Dental Handpieces & Curing Lights

LED Fiber Optic High Speed Handpiece Three Water Spray Standard Head Push Button 4/6 Holes Quick Coupler

1 Pc 5 Pcs 10 Pcs

$46.60

2 Hole Low Speed Handpiece & Air Motor Set External Water Spray

1 Set 5 Sets 10 Sets

$49.81

Low and High Speed Handpieces Kit 2/4 Holes E-type Air Motor

Low and High Speed Handpieces Kit 2/4 Holes. High speed handpiece is standard push button type and single-way water spray. Low speed kit is E-type connector and wrench type. Precise technology, Steady, no vibration while revolving, offering a steady operation.

Low Speed Handpieces Kits Features

E-type connector
Wrench type
Precise technology, Steady, no vibration while revolving, offering a steady operation.
Suitable for any E-type handpiece accords with ISO standard
135°C Autoclavable, suitable for both steam and chemical autoclave

Contra angle handpiece :

Low Speed 22,000-27,000 rpm.
The shank of the instrument mounted therein is 2.35 mm.
Fastening of the instruments with a turning latch.
Autoclavable 135°C
For any lab or E-type motors

Straight Nosecone:

Working pressure: 0.3MPa.
0.25MPa (Measure meter is installed at the end of air motor to measure the air pressure).
Revolution: about 22000-27000r/min (adjustable between clockwise or anticlockwise).
Noise: ≤68dB
Air consumption: about 56L/min
Ratio: 1:1
Max speed of contra angle: 25000rpm/min.

Air Mortor:

Supply air pressure: 245-392KPa (2.5-4kgf/CM2)
1:1 Direct Drive
2/4 Holes
Max speed 20,000 min-1

Low Speed Kits Specification

Air-in Pressure(kg/c㎡)	Motor Rotation(rpm	Air Wastage:(N1/min)
2.5	22,000	42
3	25,000	51
4	27,000	72

High Speed Handpiece Specification

Description:	Standard Push button type, high speed handpiece, Single-way water spray
Needle Change Type:	Push button
Air Pressure:	180~250 KPa (1.8~2.5 kgf/cm2)
Water Pressure:	198Kpa (2 kg)
Rotation Speed:	370,000-420,000 rpm
Head Hight:	13.14 mm
Head Diameter:	φ11.2 mm
Bur Applicable:	φ1.59mm~φ1.6mm×21mm~23mm (diameter×length)
Noise:	≤70dB

Packing List

High speed handpiece push button 2/4 Holes	2 each
E-type air motor 2/4 Holes	1 each
Straight nose conehandpiece	1 each
Contra Angle handpiece	1 each
Water spray nozzle	1 each
Oil spray nozzle	1 each
CAP Spanner	2

1 Set 5 Sets 10 Sets

$73.53

LED High Speed Handpiece 2/4 Hole Ceramic Bearing Single Water Spray

1 Pc 5 Pcs 10 Pcs

$39.73

4 Hole LED High Speed Handpiece Triple Water Spray Push Button

1 Pc 5 Pcs 10 Pcs

$25.02

LED High Speed Handpiece Quick Coupler 4 Hole Four Water Spray

1 Pc 5 Pcs 10 Pcs

$59.89

LED High Speed Handpiece 2/4 Hole Torque Head Push Button E-generator Triple Water Spray Ceramic Bearings

1 Pc 5 Pcs 10 Pcs

$47.17

Cordless Endo Motor Handpiece LED Reciprocation Function 360° Rotatable 10 Working Procedure

Cordless Endo Motor Handpiece with Reciprocation Function, LED Light, 360° Rotatable, 10 Working Procedure. 16:1 standard configuration contra angle. High-quality imported motor, high torque, high speed and stable output. Small head and easy to operate. Ergonomic design easy to carry.

