All Products

Pac-Dent OptiFlow II Nano Flowable Composites 4-Pk 4 x 1.5 gm syringes with 20 Flo-Tips A1/A2

$31.50

Dental Photography Glass Mirror Double-Sided Intraoral Reflector Mirror

1 Pc 5 Pcs 10 Pcs

$6.40

COXO 1:1 External Dental Low Speed Handpiece Contra Angle Straight Handpiece Air Motor 4 Holes

1 Pc 3 Pcs 5 Pcs

$54.99

Dental Diamond Bur SI Series Inverted Cone Full Size 5pcs/Pack

5 Packs 10 Packs 40 Packs 100 Packs

$6.49

Archwire NiTi Super Elastic Square Round 0.012-0.020 Upper/Lower 10pcs/Pack

5 Packs 10 Packs 50 Packs 100 Packs

$5.99

20:1 Implant Contra Angle Handpiece External Spray Push Button

1 Pc 5 Pcs 10 Pcs

$52.58

VAFU LED Curing Light Cordless 1 Sec Cure Wide Specturm Metal Body OLED Screen With Caries Detector Light Meter 3200mW/cm²

VAFU LED Curing Light Cordless 1 Second DeepCure Wide Specturm Metal Body With Caries Detector Light Meter 3200mW/Cm². Aluminum alloy body, resistance to shatter and drop. 78mm² big operation area. 4 LED light chips. 360° Rotating Head. 3 modes. 3 kinds of magnetic point curing lenses, 3 power levels, 2 lamp heads option. Caries detection light head.

Overview

Stable output power guarantees constant light so that the solidification effect is not affected by the consumption of remaining power.
Parallel light ensures more focused output energy and better solidification effect.
Wireless charging corresponding to the standards of wireless charging protocol is available.
Super capacity battery. A full charge can be used for more than 500 times continuously under 10s working of P2 mode, from full charge to low-battery alert.
Aluminum alloy body, resistance to shatter and drop.
Light source featuring 360-degre rotation to realize curing from all directions.
Replaceable light source, 400nm-420nm light source with corresponding reagent enables detection of dental caries.
A dedicated whitening roller, shooting teeth whitening gel with blue light to whiten teeth.
Charger verifying radiation output of LED curing light effective or not.
Solidified lens fixed on light source, bonded with all-ceramic veneer and adhered to crown and fiber-reinforced composite root canal post to make solidification effect better.
Replaceable Lithium battery, Auto power-off.
Watt high power blue LED light. Class: class 1
LED Curing Light is applicable to some commonly-used resin based materials in dental clinic,such as 3M, Dentsply ,dentex etc.
Equipment Safety Classification: Operation mode: Intermittent operation mode, Protection type against electric shock:class ll, power supply inside the set, Protection degree against electric shock: type B, Protection degree against inlet liquid: conventional equipment(IPXO) , Safety in the case of flammable anesthetic mixture with air, oxygen or nitrous oxide(not AP equipment or APG equipment).
Note: Do not sterilize the detachable head in autoclave. Please make sure to cover the unit with a disposable isolation sleeve before each use.

Specifications

Dimensions:	33mm x 27mm x 206mm
Net weight:	160g
Power supply:	Different power supply ；Power supply is Rechargeable battery；Rechargeable Lithium battery；Standard voltage 3.7V, capacity:2200mAh；battery model ICR 18650. with protection for overvoltage, overcurrent and short-circuits
Power Adapter:	Input: 100-240V 50/60Hz, Fuse: T1A 250V
Input power:	5VA
Output:	5V 1A
Wave length:	400nm²-480nm²
Checking:	LED light works under proper use
Radiation:	850mW/cm²
Optical effective area:	75mm

Operating Instructions

1. Press button "△"for 1 second and release the button when the buzzer warns for once. Following three modes are available

Full Power Mode: The screen shows “∏” The output light intensity is full-power. (recommended mode for clinical)
Progressive Mode: The screen shows “ɲ” The output light intensity enhances gradually power output is to maximum after 5 seconds
Pulsed Mode: The screen shows“∏∏”the blue light works in pulse manner

2. Press button "△"for 2 second and release the button when the buzzer warns for twice. Following three modes based on output of power density are available.

Ultra High Power Density: The screen shows "P1" The power density is about 3200mW/cm.
High Power Density: The screen shows "P2", The power density is about 2400mW/cm²
Standard Power Density: The screen shows "P3", The power density is about 1600mW/cm².

