All Products

• Low noise, standard head.
• Unique electric generator, just a little air can generate sufficient power
• For the LED bulb, continuous use of up to ten thousand hours, don't need to change the pipeline, easy to use; The world dental chair two holes, four holes.
• Warranty: one year for handle; three months for cartridge

• Nature Form Arch Wire
• Used for dental orthodontic treatment
• The natural curvature of the arch wire is closer to oral cavity space, which will save the doctor's time.

• Marks: The arch wires were offered with permanent midline marks on the preformed arch wire. And there are 3 midline marks on upper arch and 1 middle mark on lower arch.
• Surface treatment: Physical polishing.

• The single greatest advantage of the premarked arch wire is the decrease in patient chair time made possible by eliminating repeated arch wire insertions to replace lost, smeared, or drifted wax marks. Adjustment bends can be made accurately and quickly with a reduction in discomfort to the patient.

• Type: Flat Cone
• Each single box includes 5 burs of the same type.
• It is very easy to use, conveniently, and hygiene.
• The head of Diamond Burs contain a large of sand, and coverage widely.
• Rigidity, sharpness and wear.
• Excellent quality and reasonable price.

• 45° Better angle, easy access to the molar area. 
• Water cooling, no air come out from the head, avoiding the hematoma during treatment. 
• Anti slip body.

• LED Screen, high quality plastic handle.
• Noiseless and no vibration when working
• Lithium battery with large capacity
• Three Modes: Gradually mode/Flashing mode/All light mode
• Automatically power down: It will be turned automatically off automatically without pressing button for 3 minutes.
• Solidification time is :40 s. Every ten seconds, sound signal to remind operator. The length of work time can be controlled freely. 
• It has self-protection against exceeding heat after continuous long time work that power– off  by itself. After the temperature is normal, operator can use it again.
• The LED is longevity. Cold light source, no fan. Avoid the infection, cause of air movement. 

• Lightweight and comfortable to wear.
• The brackets's rhomboid shape is specifically designed to position the bracket easily and accurately.
• All brackets are color-coded by quadrant:
  Upper right-yellow
  Upper left-red
  Lower right-bule
  Lower left-black

• Thermal Active NiTi Arch Wire provides outstanding resiliency and exhibits true thermal performance. 
• Gentle forces provide for great patient comfort while delivering efficient tooth movement.
• Soft and pliable at room temperature with excellent shape memory. 
• Thermal Active NiTi wire allows for easy ligation. 
• Application: leveling and aligning in mild, moderate, and severe cases.

• Type: Flame
• It is very easy to use, conveniently, and hygiene.
• Each single box includes 5 burs of the same type.
• The head of Diamond Burs contain a large of sand, and coverage widely.
• Rigidity, sharpness and wear.
• Excellent quality and reasonable price.

• Remains constantly active, reducing the number of archwire changes.
  
• Extra smooth finish reduces friction enabling teeth to move easily along archwire.
• Higher elasticity with lower rigidity
• Unsurpassed quality at an economical price

• Fits all low speed handpieces
  
• Noise reducing technology makes angle run smoothly without vibration
  
• No heat build up
  
• Webbed latex free cups for easy flare and less spatter
  

• The ID. dot is compatible with the legendary orthos system.
• Back end narrowing design for tube, facilitate ligatured.
• Can be positioned accurately.
• Permanent tooth identifucation.
• In-Face funneled slot opening.
• Comfortable hok design.
• Large pad size.
• 80 gauge mesh base.

• Compatible with all universal disposable prophy angles
• Ergonomic design provides perfect balance
• Operate comfortable and flexible
• For teeth cleaning and polishing
  

• Compatibile with universal E-Type Motor, works on air motors.
• External coolant supply, rotation speed: MAX40,000rpm

• CAD is suitable for the efficient fabrication of full-contour restorations and is known for its versatile applications, comprehensive range of processing options and for its high strength of 635 MPa.
• Bending strength The average biaxial bending strength after being fully crystallized is 637Mpa, higher than the standard strength value, set by ISO6892:2008 For Dental Ceramics. Its superior strength can be used to make three-unit bridge in the area of molar.

• Excellent Mechanical Strength
• Easy for Milling
• High Aesthetic Effect
• Fast Crystallization Process

• Veneer
• Inlay
• Onlay
• Anterior crown
• Posterior crown
• Monolithic Bridge(≤3 Units)

Internal four way spray，effectively cools the entire surface of the bur with a high cooling effect

Head size:

Ø10*14.65mm

• Material：Stainless Steel
• Applicable to various implant system
• Helps to remove broken screws without damaging the implant
• Remove the fractured screw fast and safely
• 134°C Autoclavable

• Material: Non-toxic medical grade plastic
• Quantity: About 100 pcs/box 
• Disposable supplies, safety and health, to prevent pollution.
• Arc concave design, suitable for different interdental spaces.
• The tip is specially treated to avoid damaging the gums.
• The end with circular hole, easy to take.
• Different sizes in 4 colors for you to meet your different needs,durable for a long time use.
• With a transparent box for each size, convenient and clean to use.
• The human nature in the design, make the teeth more convenient security.
• As for tooth-filling,we provide a safer way for dentists to insert to the tooth clearance. 