Overview

LED light clarity and stability
16:1 standard configuration contra angle
Can switch 10 kinds of working procedure
RPM：120-600 Torque(N.cm)：0.6-4
Stands up to the test It's worth getting your hands on
High-quality imported motor, high torque, high speed and stable output
Small head and easy to operate
Ergonomic design easy to carry
Built-in high-capacity lithium battery, so it can reduce battery change times and reduce costs for machine

10 kinds of working procedure

P1
Positive 360°automatic movement,forward rotation plus reversal torque,then remove the torque to restore forward.
P2
Reverse reciprocating motion system,reverse 150°,forward 30°(approximation)
P3
Reverse 360°automatic movement,reverse rotation plus torque forward,then remove the torque to restore the reversal
P4
Forward reciprocating motion system,forward 150°,reverse 30°(approximation)
P5
Positive 360°,when encounter torque,please stop.Using hand file to reciprocate Contra-angle Handpiece or Anti edge file to remove broken needle.
P6
Reverse 360°,when encounter torque,please stop.Using cutting edge file to remove broken needle.
P7
Forward 360°automatic movement,forward reaches torque reverse ,stop after
removing torque.
P8
Reverse 360°automatic movement,forward reaches torque reverse ,stop after
removing torque.
P9
Continuous forward mode,no torque judgement
P10
Continuous reverse mode,no torque judgement

Specifications

Main engine voltage:	3.7Vdc
Battery capacity:	800mAh
Charger input voltage:	AC110-220V,60/60Hz
Charger output voltage:	5Vdc
Input voltage:	1A

Packing List

The host:	1
Charging Dock:	1
Lamp holder:	2
Power adapter:	1
Motor cover:	1
Product specification:	1

$76.84

Dental Shadowless LED E-generator High and Low Speed Handpiece Kit 2/4 Holes

1 Set 2 Sets

🔥

$103.63

20:1 Implant Reduction Contra Angle Handpiece Push Button External Spray

1 Pc 3 Pcs

🔥

5 Pcs

🔥

10 Pcs

🔥

$41.49

1:1 Low Speed Contra Angle Handpiece Push Button External Water

1 Pc 5 Pcs 10 Pcs

$18.73

LED Fiber Optic High Speed Handpiece Standard Head Three Water Spray Push Button & 6 Holes Quick Coupler

1 Pc 3 Pcs

🔥

5 Pcs

🔥

10 Pcs

🔥

$45.01

4:1-O 17° Left & Right Reciprocating Saw Straight Handpiece Water Spray

1 Pc 5 Pcs 10 Pcs

$157.25

4:1-S 3° Back & Forth Reciprocating Saw Straight Handpiece Water Spray

1 Pc 5 Pcs 10 Pcs

$157.25

1:1 Fiber Optic Low Speed Straight Surgical Handpiece External Pipe - pairaydental.com

1:1 Fiber Optic Low Speed Straight Handpiece External Pipe

1 Pc 5 Pcs 10 Pcs

$77.69

1:1 Low Speed 20 Degree Contra Angle Handpiece Single External Water Spray

1 Pc 5 Pcs 10 Pcs

$44.13

3.2:1-R 1.8mm Up & Down Reciprocating Saw Straight Handpiece Water Spray - pairaydental.com