3. Tap button "△" to select working time interval. In"P3"mode, the time interval can be chose from 1,2,3.4,5.10,15,20 25,30, 35, 40 second In"P2"mode, the time interval can be chose from 1,2,3.4,5, 10,15,20 second In"P1"mode, the time interval can be chosefrom 1,2.3, second Information on the screen is shown in the figure.

4. During the operation, put the disposable sleeve on the top of the main unit, aim the top at the correct position, press the ON/OF F button ("O" )and the main unit will produce 'Di' sound, the curing light radiates blue light and starts working according to the set modes Meanwhile, it starts counting down from the set working time interval, it stops working when counting down to ("O" )The screen displays the set working time interval again.

5. Operation can be stopped by paras the ON/OFF button ("O").

6. After a working cycle, operator can press the ON/OFF button ("O"). to start another working cycle. Stop operating if the equipment is burning obviously, let equipment cool down before restarting. Suggest continous working cycle less than 5 times.

7. Battery Indicator: Low power detective circuit is fixed inside of the main unit.If battery indicator in the screen has only 1 bar left, please charge in time.

8. When the battery needs to be charged. plug USB Type A jack in USB Type A plug of power adapter, and connect the plug of power adapter into the AC 100V-240V power supply, and connect Micro USB of USB cable into charge indicator in charge. The blue indicator light on charger indicates charger on standby. Put the main unit to the charging point of the charger, and the indicator light turns green, main unit is detected. Meanwhile,the indicator light at the bottom of main unit turn green, the curing light starts charging. When charging finished, the indicator light at the bottom of main unit turn blue.

9. After operating, take off the disposable sleeve and throw away, avoid reusing. Power output will be, decreased by 5-10% if using the disposable sleeve.

10. The product will turn off automatically if there is And operations within 2 minutes. Turn it on by pressing any button.

11. The depth of solidification or dental resin composite is not less than 4mm per 10 second. The recommended separation distance between Iuminous point and solidifying point is 2mm.

1 Set 5 Sets 10 Sets

$278.99 $359.99

LED Curing Light Cordless 1 Sec Cure Wide Spectrum Metal Body 7 Modes 3100mW/cm²

LED Curing Light Cordless 1 Sec Cure Wide Spectrum Metal Body 7 Modes 3100mW/cm². 10W high power blue light LED. Digital display screen. More-focused light output. All metal body, ergonomic streamlined design long-lasting durability. Lightweight and sturdy, resistant to drops and durable. Charging base with built-in light mete. 360° rotating lamp cap.

Overview

10W high power blue light LED.
Checking method：the LED light is fine when the light is on during operating correctly.
The wave length of this product can match with the clinical dental resin solidification, such as 3M, Dentsply etc.
Wave length：385nm-515nm.
Light intensity：1000mW/cm²-3100mW/cm².
Note: Do not sterilize the detachable head in autoclave. Please make sure to cover the unit with a disposable isolation sleeve before each use.

Operation

Press the mode button.Following Seven modes are available:
M1: Standard mode:Screen shows M1,Press the button to select of time which could be 5s,10s,15s,20s.Its output light intensity is about 1000mW/cm²-1300mW/cm².
M2: Strong light mode:Screen shows M2,Press the button to select of time which could be 3s,4s,5s.Its output light intensity is about 1800mW/cm²-2100mW/cm².
M3: Super-strong light mode:Screen shows M3,Press the button to select of time which could be 1s,2s,3s.Its output light intensity is about 2700mW/cm²-3100mW/cm².
M4: Orthodontic mode:Screen shows M4,Press the button to select of time which could be 3s /5 times, 3s /10 times.Its output light intensity is about 2700mW/cm²- 3100mW/cm².
M5: Examination mode: Screen shows M5,Press the button to select of time which could be 30s times, 60s times.Its output light intensity is about 2700mW / cm² - 3100mW /cm².
M6: Pulse mode:Screen shows M6,Press the button to select of time which could be 5s,10s,15s,20s.Its output light intensity is about 1000mW/cm²-1300mW/cm².
M7: Progressive mode:Screen shows M7,Press the button to select of time which could be 5s,10s,15s,20s.Its output light intensity is about 1000mW/cm²-1300mW/cm².

