AZDENT

• Remains constantly active, reducing the number of archwire changes.
  
• Maximum patient comfort with fewer wire changes
• Extra smooth finish reduces friction enabling teeth to move easily along archwire.
• Higher elasticity with lower rigidity
• Unsurpassed quality at an economical price

The success of the implant treatment depends on the precise tightening of the parts placed directly on the implant. A pre-stressed tightening of the screw will help avoid any risk of screw loosening. Also, high tightening torques may lead to screw fracture. A calibrated tightening can only be guaranteed through the use of a precision instrument offering a torque control system. The dynamometric manual wrench has been specially designed to meet those requirements.

• Precision instrument equipped with a torque adjustment system for screwing prosthetic components.
• 7 torque levels (5 to 35 N.cm) and universal connection of the prosthetic mandrels
• Micro head and ergonomic handle
• Reduced amplitude of movement compared with tightening using a ratchet wrench
• Only 160g for a better freedom of movement
• Universal torque wrench, recommended with most type of implants
• 135°C Autoclavable

• Lightweight and comfortable to wear
• The brackets's rhomboid shape is specifically designed to position the bracket easily and accurately.
• All brackets are color-coded by quadrant:
  Upper right-yellow
  Upper left-red
  Lower right-bule
  Lower left-black

• English Package Archwire
• Used for dental orthodontic treatment
• The natural curvature of the arch wire is closer to oral cavity space, which will save the doctor's time.

• Marks: The arch wires were offered with permanent midline marks on the preformed arch wire. And there are 3 midline marks on upper arch and 1 middle mark on lower arch.
• Surface treatment: Physical polishing.

• The single greatest advantage of the premarked arch wire is the decrease in patient chair time made possible by eliminating repeated arch wire insertions to replace lost, smeared, or drifted wax marks. Adjustment bends can be made accurately and quickly with a reduction in discomfort to the patient.

• Ultra-high luster finish to reduce friction
  
• Superior strength, stiffness and flexibility
• Accept complex bending without breaking
• Ideal for space closure, arch expansion and trim applications
• Easy participation in early leveling and alignment, and large slot filling for torque control.
• The natural curvature of the arch wire is closer to oral cavity space, which will save the doctor's time.

• Excellent resilience, even in the case of small deformation still can provide continuous force, ensure fast and effective tooth movement. 
• The single greatest advantage of the premarked arch wire is the decrease in patient chair time made possible by eliminating repeated arch wire insertions to replace lost, smeared, or drifted wax marks. Adjustment bends can be made accurately and quickly with a reduction in discomfort to the patient.
• Used For Dental orthodontic treatment 

• Material: Ni-Ti
• Shape: Expanded
• Type: Round
• Size: Universal 0.012-0.020 
• Package: 10pcs/pack
• Attention: One pack just include one size, not mixed pack 

• The ID. dot is compatible with the legendary orthos system.
• Back end narrowing design for tube, facilitate ligatured.
• Can be positioned accurately.
• Permanent tooth identifucation.
• In-Face funneled slot opening.
• Comfortable hok design.
• Large pad size.
• 80 gauge mesh base.

• Type:  Round End Cone
• Each single box includes 5 burs of the same type.
• It is very easy to use, conveniently, and hygiene.
• The head of Diamond Burs contain a large of sand, and coverage widely.
• Rigidity, sharpness and wear.
• Excellent quality and reasonable price.

• Use For Dental Orthodontics treatment.
  
• High strength. Gentle and continuous force. Good memory.
• High elasticity and excellent rebound Medical grade polyurethane
• Latex free, safe for sensitive patients.

• Type:  Round
• It is very easy to use, conveniently, and hygiene.
• The head of Diamond Burs contain a large of sand, and coverage widely.
• Each single box includes 5 burs of the same type.
• Rigidity, sharpness and wear.
• Excellent quality and reasonable price.

• Ultra-high luster finish to reduce friction
  
• Superior strength, stiffness and flexibility
• Accept complex bending without breaking
• Ideal for space closure, arch expansion and trim applications
• Easy participation in early leveling and alignment, and large slot filling for torque control.
• The natural curvature of the arch wire is closer to oral cavity space, which will save the doctor's time.

• Ultra-high luster finish to reduce friction
  
• Superior strength, stiffness and flexibility
• Accept complex bending without breaking
• Ideal for space closure, arch expansion and trim applications
• Easy participation in early leveling and alignment, and large slot filling for torque control.
• The natural curvature of the arch wire is closer to oral cavity space, which will save the doctor's time.