3.2:1-R Up & Down Reciprocating Saw Straight Handpiece Water Spray

1 Pc 5 Pcs 10 Pcs

$157.25

1:1 Fiber Optic Contra Angle Hanpiece Internal Water Push Button

1 Pc 3 Pcs

🔥

5 Pcs

🔥

10 Pcs

🔥

$66.18

1:1 Low Speed Straight Handpiece Nose Cone External Water

1 Pc 5 Pcs 10 Pcs

$14.89

1:1 Low Speed Handpiece Air Motor External Water 2/4 Hole

1 Pc 5 Pcs 10 Pcs

$18.39

1:1 Low Speed Handpieces Air Motor Internal Water 4 Holes

1 Pc 5 Pcs 10 Pcs

$49.81

1:1 Fiber Optic Straight Nose Cone Handpiece Internal Water

1 Pc 5 Pcs 10 Pcs

$75.93

1:1 Low Speed Handpiece Air Motor Internal Water 4 Hole

1 Pc 5 Pcs 10 Pcs

$26.09

1:1 Low Speed Contra Angle Handpiece Internal Water Push Button

1 Pc 5 Pcs 10 Pcs

$47.28

1:1 Low Speed Contra Angle Handpiece Push Button External Water

1 Pc 5 Pcs 10 Pcs

$21.82

20:1 Reduction Implant Latch Contra Angle Handpiece Water Spray

1 Pc 5 Pcs 10 Pcs

$41.49

20:1 Implant Contra Angle Handpiece LED Fiber Optic Push Button

1 Pc 5 Pcs 10 Pcs

$112.89

Dental LED High Speed Handpiece 2/4 Hole Four Water Spray Push Button

1 Pc 5 Pcs 10 Pcs

$30.93

4 Hole High Speed Handpiece Push Button Four Water Spray Clean Head System

1 Pc 5 Pcs 10 Pcs

$38.97

2/4 Hole LED High Speed Handpiece 45 Degree Standard Head Push Button E-Generator

1 Pc 5 Pcs 10 Pcs

$34.57

Mini Cordless Endo Motor Handpiece Reciprocation Function 16:1 Contra Angle 9 Programs

$153.45

Mini Cordless LED Endo Motor Handpiece 16:1 Reduction Contra Angle 6 Memory Set

Mini Cordless LED Endo Motor Handpiece 16:1 Reduction Contra Angle 6 Memory, 6 Kinds of Procedures(Memory set) For Selection, With High Brightness LED Lamp.

Overview

When operating, using mini push button 16:1(left and right reciprocating) dental contra-angle handpiece to coordinate the machine files(hand files).
There are 6 kinds of procedures(Memory set) for selection. It can input the optimum data in advance, and also can modify it according to the working conditions in use.
Soft start and soft stop can be achieved and the operation is more comfortable. Simultaneously, it will not break the needle when root canal files encounter instantaneous shock.
Dental contra-angle Handpiece and lamp holder can withstand 135°C high temperature and high pressure sterilization.
Built-in high-capacity lithium battery, so it can reduce battery change times and reduce costs for machine.
With LED lamp and high brightness, it can help doctors get a better look at the root canal environment.

Ratio

RPM

Torque(N.cm)

16:1

150-500

0.6 – 4.0

Six Kinds Work Procedures

P1:	Positive 360°automatic movement,forward rotation plus reversal torque,then remove the torque to restore forward.
P2:	Reverse reciprocating motion system,reverse 150°,forward 30°(approximation)
P3:	Reverse 360°automatic movement,reverse rotation plus torque forward,then remove the torque to restore the reversal
P4:	Forward reciprocating motion system,forward 150°,reverse 30°(approximation)
P5:	Positive 360°,when encounter torque,please stop.Using hand file to reciprocate Contra-angle Handpiece or Anti edge file to remove broken needle.
P6:	Reverse 360°,when encounter torque,please stop.Using cutting edge file to remove broken needle.

Specifications

Main Engine Voltage:	3.7Vdc
Battery Capacity:	800mAh
Charger Input Voltage:	AC110-220V,60/60Hz
Charger Output Voltage:	5Vdc
Intput Current:	1A

Packing List

The Host :	1
Charging Dock:	1
Lamp Holder :	2
Power Adapter :	1
Motor Cover :	1
Product Specification:	1
Product Certificate:	1

$88.35 $112.20

LED Wireless Endodontic Motor Handpiece With 16:1 Contra Angle 9 Modes

$85.38

Dental Electric Micromotor Polishing Grinding Machine 65W 40000rpm

$77.99 $95.99

Dental N3 Micromotor + Handpiece 35K Rpm

$63.63 $73.99

Dental N3 Micromotor + Standard E-Type 35K Rpm

$57.12 $65.51

Dental E Type Micromotor Handpiece 35000RPM

$24.32

Dental Micromotor Handpiece 35000RPM

$29.07

1:1 Low Speed Contra Angle & Straight Handpiece & 4 Holes Internal Water Spray Air Motor Set