Specification

Dimension:	22.5mm×22.5mm×205mm
Net weight:	110g
Power supply:	Rechargeable Lithium battery
Battery mode:	ICR 18500
Battery voltage and capacity:	3.7V/2000mAh (Battery has protection against Over-voltage, over-current and short circuit.)
Input:	100-240V～50/60Hz 0.4A Max
Output:	5V～1A

1 Pc 5 Pcs 10 Pcs

$81.79 $89.99

Woodpecker O-Star Curing Light w/ Light Meter 7 Modes All-metal Body 3000mW/cm2

Woodpecker O-Star Curing Light w/ Light Meter 7 Modes All-metal Body Wide Spectrum 3000mW/cm2. All-metal and Compact Body. Equipped with OLED Screen. 7 Working Modes: Normal, High, Turbo, Ortho, Soft, Pulse, and Check. 360° Rotatable Head. 385-515nm Wave Length. Light Intensity up to 3000MW/cm2. Charging Base with built-in Light Meter. 10mm Active Curing Area, 8mm Active Curing Distance. Uniform Beam, Strong Penetrability. Less Light Loss. Wireless Charging. FDA Approved

Overview

Small but Powerful Making a Big Difference
Full-metal body, ergonomically-streamlined and 108g lightweight design, without fatigue from extended usage periods. Anti-shock and durable.
7 Modes to Fully Meet a Variety of Clinical Needs
It has Normal, high, turbo, ortho, soft, pulse, and check modes. Like an all star, O-Star is strong in performance, well-controlled and can fully meet various clinical needs.
Light Intensity up to 3000MW/cm²
The high light intensity brings sufficient curing depth, which can reduce the curing time and greatly improve the efficiency of resin curing.Equipped with 10w LED, bringing you full confidence in curing.
360° Rotatable Head Meets Various Clinical Needs
360° Rotatable head, easy to illuminate all angles in the mouth. The low-profile head can easily reach the posterior teeth. The patient only needs to open the mouth slightly and enjoy comfortable treatment.
Less Light Loss
The light intensity of curing lights decreases when the distance of the curing light increases. Compared to other curing lights (VALO Cordless / Bluephase PowerCure) the O-Star undergoes less light loss.
Uniform Beam, Strong Penetrability
More-focused light output thanks to the light angle of only 15.8º, ensuring good deep curing effect.
Charging Base with Built-in Light Meter
There is a light meter built in to the charging base. Accurate light intensity is required for efficient polymerisation of the resin, bringing you and your patients the best treatment experience.
Simple Two-button Design Enables Easy Operation
Equipped with OLED screen, the mode, light intensity and time can be clearly displayed to avoid clinical errors.

Direction To Use

Working mode setting
Short press the “M/T” button to select the working mode. Seven working modes can be selected: Normal, High, Turbo, Ortho, Soft, Pulse and Check. Because the curing time of different modes is different, when switching modes, the curing time will automatically follow the switching.
Curing time setting
Long press the “M/T” button to change the curing time. Different working modes have different curing times.

Warranty

One year warranty
Tips: In order to protect the device, pls remember to wear a disposable isolation sleeve before using.

Specification

Adapter input:	100-240V~ 50/60Hz 0.4A Max.
Battery:	18500, 2000mAh
Wave length:	385nm~515nm
Light intensity:	1000mW/cm2-3000mW/cm2
Active Illumination range:	8mm depth, 10mm dia.
Size of main unit:	8"x1"x1" (204 x23 x23mm)
Net Weight:	0.24lb (108g)
Package:	1pc/box, 20boxes/ctn

7 Working Modes

Modes	Light Intensity	Time Setting	Application
Normal Mode	1000mw/cm²-1200mw/cm²	5s, 10s, 15s, 20s	Suitable for most treatment scenarios, such as fillings, restorations, etc.
High Mode	1800mw/cm²-2000mw/cm²	5s, 10s, 15s, 20s	Suitable for quick curing, ensuring enough curing depth.
Turbo Mode	2700mw/cm²-3000mw/cm²	1s, 3s	Ultra-high light intensity for minimal curing time, 2mm resin in 1 second.
Ortho Mode	2700mw/cm²-3000mw/cm²	3s five burst, 3s ten burst	High light intensity with strong penetrability, especially suitable for orthodontic bracket bonding.
Soft Mode	0-1200mw/cm²	5s, 10s, 15s, 20s	Gradual increase of light intensity to effectively reduce resin shrinkage.
Pulse Mode	/	5s, 10s, 15s, 20s. The LED will stop for 0.4s at an interval of 0.6s curing.	When working in a cycle of treatment, it can effectively reduce heat generation, efficiently dissipate heat and ensure the comfort of diagnosis and treatment.
Check Mode	/	/	This mode outputs a single purple light. When special glasses are worn, the caries are obviously orange-red. Detection of caries, calculus and cracked teeth.

