Dental Handpieces & Curing Lights

• 6:1 mini head, can be used for root canal preparation
• Fit E type motor

• 45 degree angle fiber optic surgical handpiece
• Kavo MULTIflex connection
• Reject welding, 1 piece head made by CNC, more stable
  
• Imported bearings, long life, low noise and stable
  
• Water cooling, no air come out from the head, avoiding hematoma during treatment
  
• Small trauma, short time, accurate force
  
• High torque, stable speed
  
• 1 way water spray
  
• Chuck type: push button
  
• Air pressure at the back end of handpiece: 0.25-0.28MPA
  
• Bur applicable: 1.6mm 21-23mm
  
• Rotation speed: no less than 300,000rpm
  

• Made by COXO
• For KAVO Multiflex / Multiflex LUX 
• 6 Holes, fiber opric coupling
• LED bulb in coupling, white bright light
• Water control, Rotating ring for exact metering of the spray volume
• Anti suck-back device
• Coupling is autoclavable. (up to 135℃)
• Easy to load or unload the handpiece from the tubing of the dental unit 

• Low speed handpiece: 1: 1 direct drive
• Chuck type: push button
• Spray: Inner channel
• Bur applicable: Ø2.35mm
• Rotation speed: MAX40, 000rpm

• Low speed handpiece: 1: 1 direct drive
• Spray: Inner channel
• Bur applicable:HP Ø2.35mm
• Rotation speed: MAX40, 000rpm

• Spray : Inner channel
• Hole type:  4 holes
• Rotation speed: 20,000rpm

• Transmission 1:1
• Internal water 4 spray, greatly improves the cooling performance compared with the traditional 1 point water spray design.
• QPQ surface treat process, more durable.
• Compatible with universal Fiber Optic E-Type Motor
• Works on electric or air motors

• Transmission 1:1
• Internal 1 point water spray
• Compatibile with universal E-Type Motor
• Works on electric or air motors

• High-performance Brushless Endo Motor: Super high torque, high speed, lower noise, fast response, more accurate output, and more stable, ensuring more efficient & safe preparation.
• 360° Rotatable Contra-angle: 6:1 Super Mini Curved Handpiece. Smooth rotation, lower noise, and small vibration in handpiece doctors feel good during operations. Patients will have a new experience in root canal therapy.
• Clear HD LCD Display. The touchable intelligent panel is smooth and easy to clean. The clear display offers simple and clear information feedback.
• Wireless Connection: Use a wireless signal to control the handpiece, realizing flexible operation without the restraint of the tail cord.
• Wireless Charging: Adopt a wireless charging design for the handpiece. Built-in 2000mAh large capacity rechargeable lithium battery one charge for longtime operation.
• Endo Radar Pro is mainly used in Endodontic treatment. It is a cordless endo motor with root canal measurement capability. It can be used as a endo motor for preparation and enlargement of root canals, or device for measuring canal length.
• It can be used to enlarge the canals while monitoring the position of the file tip inside the canal.

• The base, handpiece, powder adapter have ONE years warranty period from the date of purchase. The contra-angle has one year warranty period. Other spare parts have six months warranty period.
  

• Ceramic bearing
• 4-water spray
• E-generator LED handpiece
• 135°C Autoclavable, Sterilization can be done with High-temperature and High-pressure repeatedly 
• With quick coupler 4-hole connection
• Healthy Machine Head System
• Push Button Needle Change Type
  
• Clean head system 
• Standard Head
• Warranty: LED Bulb 1 year warranty, Cartridge 6 months

• Fiber Optic, powerful LED, give you better vision
• New six spray system ( with 3 water 3 air spray ) can cool the treated area and the bur effectively and roundly.
• Head and cartridge with anti-dust structure, prevents suction of oral fluids in a patient's mouth into the water line of the handpiece at the spray water outlet port.
• Reject welding, complete head made by CNC, more stable
• Graceful body, simple, easy clean, easy control
• Handpiece is autoclavable. (up to 135℃)

• Made by COXO
• For KAVO Multiflex / Multiflex LUX 
• 6 Holes, fiber opric coupling
• LED bulb in coupling, white bright light
• Water control, rotating ring for exact metering of the spray volume
• Anti suck-back device
• Coupling is autoclavable. (up to 135℃)
• Easy to load or unload the handpiece from the tubing of the dental unit 

• The body is designed to be ideal for 18 degree and the head is 95 degree, provides the dentist with the best view, freedom of operation.  
• 4 port apray, unique spray angle, can accurately cover the tip of the bur. High cooling effect. 
• Special design of cartridge and air duct. Cutting force increased by 76.9%.
  