1 Set 5 Sets 10 Sets

$144.50

20:1 Implant Contra Angle Handpiece External Spray Push Button

1 Pc 5 Pcs 10 Pcs

$52.58

4 Hole Low Speed Handpiece & Air Motor Set External Water Spray

1 Set 5 Sets 10 Sets

$49.81

4 Hole LED High Speed Handpiece Torque Head Push Button Triple Water Spray

1 Pc 3 Pcs 5 Pcs 10 Pcs

$59.99

4 Holes Dental Shadowless LED E-generator High and Low Speed Handpiece Kit

1 Set 3 Sets 5 Sets

$103.63

Dental Electric Micro Motor Micromotor N3

$41.19

16pcs Universal Implant Drivers With Torque Wrench 15-70Ncm Kit

1 Kit 5 Kits 10 Kits

$76.07

16pcs Electric Wireless Universal Implant Torque Wrench Drivers 10-50Ncm Kit

1 Kit 5 Kits 10 Kits

$137.19 $185.29

Woodpecker E-COM Plus Cordless Endo Motor Handpiece

Woodpecker E-COM Plus, E-COM+ Cordless Endo Motor Handpiece, Premium Latest Model, Effectively Prevent Needle Breakage, OLED-Screen, Maximum Compatibility, 9 User-defined Modes with Reciprocating Mode, Endodontic Root Canal Molding and Cleaning in Treatment, One Year Warranty.

The product does not come with WaveOne system. Our engineers recommend adjusting the torque and speed yourself. Additionally, the set parameters can be saved, eliminating the need to re-set them again.Settings: Speed 350, Torque 4.0, Forward 30°, Reverse 130°

Overview:

E-COM + is mainly used in EndodoAdopt real-time feedback technology & dynamic torque control,realizing automatic reverse,effectively preventing fracture.
E-COM + can be connected to the matched Apex locator to add an apex locator function. By connecting the E-COM + to the matched Apex locator, the position of the file tip inside the canal can be monitored during the procedure and many automatic functions such as Auto Apical Reverse can be activated.

Features:

Effectively Prevent Needle Breakage

Adopt real-time feedback technology & dynamic torque control,realizing automatic reverse,effectively preventing fracture.

Preset Various File Systems

Preset various file systems so that the dentist can directly choose the file system that they need,which brings dentists convenience while they need to use different kinds of files.

Maximum Compatibility

Wide torque & speed range make it adapt to various file systems such as FKG,XP-endo,and Shaper in the market.
Recommended speed is 800-1000rpm.

Cordless Handpiece

Flexible use & easy storage without tail cord Human friendly design brings better holding feeling.

All-angle OLED Screen

Without visual angle limit,clear display can be guaranteed even under strong light.
Available display of speed,torque, and Battery Consumption

Customization 9 user-defined modes

Storage of 9 user-defined modes allows invocation at any time.
Under each mode,continuous motion,reciprocating motion,and reverse motion are for options.
Torque and speed is adjustable.

Imported Motor 15.5:1

Reduction ratio endows strong power and efficient cutting.
Durable planet gear gearbox prolongs service life of device

Nimble & Autoclavable Contra-angle

Contra-angle can be autoclaved to avoid cross-infection.Adjustable angle make it available for different teeth positions small & exquisite head provides unobstructed views.

Automatic Torque Calibrating

Choose Torque Calibrating mode to automatically calibrate torque,reducing the torque fluctuation caused by contra-angle replacement or sterilization under high temperature and high pressure

Technical Parameter:

Battery: Lithium battery in handpiece, 3.6V /750mAh
Power input: ~100V-240V, 50Hz/60Hz, 0.4A(Max)
Power output: DC5V/1A
Torque: 0.6Ncm-5.0Ncm(6mNm ~ 50mNm)
Rotate speed: 100rpm~1000rpm

Environment Parameters:

Environment temperature: +5℃ ~ +40℃
Relative humidity: 30% ~ 75%
Atmospheric pressure: 70kPa ~ 106kPa

Packing List:

Charging base *1
Motor handpiece *1
Contra-angle *1
Lubricator *1
Adapter *1
Disposable insulation sleeves *1
Qualified certificate *1
Instruction manual *1
Warranty card *1

The Contra Angle Instructions:

The contra-angle adopts precision gear transmission, and the transmission ratio is 1: 1.