• This high power 2000mw/c㎡ LED Curing Light has a humanity intelligent chip with a high intensity
• LED light and Li-on rechargeable battery.
• This device can cure all the dental resin known in the market nowadays; with a performance level far
• Superior than the halogen curing light's, it has 3 different working modes and it can solidify 4-5 mm
• Deepness in a few seconds.
• Please note that there is an isolation film at the bottom of the electromagnetic field, which needs to be removed before first use.

• Very convenient to operate.
• Small size,cordless and light weighted.
• No dazzling strong light which allows you to aim the light to the exact position and improve the effectiveness of the treatment.
• No vibration, noiseless operation.
• High power rechargeable battery.
• High powerful light intensity with a maximum reach of 2000MW/cm2.
• 3 different working time modes, exposure time for optional curing: 8s/6s/4s.
• Light guide can rotate through 360°
• You can select the correct mode according to the different types of material you wish to cure,their speed of reaction,and the clinical protocol you are following.

• Mono-fiber glass light guides for various applications.
• Anodized aluminum hand-piece.
• Latest generation of CMS electronics.
• Very high-quality single L.E.D.
• Lithium ion battery with no memory effect

• Silent and hygienic, no fan.
• Round surfaces allow for easy and comfortable manipulation.
• Compact, lightweight and well-balanced light guide rotates through 360°.
• Base-charger can be turned in all directions and low battery warning.
• Can be used anywhere in the world. The voltage input is 110 V-240 V and we will provide you with the correct adapter according to the shipping destination.

1* LED Curing Light Device

1* High Capacity Rechargeable Battery

1* Charger

1* Charger Socket

• For high speed dental handpiece
• Sharp cutting edge, high concentricity, stable and durable
• Pear-shaped type high-speed tungsten carbide burs
  

• True Ergo Design – Prism optics allow upright posture, reducing neck strain by 60%+ vs. Traditional loupes.
• Wider & Deeper FOV – Each model has a fixed high magnification (3.0x–6x) while maintaining a large, clear field of view, ideal for implants and endodontics.
• Longer Working Distance– More space for instrument maneuverability without hunching.
• Plug-and-Play Lighting – Compatible with modular LED headlights for shadow-free illumination. 5.Career-Saving Comfort – Prevents chronic cervical/lumbar damage for long-term practice sustainability. 
• Breaking the concept of tilt angle, dentists used to work with their heads down, even when wearing magnifying glasses, they still had to lower their heads down. While treating patients and helping them achieve health, these also harmed the health of doctors. For this purpose, we have specially developed this Ergo magnifying glass to reduce the pressure on the back, neck, and eyes of doctors during work, allowing them to work healthily, easily, and efficiently.
• When you take care of others, Ergo magnifying glasses help protect your bone health, making it easy and comfortable for you to work every day.
• Health tips:
  In both standing and sitting positions, the average weight of an adult's head ranges from 4.5 to 5.4 kg. When tilted, the neck load can reach 27 kg, which may lead to premature disc wear.
• It should be noted that these loupes are not intended to be focused by screwing them down, so they may not be suitable for users who are nearsighted or who have a significant vision imbalance between their two eyes.
  

• 360° Swivel for superb maneuverability. 
• 135 Degree heat disinfection.
• Ergonomic design provides perfect balance.
• Compatible with all standard disposable Prophy Angles, Plastic or Metal.
• Smooth, vibration-free operation up to 3,000 RPM.
• Prophy handpiece with Friction grip chucking, just push in or pull out the prophy head.
• Premium Plus Prophy Air Motor Handpiece is intended to be used with a disposable prophy angle and prophy paste by a trained dental  professional to perform dental prophylaxis.
  

• Vibration waves generated by the frequency generator are transmitted to the upper and lower dentition crown, and the microfrequency vibration waves are transmitted to the periodontal tissues through the teeth root.; Improve and promote the blood circulation of periodontal tissue during orthodontic treatment, ; Relax the stress of periodontal tissue due to persistent tension caused by the orthodontic treatment.

• Quickly relieve the pain and discomfort in periodontal tissue caused by bracket corrections or invisible braces.
• Relieve the pain and discomfort in periodontal tissue caused by other external forces.
• Relieve the Pain in temporomandibular joint caused by other external forces.

• When the correction process is painful and inappropriate, the device can be used to relieve the pain and discomfortin 5-10 minutes.
• Using it once (15 minutes)every night before sleeping，it can effectively speed up the teeth movement and improve the blood circulation of periodontal tissues.
• Do not bite the bracket too tightly, just grip the bracket; otherwise, it will block the vibration transmission and increase the pain of the teeth.

• One-click operation: Do not bite the bracket too tightly, just grip the bracket
• Power-on: Press the button for 3 seconds, and same way to power it off.
• Work Mode Conversion: Press the button to convert
• Charging: When the indicator flashes, it indicates that the power is insufficient. It needs to be charged immediately. The charging time is 2-3 hours. The product cannot be used when charging.
  

• This product has no therapeutic effect on teeth and periodontal diseases.
• It is forbidden to use this product during the period of inflammation of teeth and periodontal tissues.