• CAD is suitable for the efficient fabrication of full-contour restorations and is known for its versatile applications, comprehensive range of processing options and for its high strength of 635 MPa.
• Bending strength The average biaxial bending strength after being fully crystallized is 637Mpa, higher than the standard strength value, set by ISO6892:2008 For Dental Ceramics. Its superior strength can be used to make three-unit bridge in the area of molar.

• Excellent Mechanical Strength
• Easy for Milling
• High Aesthetic Effect
• Fast Crystallization Process

• Veneer
• Inlay
• Onlay
• Anterior crown
• Posterior crown
• Monolithic Bridge(≤3 Units)

• Nature Form Arch Wire
• Used for dental orthodontic treatment
• The natural curvature of the arch wire is closer to oral cavity space, which will save the doctor's time.

• Marks: The arch wires were offered with permanent midline marks on the preformed arch wire. And there are 3 midline marks on upper arch and 1 middle mark on lower arch.
• Surface treatment: Physical polishing.

• The single greatest advantage of the premarked arch wire is the decrease in patient chair time made possible by eliminating repeated arch wire insertions to replace lost, smeared, or drifted wax marks. Adjustment bends can be made accurately and quickly with a reduction in discomfort to the patient.

• Type: Flat Cone
• Each single box includes 5 burs of the same type.
• It is very easy to use, conveniently, and hygiene.
• The head of Diamond Burs contain a large of sand, and coverage widely.
• Rigidity, sharpness and wear.
• Excellent quality and reasonable price.

• Thermal Active NiTi Arch Wire provides outstanding resiliency and exhibits true thermal performance. 
• Gentle forces provide for great patient comfort while delivering efficient tooth movement.
• Soft and pliable at room temperature with excellent shape memory. 
• Thermal Active NiTi wire allows for easy ligation. 
• Application: leveling and aligning in mild, moderate, and severe cases.

• Remains constantly active, reducing the number of archwire changes.
  
• Extra smooth finish reduces friction enabling teeth to move easily along archwire.
• Higher elasticity with lower rigidity
• Unsurpassed quality at an economical price

• Lightweight and comfortable to wear.
• The brackets's rhomboid shape is specifically designed to position the bracket easily and accurately.
• All brackets are color-coded by quadrant:
  Upper right-yellow
  Upper left-red
  Lower right-bule
  Lower left-black

• A must have for Braces.
• Patient Relief Wax Sticks help soothe and prevent irritation to the gums caused by Braces and other Dental appliances.
• Made with medical-grade paraffin-based wax.

• The ID. dot is compatible with the legendary orthos system.
• Back end narrowing design for tube, facilitate ligatured.
• Can be positioned accurately.
• Permanent tooth identifucation.
• In-Face funneled slot opening.
• Comfortable hok design.
• Large pad size.
• 80 gauge mesh base.

• Type: Flame
• It is very easy to use, conveniently, and hygiene.
• Each single box includes 5 burs of the same type.
• The head of Diamond Burs contain a large of sand, and coverage widely.
• Rigidity, sharpness and wear.
• Excellent quality and reasonable price.

Internal four way spray，effectively cools the entire surface of the bur with a high cooling effect

Head size:

Ø10*14.65mm

• Type: Flat End Cylinder
• It is very easy to use, conveniently, and hygiene.
• The head of Diamond Burs contain a large of sand, and coverage widely.
• Each single box includes 5 burs of the same type.
• Rigidity, sharpness and wear.
• Excellent quality and reasonable price.

• Remains constantly active, reducing the number of archwire changes.
  
• Maximum patient comfort with fewer wire changes
• Extra smooth finish reduces friction enabling teeth to move easily along archwire.
• Higher elasticity with lower rigidity.

• Material：Stainless Steel
• Applicable to various implant system
• Helps to remove broken screws without damaging the implant
• Remove the fractured screw fast and safely
• 134°C Autoclavable

• Excellent resilience, even in the case of small deformation still can provide continuous force, ensure fast and effective tooth movement. 
• The single greatest advantage of the premarked arch wire is the decrease in patient chair time made possible by eliminating repeated arch wire insertions to replace lost, smeared, or drifted wax marks. Adjustment bends can be made accurately and quickly with a reduction in discomfort to the patient.
• Used For Dental orthodontic treatment 

• Material: Ni-Ti
• Shape: Expanded
• Type: Rectangular
• Size: Universal 0.016x0.016-0.020x0.020 
• Package: 10pcs/pack
• Attention: One pack just include one size, not mixed pack 