Before the first use and after treatments, please clean and disinfect contra-angle with disinfectant of neutral PH value.
After disinfection, lubricate it with specific cleaning oil.
Finally, sterilize it under high temperature and high pressure (134℃, 0.2MPa~0.23MPa).

Warranty:

One year's free repair for the whole unit from the date of purchase. Lifetime maintenance.

*Please Notice:

The contra-angle can only be used cooperatively with this device. Otherwise the contra-angle will be damaged.

1 Set 5 Sets

$389.99 $399.99

Woodpecker EndoMatic Cordless Endo Motor Built-in Apex Locator

Woodpecker EndoMatic Cordless Endo Motor Built-in Apex Locator, 2 in1 Endo System Insulated Plastic Contra-angle without Using Silicone Sleeves. 300° Rotatable Contra-angle. Length Determination. Auto Start and Stop & Auto Reverse and Stop & Auto Apical Slow-down. All-Angle OLED Screen. Built-in 20+ file systems. Wireless Charging. Endodontic Root Canal Measurement and Treatment. One Year Warranty.

Features:

300 Degrees Rotation of Contra Angle

The contra angle rotates 300°, the OLED display can always be viewed easily. Adjustable reciprocating contra angle, better matching effect.

Length Determination

This length measuring fuction make the endo treatment safer. The OLED screen shows the file position in real-time. The motor will gradually slow-down when approach the apical point and will stop roatate or reversely roate when the file reach the apical point.

Auto Start and Stop & Auto Reverse and Stop & Auto Apical Slow-down

When used in intergrated mode, the motor will automatically start when the file in inserted into the canal and stop when the file is taken out. Automatically reverse/stop, when the apical point is reached. Automatically slow-down as it gradually approaches the apical point. Effective prevention of file breakage.

Aviation Grade Insulated Plastic Contra Angle

Easy to use and autoclaveable. The surface for the contra angle is insulated which make the Endo Motor and Apex Locator can be used together, and no need to use the silicone sleeve to insulate.

All-Angle OLED Screen

Without viewing angle limit, clear display can be guaranteed even under stong light.

Maximum Compatability

Built-in 20+ file systems, wide speed and torque range make EndoMatic compatable with most file system such as FKG, Dentsply, Edge Endo, Vakker etc on the market.

Technical Parameter:

Power input: ~100V-240V 50Hz/60Hz 0.4A Max
Handpiece Lithium battery: 3.7V/ 2000mAh
Power output: DC15V/ 1A
Speed rang: 100rpm~1000rpm
Torque rang: 0.4Ncm~5.0Ncm (4mNm~50mNm)

Packing List:

Charging Base *1
Motor handpiece *1
Contra angle *1
Spray nozzle *1
Measuring wire *1
File clip *1
Lip hook *1
Touch probe *1
Disposable insulation sleeves *1
Adapter *1
Built-in electrode *1
Instruction manual *1
Oualified certificate *1
Warranty card *1
Apex Locator Troubleshooting Card *1
Packing list *1

Warranty: One year's free repair for the whole unit from the date of purchase.

$700.00 $799.99

Portable Lab Micromotor Polishing High Speed Handpiece Kit 35000RPM

$90.12

Dental Wireless Endo Motor With 16:1 Electric Contra Angle 9 Programs

Dental Wireless Endo Motor With 16:1 Electric Contra Angle 9 Programs. The equipment will auto-reverse or auto reverse & stop, auto-stop according to different torque and resistance. Electric contra angle are autoclave sterilization up to 135℃. Built-in recharging and high capacity battery not only brings convenience of replace battery, but also save the cost. Light weight, ergonomic design, easy to carry.

