Bulk Savings Or 5% OFF Orders $50+

• Ultra-high luster finish to reduce friction
  
• Superior strength, stiffness and flexibility
• Accept complex bending without breaking
• Ideal for space closure, arch expansion and trim applications
• Easy participation in early leveling and alignment, and large slot filling for torque control.
• The natural curvature of the arch wire is closer to oral cavity space, which will save the doctor's time.

• Powerful performance. Durable.
  
• Quality Guaranteed
  

• Thermal Active NiTi Arch Wire provides outstanding resiliency and exhibits true thermal performance. 
• Gentle forces provide for great patient comfort while delivering efficient tooth movement.
• Soft and pliable at room temperature with excellent shape memory. 
• Thermal Active NiTi wire allows for easy ligation. 
• Application: leveling and aligning in mild, moderate, and severe cases.

• Can be used for holding Ligation Tie
• High quality stainless steel
• Extra Fine Beak
  
• Length: 14cm
• Quantity: 1 piece

• Flat Lingual Retainer Wire is ideal for maxillary and mandibular bonded lingual retainers.
• Bonded to the lingual surface, this is unobtrusive, aesthetic.
• Will not fray when cut, can be bonded into place using any type of adhesive.
• Flat Lingual Retainer Wire is used to make permanent fixed lingual retainers following orthodontic treatment.
• The retainer wire features a very thin rectangular shape that can be adapted with no occlusal interference while ensuring patient comfort.
• It prevents inadvertent tooth movement associated with active force wires.
• It could be used right away in the dentist's office on the patient's teeth and there is no need for additional laboratory adjustments or precautions.
• Nothing can secure the teeth positioning after the orthodontic treatment better than the Flat Lingual Retainer Wire.

• Apply an etchant on all these teeth, wash the teeth and dry.
• Floss need to be done between all the 6 teeth.
• The wire that you have can be shaped according to the patient's mouth size；Then move floss buccally over from the backside of dental model.
• Apply composite on all these surfaces, light curing and attach the wire.
• Pull the floss from one direction buccally and take it out.
• Make sure that the patient's tongue is not being cut by any sharp surface, and there should be no high spots.

• This file utilizes a unique approach in wire processing that increases cyclic fatigue resistance and improves torque strength.
• Follows the natural curvature of the tooth.

• Permanent tooth identifucation
• In-Face funneled slot opening
• Comfortable hook design
• Back end narrowing design for tube,facilitate ligatured
• Can be positioned accurately
• The Monoblock base is designed for optimal bond stength and unmatched adhesive retention during debonding

• Available for various E-type motors in accordance with ISO standard.
• Autoclavable to 135 ℃
• Sterilization can be done with High-temperature and High-pressure repeatedly.

• Stainless Steel
• Extra Fine Beak
• Length: 14cm，约5.51 in
• Can be used for holding Ligation Tie
• Quantity: 1 piece 
• High temperature resistance, corrosion resistance, can be repeated many times disinfection.
• With antiskid teeth clamp head, the head is fine, closed tightly, and held, stably without falling off.
• Non-slip handle, concave pattern, polishing treatment, effective anti-slip.
• Lock design, open and close smoothly, easy to use.
• Tail detail, selected shrapnel structure design, grip feel comfortable, easy to operate.
  

• Friction grip 1.6mm
• Opening and preparing the pulp cavity
• Head Diameter: 1.4/1.6/1.8mm
• Working length: 10mm
• Total length: 21mm

• 5th generation adhesive for all classes of direct restoration
• Post and core bonding 
• Ceramic veneer/crown/inlay and other indirect restoration bondings
• 5ml/Bottle

• High bonding strength and long lasting durability
  
• Easy infiltrate to dentin tubules.Reduce the risk of post-operative sensitivity
• Compatible with all light cure restoratives
• Time saving and easy to use

• Enamel bonding : 30 seconds etch on enamel then apply 5th generation adhesive
  
• Dentin bonding: 15 seconds etch on dentin then apply 5th generation adhesive

• For high speed dental handpiece
• Carbide rotary burrs are made of tungsten carbide, durable.
• FG (Friction Grip)
• Specially designed to cut through precious and non-precious metal

• Type: Barrel
• Rigidity, sharpness and wear.
• Each single box includes 5 burs of the same type.
• It is very easy to use, conveniently, and hygiene.
• The head of Diamond Burs contain a large of sand, and coverage widely.
• Excellent quality and reasonable price.