Packing List

Main Unit:	1
Top of main unit:	1
Light hood:	1
Bathymeter:	1
Adapter:	1
Charging base:	1
Point cure lens:	1
Disposable sleeve:	100
Qualified certificate:	1
Instruction manual :	1
Warranty card:	1

1 Pc 5 Pcs 10 Pcs

$550.00 $599.99

Dental LED Automatic Anti-fog Glass Mirror Oral Photography Reflector

From $9.20 $10.89

Dental Matrix Bands Sectional Contoured Metal Matrices Matrix #1 #2 #3 #4 50pcs/Box

1 Box 5 Boxes 10 Boxes

$14.99

COXO Dental Low Speed Electric Handpiece Contra Angle Straight Handpiece Air Motor 4 Holes - pairaydental.com

COXO Dental Low Speed Electric Handpiece 1:1 Contra Angle Straight Handpiece Air Motor 4 Holes

1 Pc 5 Pcs 10 Pcs

$59.99

COXO CX235C7 1:5 Electric Fiber Optic Contra Angle Handpiece Standard Head Inner Channel #C7-5

1 Pc 5 Pcs 10 Pcs

$234.99

Portable Dental Unit with Air Compressor Curing Light Ultrasonic Scaler 4 Holes

Portable Dental Unit with Air Compressor Curing Light Ultrasonic Scaler 4 Holes. High quality motor with steady performance, solid box to ensure anti-fall. Simple operation, fashion design. Portable box with low weight and rod boxes style to make doctors move it freely.

Note: when use the high speed handpiece, please open high and low handpiece switch to "high-speed" station, adjust the working pressure of the handpiece is between 0.18MPa-0.22MPa, the high speed handpiece standard speed is ≥300×10³ r/min. The low speed handpiece working pressure between 0.28MPa-0.32MPa, the low speed handpiece standard speed is ≥14000r/min.

Features

Portable: Portable box with low weight and rod boxes style to make doctors move it freely.
Fashion Design: Fashionable box design to make patients feel more comfortable.
Perfect Structure: Compact structure consistent with doctor's habits to make them operate more easier.
Complete Function: The unit consists of related operation system inside the dental treatment unit, such as air system, water system, suction and drainage.
Simple Operation: Using when install the parts correctly and connect with power. And the unit controlled with foot control pad.
High Durability: High quality motor with steady performance, solid box to ensure anti-fall, service time exceeds 15,000 hours.
Free Maintanance: Oil free motor without any lubricated oil, drainage bottle is more convenient to remove and disinfect.
Applications: Dental Hospital, Dental Clinics, Army and Outdoor Dental Care or Treatment Establishment.

Safety Guidelines

Before operating the unit, please read the manual carefully and preserve it for future reference.
Please operate and maintain the unit strictly in accordance with the operational instructions.
The user should read the instructions supplied with the dental unit carefully.
Symbol “Attention” denotes that before using the device, read the operating manual carefully and carry out all the instructions to avoid any damage or injury.
Please contact the local agent or the manufacturer if the unit needs repairs. We will supply a high quality of service and assistance for you.

Warning

The power switch should be turned off when the machine stopped working, the transformer and solenoid valves will heat to burn if long-term power or no stop the power.
Please drain off the water when the water on 2/3 of Suction bottle, the water will come to motor if the water is higher than 2/3 on suction bottle, the air motor will leakage of electricity or burn if the water come to air motor.

Specifications

Model:	Portable Dental Unit
Votalge:	110 V/60Hz(USA),220V/50Hz(Europe)
Power:	600W
Air Flow:	130L/min
Pressure:	0.8Mpa
Net Weight:	29Kgs
Gross Weight:	34Kgs
Noise:	40dB
Packing Size:	564276cm

Standard Accessoiries

Oiless Air Compressor Motor :	1pc
3 Way-Springe :	1pc
High Speed Handpiece Pipe:	1pc
Low Speed Handpiece Pipe:	1pc
Built in Ultrasonic Scaler (without LED):	1pc
Ultrasonic Scaler Tips:	5pcs (G12, G21, G41, P11)
Built in LED Light Curing Unit:	1pc
High Suction(Ajust).:	1pc
6L Air Tank :	1pc
Water Bottle:	1pc
Drain Bottle:	1pc
Foot Control:	1pc