Features：

With 16:1 electric contra angle.
The equipment will auto-reverse or auto reverse & stop, auto-stop according to different torque and resistance.
Electric contra angle are autoclave sterilization up to 135℃
Built-in recharging and high capacity battery not only brings convenience of replace battery, but also save the cost.
Light weight, ergonomic design, easy to carry.
There are 9 kinds of procedures for selection.
Note: The current model of our endodontic motor does not have a waveone function.
Our motor is designed with a range of features and modes, but it does not include the specific rotation pattern required for thed WaveOne system.
After you load the file, you need to adjust the parameters (speed and torque) in the product by yourself.

Technical Parameter：

Handle lithium battery: 3.7V/800mAh
Input: AC100V-240V;50Hz/60Hz
Output: DC5V/1A
Range of torque: 0.3Ncm-4 .0Ncm (3mNm~ 40mNm)
Range of speed: 140rpm-550rpm
Program: 9 programs
Rotation: 9 kinds

Working Modes：

Continuous working mode: Automatic Forward and Reverse Cycle after encountering resistance,it will automatically reverse.If there is no resistance after reversing,it will continue to work forward.
Left and Right Reciprocating Motion
Continuous Forward Rotation: Automatically stop when encountering obstacles Left and Right Reciprocating Motion.
Reverse Continuous: torque limit mode.
Continuous Forward Rotation: Stop automatically after encountering resistance after encountering resistance,it will automatically reverse.If there is no resistance after reversing, it will stop working.

Packing list：

Root Canal Host *1
16:1 Contra Angle *1
USB Cable *1
Wrench *1
Oil Nozzle *1
User Manual *1

1 Pc 5 Pcs 10 Pcs

$79.99 $89.99

Chuck Type:	Push button
Head Diameter:	11.6mm
Head height:	13.8mm
Bulb:	LED Light
Noise:	≤63dB
Air pressure:	0.25-0.3MPa
Bur applicable:	Ø1.59- Ø1.6mm
Rotation Speed:	≥300,000rpm
BEARING:	Ceramic bearing
Autoclavable:	135°C

Chuck Type:	Push button
Air pressure:	0.3MPA
Bur applicable:	ø2.35mm
Rotation speed:	20,000rpm
Model:	2 Hole Air motor
Warranty:	Six months

Chuck Type:	Push Button
Working Pressure:	0.25 Mpa to 0.3 Mpa
Speed:	280,000-350,000R.P.M
Bur size:	Φ1.595-Φ1.600mm
Noise:	≤ 68 dB
Hole:	2 Holes / 4 Holes
BEARING:	Ceramic bearing

Handpiece:	1PC
Wrench:	1PC
Operation Manual:	1PC

Chuck Type:	Push button
Head Type:	Standard head
Working Pressure:	0.25 Mpa to 0.3 Mpa
Speed:	280,000-350,000R.P.M
Spray:	Three water spray
Bur size:	Φ1.595-Φ1.600mm
Noise:	≤ 70 dB
Hole:	4 Holes
BEARING:	Stainless steel bearing
Autoclavable:	135°C

Package:	Handpiece1; Wrench1; English operation manual*1
Chuck type:	Push Button
Bearing:	Ceramic
Spray:	Triple
Head:	Torque
Head Size:	Ø 12.5*H13.6 mm
Bur Applicable:	Ø 1.59mm-Ø1.6mmx21mm-23mm
Air Pressure:	0.25-0.3 Mpa
Rotor Speed:	360,000-400,000 rpm
Water Flow:	90-110min/ml
Water Pressure:	0.2-0.23 Mpa
Atomization Pressure:	0.3-0.35 Mpa
Light:	LED
Luminance:	＞7000 LUX
Autoclavable:	135°C
Noise:	≤65dB
Warranty:	6 months
Holes Optional:	4 Holes And 2 Holes

Gear ratio:	1:1 direct drive
Chuck Type:	Push button
Air pressure:	0.25-0.3MPA
Bur applicable:	ø2.35mm
Rotation speed:	20,000rpm
Noise:	≤70dB
Connector:	ISO E-TYPE
Air motor hole:	2 Holes / 4 Holes

