⚡ Bulk Savings

The success of the implant treatment depends on the precise tightening of the parts placed directly on the implant. A pre-stressed tightening of the screw will help avoid any risk of screw loosening. Also, high tightening torques may lead to screw fracture. A calibrated tightening can only be guaranteed through the use of a precision instrument offering a torque control system. The dynamometric manual wrench has been specially designed to meet those requirements.

• Precision instrument equipped with a torque adjustment system for screwing prosthetic components.
• 7 torque levels (5 to 35 N.cm) and universal connection of the prosthetic mandrels
• Micro head and ergonomic handle
• Reduced amplitude of movement compared with tightening using a ratchet wrench
• Only 160g for a better freedom of movement
• Universal torque wrench, recommended with most type of implants
• 135°C Autoclavable

• LED Screen, high quality plastic handle.
• Noiseless and no vibration when working
• Lithium battery with large capacity
• Three Modes: Gradually mode/Flashing mode/All light mode
• Automatically power down: It will be turned automatically off automatically without pressing button for 3 minutes.
• Solidification time is :40 s. Every ten seconds, sound signal to remind operator. The length of work time can be controlled freely. 
• It has self-protection against exceeding heat after continuous long time work that power– off  by itself. After the temperature is normal, operator can use it again.
• The LED is longevity. Cold light source, no fan. Avoid the infection, cause of air movement. 

• 45° Better angle, easy access to the molar area. 
• Water cooling, no air come out from the head, avoiding the hematoma during treatment. 
• Anti slip body.

• 360° Swivel for superb maneuverability. 
• 135 Degree heat disinfection.
• Ergonomic design provides perfect balance.
• Compatible with all standard disposable Prophy Angles, Plastic or Metal.
• Smooth, vibration-free operation up to 3,000 RPM.
• Prophy handpiece with Friction grip chucking, just push in or pull out the prophy head.
• Premium Plus Prophy Air Motor Handpiece is intended to be used with a disposable prophy angle and prophy paste by a trained dental  professional to perform dental prophylaxis.
  

• Vibration waves generated by the frequency generator are transmitted to the upper and lower dentition crown, and the microfrequency vibration waves are transmitted to the periodontal tissues through the teeth root.; Improve and promote the blood circulation of periodontal tissue during orthodontic treatment, ; Relax the stress of periodontal tissue due to persistent tension caused by the orthodontic treatment.

• Quickly relieve the pain and discomfort in periodontal tissue caused by bracket corrections or invisible braces.
• Relieve the pain and discomfort in periodontal tissue caused by other external forces.
• Relieve the Pain in temporomandibular joint caused by other external forces.

• When the correction process is painful and inappropriate, the device can be used to relieve the pain and discomfortin 5-10 minutes.
• Using it once (15 minutes)every night before sleeping，it can effectively speed up the teeth movement and improve the blood circulation of periodontal tissues.
• Do not bite the bracket too tightly, just grip the bracket; otherwise, it will block the vibration transmission and increase the pain of the teeth.

• One-click operation: Do not bite the bracket too tightly, just grip the bracket
• Power-on: Press the button for 3 seconds, and same way to power it off.
• Work Mode Conversion: Press the button to convert
• Charging: When the indicator flashes, it indicates that the power is insufficient. It needs to be charged immediately. The charging time is 2-3 hours. The product cannot be used when charging.
  

• This product has no therapeutic effect on teeth and periodontal diseases.
• It is forbidden to use this product during the period of inflammation of teeth and periodontal tissues.

• Insert light head into the curing light hand-piece with a twisting motion，Ensure that both the direct light source head and the light curing host are fully connected to their corresponding positions
• Connect the adapter connector to the USB Type-C charging line, and then connect the power supply. The magnet tail cap at the bottom of the host can be stably adsorbed on other metal surfaces.
• After switching on the power adapter, insert the charging port or pull out the charging port, the machine will wake up automatically, and the host screen will light up
• The main panel indicator light "orange" indicates that the battery is in charge, and the light "green" indicates that the battery is full, and the machine will automatically stop charging.
• When the host is charged for one minute in an unused state, the screen will shut down automatically, and the battery will still be charged until the battery is full。
• The battery is not fully charged prior to shipment. Please charge the battery for a minimum of 4 hours prior to first use.
• To check the battery, press and hold the time switch for 4 seconds, display screen will show: a.) 4.2 – 3.7- Battery is normal b.) Lo- Battery is low
• When battery is low, curing light circuit will automatically compensate for power output or turn the light off. Always recharge the curing light when the battery is low Lo • Direct charging option from transformer for easy transportation and mobility

Note:  Do not sterilize the detachable head in autoclave. Please make sure to cover the unit with a disposable isolation sleeve before each use. 

• Available for various E-type motors in accordance with ISO standard.
• Autoclavable to 135 ℃
• Sterilization can be done with High-temperature and High-pressure repeatedly.

• Equipped with three different sizes of work tips and it can meet multiple clinical needs.
  
• Pre-bent work tip for easier operation.
• Clamping and locking design helps you catch every broken file.
• Stainless Steel Circumcision Trocar, circumcision trocar needle and clamping needle core made of nickel-titanium alloy, anti-fatigue, and anti-fracture. 
• 134°C Autoclavable, Can be used repeatedly.

• 20:1 gear ratio
• Ergonomic comfort grip 
• Provides sufficient force at low speed
• Provide sufficient torque, meet the requirements of torque output at the dental implant system condition of 55N.cm
• Available for various E-type motors in accordance with ISO standard
• It can be keep enough torque after many time used 
• Easy to assemble and split,disinfect and sterilize compltely with a long life span,avoiding cross infection and cartridge corrosion

• Fit international brand NSK
• 6 hole led fiber coupler
• Optical fiber illumination
• 3 way water
• Standard head
• Ceramic bearing
• 135℃ autoclavable

• Transmission 1:1
• Internal water 4 spray, greatly improves the cooling performance compared with the traditional 1 point water spray design.
• QPQ surface treat process, more durable.
• Compatible with universal Fiber Optic E-Type Motor
• Works on electric or air motors