• During orthodontic treatment, elastics are sometimes worn to pull the teeth and adjust the jaw position. Usually, the elastic is worn by the patient as advised by the doctor and is mainly hung between the orthopedic devices (brackets, traction hooks).

Feature:

• High-quality surgical latex.
• Consistent force pull.
• Force ratings based on elastic being extended three times listed diameter.

Specification:

• Strength: 3.5oz (100g)

Size:

• Chipmunk 1/8" 3.18mm
• Rabbit 3/16" 4.76mm  
• Fox 1/4" 6.35mm  
• Penguin 5/16" 7.94mm  
• Monkey 3/8" 9.35mm

Package:

• 100pcs/bag, 50bags/box, total 5000pcs/box

• Power Chain are injection molded form optimum material , they tent to maitain theire elasticity & color over time and do not require to be frequently changed ,Long-lasting.
• High flexibility and resiliency without stiffness, making the chain easier to place and remove while providing a longer lasting tie.
• Excellent stretch and will not take a set.
• Package: In rolls,each spool contains 15 sheet of chain.
• Color: Clear
• Size: Continuous

• Engine Use, heat activated, can be pre-bent, has a unique memory recovery in the heat, flexibility and shape memory improve the safety.
  
• With precise processing technology, products in good flexibility, high quality cutting efficiency and fracture resistance
• Compatible with all major rotary motors in the market.
• The cutting part of these files is made of a nickel-titanium alloy.
  
• Explore the canal by using #10 stainless steel hand K files.
• Use SX to open canal, set up a straight path.
• Confirm the working length ,use S1,S2 to shape and smooth the root canal.
• According to the preparation status, to choose use F1- F3 to prepare to working length.

• RA (Right Angle) latch burs are used in slow speed handpieces.
• Greater control and feel when cutting enamel or dentin.
• Powerful cutting performance
• High quality tungsten carbide
• Package: 5 pcs /box

• Model: 368-023F
• Package: 10pcs/Kit
  
• Concentric, balanced bur with long lasting cutting ability 
• Maximum precision and minimum vibration
• Superior cutting efficiency and long instrument life 
• Rapid, smooth and comfortable cutting

• Type:  Round End Cone
• It is very easy to use, conveniently, and hygiene.
• Each single box includes 5 burs of the same type.
• The head of Diamond Burs contain a large of sand, and coverage widely.
• Rigidity, sharpness and wear.
• Excellent quality and reasonable price.

• MIM Bracket(Monoblock Bracket), CNC carve with solid
• New slot design, lower frication, patient is more comfortable
• Smooth rounded surfaces to ensure patient comfort.
• The bracket and base are together, one moneblock,provide maximum adhesion
• Color-coded for easy bracket identification
• Vertical scribe line ensures accurate long-axistooth placement
• Integral ball hooks for maximum strength

• Easy removal of pulp chamber roof
• Fine locating of root canal entrance
• Minimally invasive endodontic approach
• Unobstructed view suitable for microscope
• Shank Diameter: RA2.35mm for slow-speed latch-type Contra Angle
• Head Material: Carbide
• Shank Material: Stainless Steel
• Overall Length: 31mm / 34mm
• Recommended Speed: 1500rpm
• Max: 20,000rpm
• Shaft Diameter:
  For head sizes--#¼, #½ and #1, shaft diameter is 0.7mm
  For head sizes--#2, #3, and #4, shaft diameter is 1.0mm
• Package：6pcs/pack

• During orthodontic treatment, elastics are sometimes worn to pull the teeth and adjust the jaw position. Usually, the elastic is worn by the patient as advised by the doctor and is mainly hung between the orthopedic devices (brackets, traction hooks).

Feature:

• High-quality surgical latex.
• Consistent force pull.
• Force ratings based on elastic being extended three times listed diameter.

Specification:

• Strength: 6.5oz(185g)

Size:

• Chipmunk 1/8" 3.18mm
• Rabbit 3/16" 4.76mm  
• Fox 1/4" 6.35mm  
• Penguin 5/16" 7.94mm  
• Monkey 3/8" 9.35mm

Package:

• 100pcs/bag, 50bags/box, total 5000pcs/box

• During orthodontic treatment, elastics are sometimes worn to pull the teeth and adjust the jaw position. Usually, the elastic is worn by the patient as advised by the doctor and is mainly hung between the orthopedic devices (brackets, traction hooks).

Feature:

• High-quality surgical latex.
• Consistent force pull.
• Force ratings based on elastic being extended three times listed diameter.