High speed handpiece:	2
Contra Angle:	1
Straight nose cone:	1
Air motor:	1
External water pipe:	1
Oil spray nozzle:	1
Wrench:	2

Chuck Type:	Button type chuck
Bur Applicable:	φ2.345-2.355mm
Spray:	Extemal irrigation system
Warranty:	1 Year (6 months for cartridge)

Package:	Contra angle1 English Operation Manual1
Gear ratio:	1:1 direct drive
Chuck Type:	Push button
Noise:	≤70dB
Air pressure:	0.3MPA
Bur applicable:	CA burs ø2.35mm
Rotation speed:	20,000rpm
Warranty:	Six months

Transmission ratio:	4:1
Angles:	17°
Frequency (strokes/min.):	12300
Max drive speed:	40,000min-1
Spray:	External water spray
Autoclavable:	135°C Autoclavable
Connect:	ISO E-Type motor
Blade thickness:	0.4 mm
Blade size:	10.5* 6mm H：3mm 15.5* 7 mm H：3mm
Handpiece weight:	95g（3.4oz）
Warranty:	one year
Package:	Handpiece1, Saw blade2, Wrench2, Tube1, English operation manual*1

Package:	Handpiece1, English Operation Manual1
Ratio:	1:1
Bur Applicable:	HP φ2.35mm
Supply Air Pressure:	0.3Mpa
Rotation Speed:	20,000r.p.m
Noise:	≤70dB
Connect:	ISO E-TYPE
Autoclavable:	135°C

For Surgical Burs:	ø 2.35mm
Bur Length:	37-52mm
Max Speed:	40,000min-1
Autoclavable :	135°C
Handpiece Weight:	85g
Package:	Handpiece*1

Transmission ratio:	3.2:1
Strokes:	1.8mm
Frequency (strokes/min.):	12300
Max drive speed:	40,000min-1
Spray:	External water spray
Autoclavable:	135°C Autoclavable
Connect:	ISO E-Type motor
Blade thickness:	0.4 mm
Blade length:	15mm、20mm、30mm
Handpiece weight:	92g(3.2oz)
Warranty:	one year
Package:	Handpiece1, Saw blade3, Wrench1, Tube1, English operation manual*1

Model:	AZ235-1C(202C8)
Brand:	AZDENT
Rotation Speed:	18,000-25,000rpm/min
Brightness:	32000Lux
Noise:	≤68dB
Chuck type:	Push button
Bur Type:	φ2.35mm
Spray:	Internal water spray
Warranty:	1 year

Package:	Air Motor1,Operation Manual1,O-ring
Gear ratio:	1:1
Air pressure:	245-392Kpa
Rotation speed:	16,000-20,000r/min
Noise:	≤70dB
Sterilization temperature:	135℃
Connector:	4 Holes

Ratio:	E-type Low Speed Handpiece 1:1 Ratio
Air Pressure:	245-392Kpa (2.5-4.0 kgf/cm²)
Water Pressure:	200Kpa (2kg)
Rotation Speed:	14,000-20,000 rpm
Bur Applicable:	Φ2.334-2.355mm
Noise:	≤60dB
Packing list:	Air motor * 1

Package:	Contra angle1 English Operation Manual1
Gear ratio:	1:1 direct drive
Chuck type:	Push button
Spray:	External spray
Noise:	≤70dB
Air pressure:	0.3MPA
Bur applicable:	FG burs ø1.6mm
Rotation speed:	20,000rpm
Warranty:	Six months

Gear ratio:	20:1
Chuck type:	Latch type
Water spray:	External and Internal
Body material:	Aluminium Alloy
Bur applicable:	CA burs Ф2.345-2.355mm
Max speed:	2000 min-1
Max torque:	50Ncm
Package:	Contra angle1, English manual1, Spray nozzle1, Y type isocon 1
Autoclavable:	135°C

Gear Ratio:	20:1, for implant
Chuck Type:	Push Button
Bur Applicable:	Ø2.35mm
Torque:	55N.cm
Max Speed:	2,000RPM
Warranty:	1 year
Autoclavable:	135°C
Packing:	Handpiece1, Wrench1, Operation manual*1