• Insert light head into the curing light hand-piece with a twisting motion，Ensure that both the direct light source head and the light curing host are fully connected to their corresponding positions
• Connect the adapter connector to the USB Type-C charging line, and then connect the power supply. The magnet tail cap at the bottom of the host can be stably adsorbed on other metal surfaces.
• After switching on the power adapter, insert the charging port or pull out the charging port, the machine will wake up automatically, and the host screen will light up
• The main panel indicator light "orange" indicates that the battery is in charge, and the light "green" indicates that the battery is full, and the machine will automatically stop charging.
• When the host is charged for one minute in an unused state, the screen will shut down automatically, and the battery will still be charged until the battery is full。
• The battery is not fully charged prior to shipment. Please charge the battery for a minimum of 4 hours prior to first use.
• To check the battery, press and hold the time switch for 4 seconds, display screen will show: a.) 4.2 – 3.7- Battery is normal b.) Lo- Battery is low
• When battery is low, curing light circuit will automatically compensate for power output or turn the light off. Always recharge the curing light when the battery is low Lo • Direct charging option from transformer for easy transportation and mobility

Note:  Do not sterilize the detachable head in autoclave. Please make sure to cover the unit with a disposable isolation sleeve before each use. 

• Type:  Needle
• Each single box includes 5 burs of the same type.
• It is very easy to use, conveniently, and hygiene.
• The head of Diamond Burs contain a large of sand, and coverage widely.
• Rigidity, sharpness and wear.
• Excellent quality and reasonable price.

• Type: Inverted Cone
• Each single box includes 5 burs of the same type.
• It is very easy to use, conveniently, and hygiene.
• The head of Diamond Burs contain a large of sand, and coverage widely.
• Rigidity, sharpness and wear.
• Excellent quality and reasonable price.

• Type:  Round End Cylinder
• Each single box includes 5 burs of the same type.
• It is very easy to use, conveniently, and hygiene.
• The head of Diamond Burs contain a large of sand, and coverage widely.
• Rigidity, sharpness and wear.
• Excellent quality and reasonable price.

• Ultra-high luster finish to reduce friction
  
• Superior strength, stiffness and flexibility
• Accept complex bending without breaking
• Ideal for space closure, arch expansion and trim applications
• Easy participation in early leveling and alignment, and large slot filling for torque control.
• The natural curvature of the arch wire is closer to oral cavity space, which will save the doctor's time.

• Thermal Active NiTi Arch Wire provides outstanding resiliency and exhibits true thermal performance. 
• Gentle forces provide for great patient comfort while delivering efficient tooth movement.
• Soft and pliable at room temperature with excellent shape memory. 
• Thermal Active NiTi wire allows for easy ligation. 
• Application: leveling and aligning in mild, moderate, and severe cases.

• Flat Lingual Retainer Wire is ideal for maxillary and mandibular bonded lingual retainers.
• Bonded to the lingual surface, this is unobtrusive, aesthetic.
• Will not fray when cut, can be bonded into place using any type of adhesive.
• Flat Lingual Retainer Wire is used to make permanent fixed lingual retainers following orthodontic treatment.
• The retainer wire features a very thin rectangular shape that can be adapted with no occlusal interference while ensuring patient comfort.
• It prevents inadvertent tooth movement associated with active force wires.
• It could be used right away in the dentist's office on the patient's teeth and there is no need for additional laboratory adjustments or precautions.
• Nothing can secure the teeth positioning after the orthodontic treatment better than the Flat Lingual Retainer Wire.

• Apply an etchant on all these teeth, wash the teeth and dry.
• Floss need to be done between all the 6 teeth.
• The wire that you have can be shaped according to the patient's mouth size；Then move floss buccally over from the backside of dental model.
• Apply composite on all these surfaces, light curing and attach the wire.
• Pull the floss from one direction buccally and take it out.
• Make sure that the patient's tongue is not being cut by any sharp surface, and there should be no high spots.

• Available for various E-type motors in accordance with ISO standard.
• Autoclavable to 135 ℃
• Sterilization can be done with High-temperature and High-pressure repeatedly.

• Uniform and non-distorting crimp
• Excellent radiopacity
• Long shelf life and freshness assured
• Suitable for vertical and lateral condensation
• Variety in the selection of sizes and packaging

• For Professional Dental Use Only
• Do not autoclave or heat sterilize in a cool place
• Contains: Guttta Percha, Zinc Oxide, Barium Sulfate, Coloring Agent.