• Cartridge passed the Germany dynamic balance machine test.  
• 3 way spray, 3 air spray. 
• Head and cartridge with anti-dust structure.  
• Good cooling system, soft push button. 
• Wear-resisting, efficient operation. 
• Graceful body, simple, easy clean, easy control.
• With quick coupler,convenient to operate

• Low speed handpiece: 1: 1 direct drive
• Chuck type: wrench
• Spray: external
• Bur applicable: Ø2.35mm
• Rotation speed: MAX40, 000rpm

• Low speed handpiece: 1: 1 direct drive
• Spray: External
• Bur applicable:HP Ø2.35mm
• Rotation speed: MAX40, 000rpm

• Spray : External
• Hole type:  4 holes
• Rotation speed: 20,000rpm

• Low speed handpiece: 1: 1 direct drive
• Chuck type: push button
• Spray: External channel
• Bur applicable: Ø2.35mm
• Rotation speed: MAX40, 000rpm

• Low speed handpiece: 1: 1 direct drive
• Spray: External
• Bur applicable:HP Ø2.35mm
• Rotation speed: MAX40, 000rpm

• Spray: External
• Hole type: 4 holes
• Rotation speed: 20,000rpm

• Compatibile with universal E-Type Motor
• Connection of the Spray Nozzle
• Safe needle lock
• 1:1 direct drive
• Speed range up to 40,000rpm

• Compatibile with universal E-Type Motor, works on air motors.
• External coolant supply, rotation speed: MAX40,000rpm

• 45° Better angle, easy access to the molar area. 
• Water cooling, no air come out from the head, avoiding the hematoma during treatment. 
• Anti slip body.

• LED Fiber Optic Handpiece
• Powerful, quiet and large torque 
• 20:1 gear ratio, for implant
• Excellent cooling effect
• Compatibile with universal Fiber Optic E-Type Motor
• Works on Implant motors
• 135°C  autoclavable

• High cooling effect, unique spray angle, can accurately cover the tip of the bur, complete head made by CNC, more stable. 
• Stainless steel bearing, long life, low noise, and stable. 
• Balanced impeller, cartridge passed the Germany dynamic balance machine test. 
• Shadowless Led, handpiece with generator, brilliant illumination, give you better vision, > 7000Lux. 
• Powerful cutting ability. 

• Transmission 1:1
• 1 port spray 
• Push button
• Inner Channel
• With E-generator LED
• Compatibile with universal E-Type Motor
• Works on electric or air motors

• COXO C-SMART-I Pilot True cordless Endo motor with Apex locator.
• Endo motor and apex locator 2 in 1 with LED light.
• 300 degree rotation contra angle head.
• No need to set any parameter , just choose and use 5 inch Fine color display screen.
• Appropriate slope to ensure clear observation from all angles
• Powerful Bluetooth 10m effective distance. Sound and light remind Effectively avoid wrong connection.
• Ergonomic design, more comfortable to hold and operate.
• Imported motor , powerful , mute , longer service life.

• The Smart A Brushless Endo Motor from Woodpecker is the latest in intelligent endo. The Smart App Controls allow you to effortlessness connect the Endo Motor to your preferred device (tablet, phone, watch, etc.) via Bluetooth to control, program and store data from from your endodontic procedures. There are no control buttons on the Smart A Endo Motor and it is controlled solely through the app and a third-party device of your choice.
  
• The Smart A Endo Motor is compact, sleek and only 17mm in diameter to hold. The contra angle head diameter was reduced by 12.5% and the head weight was reduced by 18%.
  
• The App has customized treatment plans where you can select pre-programmed file types (including reciprocating function) or you can easily add your own file type and preferences to save for future use. The App also allows you to store patient data about the treatment in the cloud for future reference and to get patient report (e.g., files used, file usage time, treatment performed, etc.).
  
• The Smart A Endo Motor and its App also allow for voice control through VIVI to control your Endo Motor by voice controls with command “hi vivi”. This allows you to control the Endo Motor hands-free! You can adjust the speed, direction, torque, file type, etc. by your voice.

