-Touch Forward/Reverse Switch: Seamlessly toggle directions with a single press, ensuring effortless control and smoother clinical workflows.
-
Comprehensive Implant & Repair Solutions: Perfect for first-phase implants, second-phase restorations, and versatile backup clinical tasks.
-
Precision Torque & Auto-Stop Control: Equipped with a smart calibration system—alerts with a buzzer and stops automatically upon reaching preset torque.
- Applications: Implant Installation & Removal, Abutment Placement, Healing Nut Adjustment.
-
Sterilizable contra angle (Electronic handle can not be autoclaved)
|
- Main Unit Care:
If the tool will not be used for an extended period, recharge the battery every 15 days.
Unplug the wrench motor main unit within 2 hours after it is fully charged. Failure to do so may damage the battery.
After use, wipe the main-body housing with a soft cloth dampened with alcohol. Store it in a dry, well-ventilated area once the surface is completely dry.
Important Note: Do NOT use highly concentrated ethanol or corrosive liquids to clean the main unit.
-
Maintenance of the bender:
Apply oil to the shaft center through the screw-start insertion port daily to extend shaft service life.
Spray lubricant at the end of every workday for at least 1-2 seconds per application.
For heavy-duty-workloads: Spray lubricant once at noon and again at the end of each workday.
Spray lubricant before autoclaving.
|
| Model: |
Electric Torque Driver XLY-DNBS300
|
| Input Voltage: |
100-240V/AC 50/60Hz |
| Output Voltage: |
DC 5V/1A |
| Battery model: |
INR 14500 3.7V 800mAh |
| Standard Head: |
20:1 |
| Rotation Speed: |
10–50 r/min |
| Torque: |
5–50 N·cm |
| Net Weight: |
155g |
| Main unit: |
1 |
| 20:1 Contra Angle Handpiece Head: |
1 |
| Power Adapter: |
1 |
| Screwdrivers: |
16 |
| Certificate of Compliance: |
1 |
| Instruction manual: |
1 |