$1,034.02 $1,199.00

4 Holes Dental Portable Folding Chair LED Light with Turbine Unit Blue

$391.99

Dental Diamond Bur TC Series Needle Full Size 5pcs/Pack

5 Packs 10 Packs 40 Packs 100 Packs

$6.49

Dental Assistant Stool Chair Armrest Height Adjustable 360° Rotated Black - pairaydental.com

Dental Assistant Stool Chair Armrest 18.9"-23.2" Height Adjustable 360° Rotated Black

$182.99

Dental Carbide Burs Needle Shaped Trimming Finishing FG 7901 10pcs/Box

1 Box 5 Boxes 10 Boxes

$15.29

Buccal Tube 1st Molar Bondable Monoblock Non-Convertible MBT 0.022 50Sets/Box

1 Box 5 Boxes 10 Boxes

$27.73

MARK3 APF Thixotropic Fluoride Gel Cherry/Mint/Bubble Gum/Strawberry/Grape 17oz Bottle

$11.99

Woodpecker Air Polisher Prophylaxis Powder 65um Glycine #GENTLE 4 Bottle/Unit

$59.99

Woodpecker Dental AP-H Air Polisher 4 Hole with 1 Handpiece for Supragingival Scaling

Woodpecker Dental AP-H Air Polisher 4 Hole with 1 Handpiece AP-1 Plus L for Supragingival Scaling. FDA Approved. 360° Rotatable. Three-section air-polishing handpiece design. More sientific More efficient. 0.7mm small caliber nozzle. User-friendiy design.

Overview

Comfortable clean lightweight easy cleaning mode.
With national patent design More scientific More efficient
0.7mm small-caliber nozzle More concentrated powder output More accurate scaling
1.4mm Nozzle caliber for water measures
1.4mm Smaller caliber allows for more concentrated.
Three-section air-polishing handpiece design
Detachable handpiece.
Woodpecker handpiece can be detached for maintenance if a clog occurs, which makes it unique among all the brands.
360 rotatable
Three-direction powder output One-direction water output Efficiently eliminate biofilms
Thoroughly clear dead ends.
User-friendly design
A lateral transparent powder container enables easier observation of the remaining powder.
Ergonomic design More flexible and lightweight
Easy quick connection for plugging and using The lightweight design relieves grip fatigue.
Suitable for all dental chairs The whole device weights about 125g, much lower than similar products on the market (135-165g) Easy to adjust the angle, flexible to apply to use.

Specifications

Input water pressure:	0.7bar to 2.2bar (70-220kPa)
Input air pressure:	3.5bar to 4.5bar (350-450kPa)
Working mode:	continuous operation, Intermittent operation
Weight:	About 0.150kg
Connector:	Meets the requirements of YY / T 0514

Operation Environment

Environment temperature:	＋ 10℃～ +40℃
Relative humidity:	30% ～ 75%
Atmospheric pressure:	50kPa ～ 106kPa

Packing List

Powder storage chamber (Main Unit):	1
Handpiece (AP-1 Plus L):	1
Needle (Long):	1
Needle (Short):	1
O-Ring needle:	1
Warranty card:	1
Instruction manual:	1
Tip card:	1
O-Ring Set:	2 x O-Ring (Φ4.5xΦ1) 2 x O-Ring (Φ34.5xΦ1.8) 4 x O-Ring (Φ4xΦ1)
Sealing gasket:	1
Butt joint sleeve:	1

$299.99

Dental Composite Ceramic Polishing Finishing Discs 14mm with Mandrel 40Pcs/Pack

1 Pack 5 Packs 10 Packs

$8.17

COXO CX207-G 45° Fiber Optic High Speed Air Turbine Handpiece & 6 Holes LED Quick Coupler

1 Pc 2 Pcs

🔥

$139.49

Woodpecker Ultrasonic Scaler PD1 Tips 5Pcs/Set

1 Set 5 Sets 10 Sets

$28.99

Woodpecker UDS-P Ultrasonic Scaler 6 Tips

1 Set 5 Sets 10 Sets

$159.99 $189.99

Woodpecker O-Light Curing Light Cordless 1 Sec Curing 360° Rotary Head

100% Original Woodpecker O-Light Curing Light. 360 Degree Rotary Head. 1 Sec Curing 2mm Reins. 2500mW/cm2 Light Intensity. Two Working Modes. Constant Power Output. 420nm-480nm Wave Length. Ergonomics Design. 1400mAh Rechargeable Lithium Battery. FDA Approved. One Year Warranty.