BB Mode (Block Bypass)

• Problem: Sometimes there is dentin debris or pulp residue blocking the apex.
• Solution: The BB mode allows the file to move continuously at an angle of 90 degrees with 1 second interval between each movement. This rotation with up and down motion can bypass the block.
  

LB Mode (Ledge Bypass)

• Problem: There are many reason for ledge formation and ledge bypassing is needed to locate the original root canal.
• Solution: The LB mode allows the file to reciprocate with a gradual angle change and reciprocates with a cycle of set angle at -2, -1, 0 and +1 degrees.

• The Smart A Endo Motor from Woodpecker has a built-in apex locator with no need for a silicone sleeve.
• There is also a wireless foot pedal for easy controls.
• The Smart A Endo Motor is very quite and was compared to many other brushless endo motors in terms of noise production. The Smart A was proven to more quite than other brushless motors.

• Base: built in two 3.6V/2000mAh Li-ion battery packs, and charge  voltage is 5VD.C, 1A. 
• Motor handpiece: built in a 3.7V/600mAh Li-ion battery pack. 
• Foot Pedal: built in a 3.6V/750mAh Li-ion battery pack.
• Power adapter (Model:ADS-6AM-06N 05050EPG): 
• Input: ~100V-240V 50/60Hz 0.4A Max 
• Output: DC5V/1A
• Torque range: 0.4Ncm~5.0Ncm (4mNm~50mNm)
• Speed range: 100rpm~2500rpm

• Mini head, making it more convenient for treatment, particularly for pediatric patients.
• With LED, self-illumination, long service life up to 10000 hours, brilliant illumination, give you better vision.
• High cooling effect, unique spray angle,can accurately cover the tip of the bur.
• Powerful cutting ability.
• Imported bearing, long life, low noise, and stable, balanced impeller.

• High speed handpiece: 3 way spray 3 air
  
• Head and cartridge with anti-dust structure
  
• Chuck type: push button
  
• Bulb: LED light
  
• Noise:≤70dB
  
• Air pressure: 0.25-0.28MPA(6hole）
  
• Bur applicable: Ø1.59-Ø1.6mmx21-23mm
  
• Rotation speed: 300,000rpm
  
• Bulb power:1w
  
• Work voltage: 2.9v-3.2v
  
• Work current:160mA

• Quick coupling of high speed handpiece
  
• 6 hole coupler
  
• Optical fiber illumination
  

• Push button, quick and easy changing burs and files.
• For ENDO treatment, and can be used for root canal preparation.
• Compatible with universal E-Type Motor.
• Fit for CA burs with Ø 2.35 mm and engine files with Ø 2.35 mm.

• 316 Stainless steel body, wear resistant.
• Mini Head Speed-increasing Electric Handpiece.
• Push button, quick and easy changing burs.
• Optical fiber illumination, high brightness, provides brilliant lighting for better visibility during use.
• Compatible with universal Fiber Optic E-Type Electric Motor.
• Fit for FG burs with Ø 1.6 mm.
  
• Internal 4 way water spray, effectively cools the entire surface of the bur with a high cooling effect.
• Ceramic bearing, more stable, longer service life.
• Anti-retraction cartridge.
• Smaller head, making it easier to reach the molar.

• High cutting performance, fast and powerful.
• The 1:2 speed-up design provides sufficient power while ensuring the precision of cutting bone tissue.
• 20° Contra Angle Head Advantage: Enhanced access and maneuverability.
• For orthopedics, implants, maxillary sinus lifting bone removal and bone grinding 
  Low vibration.
• Stainless steel body, more durable.
• Twist Chuck for quick and easy bur insertion/removal.

• Precision 16:1 Gear Ratio: Delivers consistent, high-torque performance at controlled speeds for safe endodontic filing.
• Original Compatibility: Perfectly adapts to the C-SMART-I Pilot motor, ensuring accurate Apex Locator readings and motor synchronization.
• Push-Button Chuck: Allows for quick, one-handed file changes, improving clinical efficiency.
• Quiet & Smooth Operation: Advanced internal gear technology minimizes noise and vibration for patient comfort.
• Autoclavable Durability: Designed to withstand repeated high-temperature sterilization ($135°C/275°F$) for maximum hygiene and long service life.
• Slim Head Design: Provides excellent visibility and access to posterior regions (molars), even in restricted oral spaces.