Specification:

• Strength: 3.5/5.0/6.5 oz (100g)

Size:

• Chipmunk 1/8" 3.18mm
• Rabbit 3/16" 4.76mm  
• Fox 1/4" 6.35mm  
• Penguin 5/16" 7.94mm  
• Monkey 3/8" 9.35mm

Package:

• 100pcs/bag, 50bags/box, total 5000pcs/box

• Metal Brackets
  
• Roth/MBT Roth 022
  
• Mini 345 with Hooks 
  
• 20 pieces per pack
  

• Excellent resilience, even in the case of small deformation still can provide continuous force, ensure fast and effective tooth movement. 
• The single greatest advantage of the premarked arch wire is the decrease in patient chair time made possible by eliminating repeated arch wire insertions to replace lost, smeared, or drifted wax marks. Adjustment bends can be made accurately and quickly with a reduction in discomfort to the patient.
• Used For Dental orthodontic treatment 

• Material: Stainless Steel
• Shape: Expanded
• Type: Rectangular
• Size: Universal 0.016x0.016-0.021x0.025
• Package: 10pcs/pack
• Attention: One pack just include one size, not mixed pack 

• Smooth surface resistance to corrosion, Specially selected pure stainless steel
• High intensity and resistance to corrosion. Refined and typical polishing technique enables smooth
• The tip is inlaid with hard metal to make the pliers durable and stronger.
• Tight joints and no loose after long-term use.
• An indispensable tool in the dental clinic and orthodontic surgery.

• Forehead Rest with Ergonomic 
• Vertical Main Frame
• Metal Reinforced Horizontal Crossbar
• Light-weight, Screws Designed for Increased Durability
• Chin Cup with Ergonomic Streamlined Design, Full Range of Motion Option
• Small Light-Weight End Caps
• Multi-Adjustable Face mask
• Exclusive Patient Comfort Design

• Position bend in vertical bar over nose Center forehead rest on forehead and lock in position Center chin cup on chin and lock in position Place crossbar approximately 2.0 mm below the upper lip and  lock in position.
• Motion Option Sliding design, allows for a dynamic range of motion without side-to-side rotation.

• Equipped with three different sizes of work tips and it can meet multiple clinical needs.
  
• Pre-bent work tip for easier operation.
• Clamping and locking design helps you catch every broken file.
• Stainless Steel Circumcision Trocar, circumcision trocar needle and clamping needle core made of nickel-titanium alloy, anti-fatigue, and anti-fracture. 
• 134°C Autoclavable, Can be used repeatedly.

• Arch Wire: Super ductility and strength combination, suitable for various complicated instance.
• Advanced surface smooth process brings long fatigue life.
• With constant elasticity, the curative effect is more remarkable.
• Used for dental orthodontic treatment

• Low friction: freedom of wire in passive phase. 
  
• Clip Nickel Titanium (superelastic that does not deform during opening and closing). 
• Reading torque smoothed by the action of superelastic clip 
• Slot with rounded ends (lower binding and notching). 
• Spherical hook 
• Base with micro pins and surface treated by sandblasting. 
• Fitting a simple explorer for opening and closing the clip

• Etching gel is a polymer thickened gel for use on enamel and dentin.
• This gel will effectively treat enamel and dentin, producing the necessary microretentive surface for successful bonding. 
  
• The polymer thickener creates thixotropic properties, enhancing handling characteristics.
  
• The etchant rinse away cleanly and quickly, leaving no residue.

• Indications: Treat dentin and enamel, Treating agent on dental restorative material. Isolate tooth and then prepare the cavity in a conservative manner. clean the entire surface with a slurry of pumice and water. Apply etchant using a tip, a disposable syringe tip, or disposable brush tip. Allow etchant to remain in palce for 15 seconds. etching time should be monitored with a stopwatch. begin timing at the end of application.  
  
• Option: Place etchant enamel first, then proceed to cover dentin, for a slightly longer enamel etching time. Rinse thoroughly (at least 5 seconds) to completely remover all traces of etchant. Remove exces moisture from the tooth and proceed with the application of etching gel, waiting for 10 seconds, then rise thoroughly. then apply adhesive.
  

• The clear central axis, precise torque, angulations and slot size. makes it easier for doctors to operate, and the Standard bracket is comfortable for patients to wear.
• Removable color coded ID dot, for easy brackets selction.
• Accurate product size, ultra-high precision, and smooth surface greatly reduce oral mucosal irritation.
• Adopting advanced MIM production technology, high-quality medical stainless steel materials, fine processing, metal injection molding ,80 gauge mesh base.