Features：

FDA and CE0197 Certificated.
5W high power blue light LED.
Cure 2mm reins in one second, go quicker than ever.
360 degree rotary head, extend the possibility.
Ergonomics design, optimize the hand-grip use.
Constant light intensity: The solidification effect is not affected by the consumption of remaining power.
Large Capacity battery: A full charge can be used for more than 400 times continuously under 10s working time mode.
It's a high tech dental equipment and has a perfect quality assurance system.

Technical Parameter：

Adapter input: AC 100~240V, 50Hz/60Hz
Adapter output: DC 5V1A
Wave length: 420nm~480nm
Light intensity: 1000mW/cm2-2500mW/cm2
Illumination range: Diameter 8mm
Battery: ICR 18490, 1400mAh
Net weight: 0.6lb (259g)
Dimension: 10.6"×1"×1.25" (268.8×26.1×31.8mm)
Package: 1pc/box, 8boxes/ctn

Two Working Modes：

TURBO Mode: screen shows P1, Press the time button to select of time which could be 1 and 3 seconds. Its output light intensity is about 2300 mW/cm2-2500 mW/cm2.
NORMAL Mode: screen shows P2, Press the time button to select of time which could be 5, 10, 15 and 20 seconds. Its output light intensity is about 1000 mW/cm2-1200 mW/cm2.

Packing List：

Main unit of the LED x1
Light hood x1
Adapter x1
Bathymeter x1
Pedestal charger x1
Disposable sleeve x1
Transparent cover x5
Instruction manual x1
Qualified certificate x1

Direction To Use：

STEP 1: Switch on the LED Light Cure Unit with "Power Button".
STEP 2: Press the mode button to set the working mode, the corresponding indicator will on when a mode set.
Select the appropriate Time/Mode & start using the LED Light for curing.

Warranty：

One year's free repair for the whole unit from the date of purchase.

1 Set 3 Sets 5 Sets 10 Sets

$99.99

Orthodontic Ligature Tie Holder Stainless Steel

1 Pc 5 Pcs 10 Pcs

$12.81

1:1 Low Speed Straight Handpiece Nose Cone External Water

1 Pc 5 Pcs 10 Pcs

$14.89

Dental Orthodontic Interproximal Enamel Reduction Automatic Strip 15-90

From $2.34

Dental Endo Blue Engine Use Rotary File 21/25mm Taper.04/.06 #15-40 6pcs/Pack

1 Pack 5 Packs 10 Packs 50 Packs

$8.99

LED Dental Wireless Curing Light Built-in Light Meter 2000mW/cm²

1 Pc 5 Pcs 10 Pcs

$66.89

Dental Carbide Bur Length Straight Fissure Crosscut FG #557 25mm 6pcs/Box - pairaydental.com

Dental Carbide Bur SL Straight Fissure Crosscut FG #557 25mm 6pcs/Box

1 Box 5 Boxes 10 Boxes

$9.79

Dental Diamond Bur FG-103 Cavity Preparation Kit 8pcs/Kit

5 Kits 10 Kits 50 Kits

$8.82

EZAim Disposable Adhesive Sensor Holder Red Bitewing Tab 100pcs/Pack

$57.99 $61.99

Dental Mobile Cabinet Cart G15 Rolling Storage Trolley Three Drawers with Socket

$356.99 $419.99

16pcs Universal Implant Drivers With Torque Wrench 15-70Ncm Kit

1 Kit 5 Kits 10 Kits

$76.07

Dental Doctor Stool With Adjustable Seat And Backrest 360-Degree Rotated Blue Color

$146.59 $179.99

1:1 Fiber Optic Contra Angle Hanpiece Internal Water Push Button

1 Pc 3 Pcs

🔥

5 Pcs

🔥

10 Pcs

🔥

$66.18

Low and High Speed Handpieces Kit 2/4 Holes E-type Air Motor

Low and High Speed Handpieces Kit 2/4 Holes. High speed handpiece is standard push button type and single-way water spray. Low speed kit is E-type connector and wrench type. Precise technology, Steady, no vibration while revolving, offering a steady operation.