• Integrated 2-in-1 System: Combines a high-performance endo motor with a sensitive built-in apex locator for real-time monitoring and safer canal preparation.

• Advanced Brushless Motor: Delivers smooth, low-noise rotation with minimal heat generation for enhanced durability and a longer service life.

• 1:1 Mini Contra-Angle: Features a compact head design for an improved field of vision and superior access to difficult-to-reach posterior areas.

• Versatile Programming: Offers 10 customizable modes and a dedicated Apex Mode, allowing for precise control across various clinical workflows.

• Cordless Ergonomics: Ultra-lightweight, wireless handpiece reduces hand fatigue and provides total maneuverability during complex procedures.

• High-Sensitivity Mapping: Equipped with a sophisticated root canal measurement system that enables easy, accurate file positioning.

• Handle×1
• Handpiece×1
• Charging Base×1
• Measurement×1
• Spanner×1
• Oil Nipple×1
• Calibration×1
• Lip Hook×2
• Power Adapter×1
• File Holder×1
• Bending Machine Silicone Sleeve×1

• Mini-Head Design: Delivers superior clinical visibility and effortless navigation in hard-to-reach posterior regions.
• 4:1 Reduction Gear: Provides high-torque, low-speed control optimized for smooth and splatter-free polishing.
• Secure Screw Chuck: Engineered specifically for stable, wobble-free attachment of screw-in prophy cups and brushes.
• Universal E-Type Fit: Fits all standard ISO E-type low-speed motors, ensuring seamless integration into your current operatory setup.
• Ergonomic Comfort: Lightweight and balanced construction minimizes wrist fatigue during routine prophylaxis workflows.

• Titanium Alloy Body: Lightweight, scratch-resistant, and ergonomically balanced to reduce hand fatigue.
• Imported Ceramic Bearings: Delivers smooth, low-noise rotation and extended clinical lifespan.
• Fiber Optic & 4-Water Spray: Provides shadow-free intraoral illumination and optimal bur cooling.
• Mini/Standard Head Options: Choose Mini for superior posterior access or Standard for maximum torque.
• 135°C Autoclavable: Fully steam-sterilizable to meet strict clinical hygiene standards.
• Low-Noise Design: Precision-fitted internal seals and connectors ensure smooth, quiet airflow and minimize clinical operating noise.

• Titanium Alloy Body: Lightweight, scratch-resistant, and ergonomically balanced to reduce hand fatigue.
• Imported Ceramic Bearings: Delivers smooth, low-noise rotation and extended clinical lifespan.
• Fiber Optic & 4-Water Spray: Provides shadow-free intraoral illumination and optimal bur cooling.
• Standard Head: Choose Standard for maximum torque.
• 135°C Autoclavable: Fully steam-sterilizable to meet strict clinical hygiene standards.
• Low-Noise Design: Precision-fitted internal seals and connectors ensure smooth, quiet airflow and minimize clinical operating noise.

• Removable design for easy replacement and maintenance.
• Compatible with E-type interface.
• Provides a more stable and brighter light source.
• Can be sterilized no more than 135℃

• Removable design for easy replacement and maintenance.
• Compatible with E-type interface.
• Provides a more stable and brighter light source.
• Can be sterilized no more than 135℃

• 4 way water; Autoclavable
  
• Ceramic bearing; Titanium alloy design
• Imported ceramic bearings 
  
• Suitable for high-intensity work
  
• High brightness fiber optic lighting
• Skillful in workmanship,reliable in quality
• Fit international brand KAVO
• 6 hole led fiber coupler/ 4 hole generator coupler
  

• Fiber optic
• Push button, quick and easy changing burs
• Internal channel
• For CA burs with Ø 2.35 mm 
• For endo or prophy (4:1)
• Compatible with universal E-Type fiber optic motor

• Adapt to E-type fiber optic handpiece
• Internal circulation cooling system, no vibration, no heat
• Prevent the clogging problems from the waters pray and cooling system
  

• High cutting performance, fast and powerful
  
• For orthopedics, implants, maxillary sinus liftingbone removal and bone grinding 
• Low vibration
• Stainless steel body, more durable
• Twist chuck for quick and easy bur insertion/ removal
• 135℃ autoclavable
  

• 4 Holes Air motor
  
• ISO E-TYPE Connect
• Autoclavable 135℃