Head Type:	Standard
Rotation Speed:	280,000~350,000 RPM
Air Pressure:	0.2-0.3Mpa
Water Spray Type:	4 Spray
Bur Type:	φ1.59mm~1.60mm Standard Bur
Chuck Type:	Push Button
Package:	Handpiece 1 pc; Operation manual 1pc; Wrench 1pc

1:1	2000 - 9000	----
10:1	200 - 900	0.2 - 2.2
16:1	140 - 550	0.3 - 3.0
20:1	100-450	0.4 – 4.0

Main Engine Voltage:	3.7V
Battery Capacity:	1050mAh
Charger Input Voltage:	AC110-220V,50-60Hz
Charger Onput Voltage:	5V
Output Current:	1000mA

The Host :	1
Charging Base:	1
Lamp Holder :	2
Contra-angle :	1
Power Adapter :	1
Product Manual:	1

Rated Voltage:	110V/60HZ, 220V/50HZ（Please set the voltage before using the machine）
Power Input:	110V AC 60HZ, 220V AC 50HZ
Out Voltage:	DC 0 - 32V
Power:	65W Max
Rated Speed:	1000 - 40000RPM (Max)
Plug:	EU/US
Suitable for Bur Size:	2.35mm

Main menu

Dental Handpieces & Curing Lights

Control Box:	1 PC
Motor Handpiece:	1 PC
Foot Control:	1 PC
Handpiece Stand:	1 PC
Handpiece Holder:	1 PC
Manual:	1 PC

Gear ratio:	1:1
Features:	Internal Spray, perfect cooling, E-type,Push button
Air pressure:	245-392Kpa
Rotation speed:	16,000-20,000r/min
Noise:	≤70dB
Sterilization temperature:	135℃
Bur applicable:	Φ2.33-2.35mm

Gear ratio:	1:1
Features:	Internal Spray, Forward and Reverse
Air pressure:	245-392Kpa
Rotation speed:	16,000-20,000r/min
Noise:	≤70dB
Sterilization temperature:	135℃
Connector:	4 Holes

Gear Ratio:	20:1 Reduction
Chuck Type:	Push Button
Model:	AZ-ER 20
Bur Applicable:	φ2.345-2.355mm
Spray:	Extemal irrigation system
Max torque:	70Ncm
For:	Compatible with all E-type motors(NSK Aseptico, W&H, Nouvag Acteon)

Package:	Handpiece1; Wrench1; English operation manual*1
Handpiece Type:	High Speed
Handpiece Angle:	Straight
Chuck type:	Push Button
Bearing:	Ceramic
Spray:	Triple
Head:	Torque,0.4-0.45N
Head Size:	Ø 12.5*H13 mm
Bur applicable:	Ø 1.59mm-Ø1.6mmx21mm-23mm
Rotor Speed:	330,000-420,000 rpm
Water Flow:	90-110min/ml
Water Pressure:	0.2-0.23 Mpa
Atomization pressure:	0.3-0.35 Mpa
Noise:	≤60dB
Light:	LED
Luminance:	16000 -20000 LUX
Temperature:	5500- 6000 K
Autoclavable:	135°C
Noise:	≤60dB
Warranty:	6 months
Holes Optional:	4 Holes

Torque Wrench:	15-70Ncm
Autoclavable:	135°C Autoclavable,the box can also be sterilized
Material:	Stainless Steel
Package:	1 pc Wrench. 16 pcs drivers

Input Voltage:	100~120V/200~240V, 50-60HZ
Fuse specification:	F2AL 250V
Motor specification:	DC32V-2A
Max speed:	35000RPM
Burs size:	2.35 mm (3/32" chuck)
Plug:	EU/US
Maximum torque:	280gf.cm

Control Box:	1 PC
Handle bracket:	1 PC
102 handle:	1 PC
Wrench:	1 PC
Charger:	1 PC
Foot switch:	1 PC