Low Speed Handpieces Kits Features

E-type connector
Wrench type
Precise technology, Steady, no vibration while revolving, offering a steady operation.
Suitable for any E-type handpiece accords with ISO standard
135°C Autoclavable, suitable for both steam and chemical autoclave

Contra angle handpiece :

Low Speed 22,000-27,000 rpm.
The shank of the instrument mounted therein is 2.35 mm.
Fastening of the instruments with a turning latch.
Autoclavable 135°C
For any lab or E-type motors

Straight Nosecone:

Working pressure: 0.3MPa.
0.25MPa (Measure meter is installed at the end of air motor to measure the air pressure).
Revolution: about 22000-27000r/min (adjustable between clockwise or anticlockwise).
Noise: ≤68dB
Air consumption: about 56L/min
Ratio: 1:1
Max speed of contra angle: 25000rpm/min.

Air Mortor:

Supply air pressure: 245-392KPa (2.5-4kgf/CM2)
1:1 Direct Drive
2/4 Holes
Max speed 20,000 min-1

Low Speed Kits Specification

Air-in Pressure(kg/c㎡)	Motor Rotation(rpm	Air Wastage:(N1/min)
2.5	22,000	42
3	25,000	51
4	27,000	72

High Speed Handpiece Specification

Description:	Standard Push button type, high speed handpiece, Single-way water spray
Needle Change Type:	Push button
Air Pressure:	180~250 KPa (1.8~2.5 kgf/cm2)
Water Pressure:	198Kpa (2 kg)
Rotation Speed:	370,000-420,000 rpm
Head Hight:	13.14 mm
Head Diameter:	φ11.2 mm
Bur Applicable:	φ1.59mm~φ1.6mm×21mm~23mm (diameter×length)
Noise:	≤70dB

Packing List

High speed handpiece push button 2/4 Holes	2 each
E-type air motor 2/4 Holes	1 each
Straight nose conehandpiece	1 each
Contra Angle handpiece	1 each
Water spray nozzle	1 each
Oil spray nozzle	1 each
CAP Spanner	2

1 Set 5 Sets 10 Sets

$73.53

4:1 Contra Angle Handpiece Reduction Interproximal Stripping System

1 Set 5 Sets 10 Sets

$72.29

COXO CX207-G High Speed Air Turbine Handpiece Fiber Optic & 6 Holes LED Quick Coupler

1 Pc 5 Pcs 10 Pcs

$94.99 $109.99

Dental Universal Implant Screw Removal Kit

1 Kit 5 Kits 10 Kits

$135.48

Woodpecker Fi-E Gutta Percha Pen Needles 20G / 23G / 25G 1Pc/Pack

1 Pc 5 Pcs 10 Pcs

$59.99

Kerr TempBond Temporary Cement with Triclosan Automix Syringe 6g Clear

$75.40

COXO CX207-2 Shadowless LED High Speed Air Turbine Handpiece with Generator Torque Head 4 Holes Coupler #H75-TP4

1 Pc 5 Pcs 10 Pcs

$103.49

COXO CX207-W High Speed Air Turbine Handpiece with 4 Holes Quick Coupler

1 Pc 5 Pcs 10 Pcs

$71.49

COXO CX235C6 Dental 20:1 Contra Angle Electric Implant Handpiece Fiber Optic #C6-22

1 Pc 5 Pcs 10 Pcs

$169.99 $199.99

Woodpecker Quick Connector For Water Hose

1 Pc 5 Pcs 10 Pcs

$12.00

Dental Rubber Diamond Polisher Wheel Sizes 26x2mm/22x3mm 5 Model

1 Box 5 Boxes 10 Boxes

$12.01

Gear Ratio:	20:1 Reduction
Chuck Type:	Push Button
Model:	AZ-ER 20
Bur Applicable:	φ2.345-2.355mm
Spray:	Extemal irrigation system
Max torque:	70Ncm
For:	Compatible with all E-type motors(NSK Aseptico, W&H, Nouvag Acteon)

Material:	Metal Matrices
Package:	50pcs/Box
#1:	Suitable for Deciduous or low-crown teeth
#2:	Suitable for Bicuspids
#3:	Suitable for Molar
#4:	Suitable for Molar with extensions

Model:	CX235C7, #C7-5
Gear Ratio:	1:5 speed increase
Head:	Standard Head
Chuck Type:	Push Button
Water Spray	Inner channel
Bur Applicable:	FG Ø1.6mm
Head Size:	Ø10 x H14.8mm
Rotation Speed:	About 200,000rpm
Connector:	E-type

Portable Folding Chair:	1
Rechargeable LED light:	1
Dental Tray:	1
Waste basin and basin support:	1
Flushing system and Water supply system (connect water tap):	1

Maximum Weight Recommendation:	300 lbs
Stool Base Diameter:	25"
Floor-Seat Height:	18.9" - 23.2"
Seat Measurements:	Diameter 16"
Color:	Black