• Permanent tooth identifucation
• In-Face funneled slot opening
• Comfortable hook design
• Back end narrowing design for tube,facilitate ligatured
• Can be positioned accurately
• The Monoblock base is designed for optimal bond stength and unmatched adhesive retention during debonding

• Friction grip 1.6mm
• Opening and preparing the pulp cavity
• Head Diameter: 1.4/1.6/1.8mm
• Working length: 10mm
• Total length: 21mm

• Alumina sandblasting gun
• Alumina sandblast guns have proven to be the most valuable tools in the dental field thanks to their effective, powerful effects and extensive application methods.
• Alumina sandblasting guns provide precise surface micro-grain treatment that can increase adhesion up to 400%.
• The surface that has just been etched is more active, so it can increase the chemical adhesion and optimize the bonding effect.
• It can be applied to all metal materials, composite materials and ceramic materials.
• After use, do not put sand powder in the product, just flush it with air and water.
• The Dental Alumina Air Abrasion Polisher is not suitable for autoclaving. If you want to disinfect, it is recommended to wipe with alcohol.

• Product use for : to increase the viscosity of the tactile surface, roughening
• High-temperature and high-strength engineering material sand tanks to ensure a firm grip structure.
• High sensitive touch switch, start and stop by the heart.
• Convenience and gas connection.
• The surface of the metal composite material, tungsten Steel, fiber post, inlay surface.

• Aluminum Oxide, 90 micron, tan Rapid removal of cements from metals.Preparation of metals for bonding. 
• Aluminum Oxide, 50 micron, white General bonding preparation of metallic and nonmetallic surfaces.(Will not discolor porcelain or composites). 
• Microprophy B, white Stain removal.Pit and fissure preparation.Sodium Bicarbonate,Flavored. 
• SA-85 Remove resin paste without enamel erosion.
• Glass Beads, 90 micron, white Satin luster texturing metal surfaces to reduce brightness. Clean dentures. Not for bonding or intraoral use.

• Type: Barrel
• Rigidity, sharpness and wear.
• Each single box includes 5 burs of the same type.
• It is very easy to use, conveniently, and hygiene.
• The head of Diamond Burs contain a large of sand, and coverage widely.
• Excellent quality and reasonable price.

• Alumina sandblasting gun
• Alumina sandblast guns have proven to be the most valuable tools in the dental field thanks to their effective, powerful effects and extensive application methods.
• Alumina sandblasting guns provide precise surface micro-grain treatment that can increase adhesion up to 400%.
• The surface that has just been etched is more active, so it can increase the chemical adhesion and optimize the bonding effect.
• It can be applied to all metal materials, composite materials and ceramic materials.
• After use, do not put sand powder in the product, just flush it with air and water.
• The Dental Alumina Air Abrasion Polisher is not suitable for autoclaving. If you want to disinfect, it is recommended to wipe with alcohol.

• Product use for : to increase the viscosity of the tactile surface, roughening
• High-temperature and high-strength engineering material sand tanks to ensure a firm grip structure.
• High sensitive touch switch, start and stop by the heart.
• Convenience and gas connection.
• The surface of the metal composite material, tungsten Steel, fiber post, inlay surface.

• Aluminum Oxide, 90 micron, tan Rapid removal of cements from metals.Preparation of metals for bonding. 
• Aluminum Oxide, 50 micron, white General bonding preparation of metallic and nonmetallic surfaces.(Will not discolor porcelain or composites). 
• Microprophy B, white Stain removal.Pit and fissure preparation.Sodium Bicarbonate,Flavored. 
• SA-85 Remove resin paste without enamel erosion.
• Glass Beads, 90 micron, white Satin luster texturing metal surfaces to reduce brightness. Clean dentures. Not for bonding or intraoral use.

• For Aluminum oxide air abrasion.
• This SandTrap is effective in preventing sand powder from flying around.
• This SandTrap can withstand high-pressure steam disinfection at temperatures up to 134 ℃, helping to prevent cross-infection.
• Package: 2pcs/Set.

• Engine Use, heat activated, can be pre-bent, has a unique memory recovery in the heat, flexibility and shape memory improve the safety.
  
• With precise processing technology, products in good flexibility, high quality cutting efficiency and fracture resistance
• Compatible with all major rotary motors in the market.
• The cutting part of these files is made of a nickel-titanium alloy.
  
• Explore the canal by using #10 stainless steel hand K files.
• Use SX to open canal, set up a straight path.
• Confirm the working length ,use S1,S2 to shape and smooth the root canal.
• According to the preparation status, to choose use F1- F3 to prepare to working length.