Package:	10pcs/Pack
Material:	Super Elastic NITI
Type:	Round
Arch Form:	Square

Type:	FG 7901
Size:	Φ0.8mm*4.0mm
Shank Diameter:	1.6mm
Package:	10Pcs/Box

Material:	NiTi
Length:	21mm/25mm
Speed:	250-360rpm
Torque:	2.0-3.0N.cm
Package:	6pcs/pack

Wavelength:	380-515 nm
Power Density:	99-999 mW/cm
Only for light probe with a circular emission window:	ø 8-12mm
Measuring Accuracy:	+/-20%
Adjustable Light Intensity:	800-2000 mw/cm²
Output Power:	5W
Size:	Diameter 270208118mm
Weight:	720 g
Working Voltage:	100-240V AC, 50-60HZ
Blue-ray Output Wavelength:	430-485nm
Three Gear Output Timing:	5s 10s 15s 20s 25s 30s 35s 40s
Blue-ray Illumination:	5W≥18
The Effect Of Curing Time:	6s: 2-3mm
Battery Capacity:	2200mA

Temperature :	+10℃ to +40℃
Relative Humidity:	30% to 75%
Ambient Pressure:	700hpa to 1060hpa

Main Engine of Light-curing Device: 1 set	Battery Charge Seat: 1 set
Optical Fiber: 1 piece	Shade Board: 1 piece
Battery: 1 piece	Instruction Booklet: 1 piece

Length:	25mm
Model:	FGXL 557
Shank Diameter:	1.6mm
Package:	6pcs/Box

Package:	8 Pieces Per Kit (1) 001-010M BR-45 (2) 001-016M BR-40 (3) 002-016M BC-32 (4) 234-014M EX-31 (5) 171-014M TF-20 (6) 109-010M SF-41 (7) 110-014M SF-21 (8) 010-016M SI-48.
Type:	Cavity Preparation Polishing
Model:	FG-103
Head Material:	Diamond Grit
Shank Type:	FG (Friction Grip)

Model:	G15 Mobile Cabinet with three Drawers
Voltage:	110 V/60Hz
Power:	1000W
Size:	554484CM
Cabinet top:	Gloss acrylic countertop
Cabinet:	Gloss acrylic+PVC interior drawer
Guide rail:	Three available self-priming roller drawers (imported heavy)
Handles:	fine cast steel handle
Wheel:	Including brake casters with bearing (silicone mute)
Power supply:	Rear socket Power cord 1.8m, a socket in the back of the cart
Standard configuration:	1 instrument tray

Torque Wrench:	15-70Ncm
Autoclavable:	135°C Autoclavable,the box can also be sterilized
Material:	Stainless Steel
Package:	1 pc Wrench. 16 pcs drivers

Weight:	27 lbs
Floor - Seat Height:	17.32" - 21.66"
Back:	Width 15" x Height 15"
Seat Measurements:	Width15.75" x Depth17.32"
Color:	Blue

Model:	AZ235-1C(202C8)
Brand:	AZDENT
Rotation Speed:	18,000-25,000rpm/min
Brightness:	32000Lux
Noise:	≤68dB
Chuck type:	Push button
Bur Type:	φ2.35mm
Spray:	Internal water spray
Warranty:	1 year

Hose Compatibility:	E type
Handpiece Angle:	Contra Angle
Power Source:	Electric
Handpiece Type:	Low Speed

Model:	CX207-2, #H75-TP4
High speed handpiece:	4 way spray
Head:	Torque Head
Chuck type:	Push button
Bur:	FG Ø1.59-Ø1.6mm x21-23mm
Rotation Speed:	300,000-400,000rpm
Air pressure:	0.28MPA
Head Size:	Ø12.2 X H 13.7mm
Hole:	4 hole

High speed handpiece:	3 way spray, 3 air spray
Chuck type:	push button
Noise:	≤68dB
Air pressure at the back end of HP:	0.25-0.28MPA(4 hole)
Bur spplicable:	Ø1.59-Ø1.6mmx21-23mm
Rotation speed:	≥300,000rpm

Model:	CX235C6, #C6-22
Low-speed handpiece:	20: 1 reduction
Chuck type:	Push button
Spray:	Inner channel and external
Bur applicable:	Ø2.35mm(ISO1797-1)
Max speed:	2, 000RPM
Internal cooling system:	Kirschner/ Meyer

Main menu

All Products