PAIRAY'S CHIOCE

The success of the implant treatment depends on the precise tightening of the parts placed directly on the implant. A pre-stressed tightening of the screw will help avoid any risk of screw loosening. Also, high tightening torques may lead to screw fracture. A calibrated tightening can only be guaranteed through the use of a precision instrument offering a torque control system. The dynamometric manual wrench has been specially designed to meet those requirements.

• Precision instrument equipped with a torque adjustment system for screwing prosthetic components.
• 7 torque levels (5 to 35 N.cm) and universal connection of the prosthetic mandrels
• Micro head and ergonomic handle
• Reduced amplitude of movement compared with tightening using a ratchet wrench
• Only 160g for a better freedom of movement
• Universal torque wrench, recommended with most type of implants
• 135°C Autoclavable

The technical specification :

• Automatic Frequency Tracking 
• Patented Liquid Pumps, Digital Controlled 
• Function: Scaling, Perio, Endo
• Control: Wireless foot switch
• Water Supply: Auto-water supply
• Handpiece: LED handpiece

Primary vibration excursion of the tip:

• Minimum, 1um, Deviation -50%
  • Maximum. 100um, Deviation +50%

Output half-excursion:

• Minimum, O.1N, Deviation -50%
• Maximum. 2N, Deviation +50%

Warm tips:

• If the machine does not produce water, you can adjust the water knob to the maximum, step on the pedal, use the syringe attached in the package, from the water outlet, fill the water to the machine, generally need 1-2 syringe of water can flush the waterway, and then can be used normally. If you need, you can contact us first and we will send you an operation video.

• Stable output power guarantees constant light so that the solidification effect is not affected by the consumption of remaining power.
• Parallel light ensures more focused output energy and better solidification effect.
• Wireless charging corresponding to the standards of wireless charging protocol is available.
• Super capacity battery. A full charge can be used for more than 500 times continuously under 10s working of P2 mode, from full charge to low-battery alert.
• Aluminum alloy body, resistance to shatter and drop.
• Light source featuring 360-degre rotation to realize curing from all directions.
• Replaceable light source, 400nm-420nm light source with corresponding reagent enables detection of dental caries.
• A dedicated whitening roller, shooting teeth whitening gel with blue light to whiten teeth.
• Charger verifying radiation output of LED curing light effective or not.
• Solidified lens fixed on light source, bonded with all-ceramic veneer and adhered to crown and fiber-reinforced composite root canal post to make solidification effect better.
• Replaceable Lithium battery, Auto power-off.
• Watt high power blue LED light. Class: class 1
• LED Curing Light is applicable to some commonly-used resin based materials in dental clinic,such as 3M, Dentsply ,dentex etc.
• Equipment Safety Classification: Operation mode: Intermittent operation mode, Protection type against electric shock:class ll, power supply inside the set, Protection degree against electric shock: type B, Protection degree against inlet liquid: conventional equipment(IPXO) , Safety in the case of flammable anesthetic mixture with air, oxygen or nitrous oxide(not AP equipment or APG equipment).
• Note:  Do not sterilize the detachable head in autoclave. Please make sure to cover the unit with a disposable isolation sleeve before each use. 

Input: 100-240V 50/60Hz, 

Fuse: T1A 250V

1. Press button "△"for 1 second and release the button when the buzzer warns for once. Following three modes are available

• Full Power Mode: The screen shows “∏” The output light intensity is full-power. (recommended mode for clinical)
• Progressive Mode: The screen shows “ɲ” The output light intensity enhances gradually power output is to maximum after 5 seconds
• Pulsed Mode: The screen shows“∏∏”the blue light works in pulse manner

2. Press button "△"for 2 second and release the button when the buzzer warns for twice. Following three modes based on output of power density are available.

• Ultra High Power Density: The screen shows "P1" The power density is about 3200mW/cm.
• High Power Density: The screen shows "P2", The power density is about 2400mW/cm²
• Standard Power Density: The screen shows "P3", The power density is about 1600mW/cm².

3. Tap button "△" to select working time interval. In"P3"mode, the time interval can be chose from 1,2,3.4,5.10,15,20 25,30, 35, 40 second In"P2"mode, the time interval can be chose from 1,2,3.4,5, 10,15,20 second In"P1"mode, the time interval can be chosefrom 1,2.3, second Information on the screen is shown in the figure.

4. During the operation, put the disposable sleeve on the top of the main unit, aim the top at the correct position, press the ON/OF F button ("O" )and the main unit will produce 'Di' sound, the curing light radiates blue light and starts working according to the set modes Meanwhile, it starts counting down from the set working time interval, it stops working when counting down to ("O" )The screen displays the set working time interval again.

5. Operation can be stopped by paras the ON/OFF button ("O").

6. After a working cycle, operator can press the ON/OFF button ("O"). to start another working cycle. Stop operating if the equipment is burning obviously, let equipment cool down before restarting. Suggest continous working cycle less than 5 times.

7. Battery Indicator: Low power detective circuit is fixed inside of the main unit.If battery indicator in the screen has only 1 bar left, please charge in time.

8. When the battery needs to be charged. plug USB Type A jack in USB Type A plug of power adapter, and connect the plug of power adapter into the AC 100V-240V power supply, and connect Micro USB of USB cable into charge indicator in charge. The blue indicator light on charger indicates charger on standby. Put the main unit to the charging point of the charger, and the indicator light turns green, main unit is detected. Meanwhile,the indicator light at the bottom of main unit turn green, the curing light starts charging. When charging finished, the indicator light at the bottom of main unit turn blue.

9. After operating, take off the disposable sleeve and throw away, avoid reusing. Power output will be, decreased by 5-10% if using the disposable sleeve.

10. The product will turn off automatically if there is And operations within 2 minutes. Turn it on by pressing any button.

11. The depth of solidification or dental resin composite is not less than 4mm per 10 second. The recommended separation distance between Iuminous point and solidifying point is 2mm.

• Compatible with all universal disposable prophy angles
• Ergonomic design provides perfect balance
• Operate comfortable and flexible
• For teeth cleaning and polishing
• After one charge, it can last 4-6 hours

• Dental LED Curing Light Noiseless Fiber Rod Recharge 2000mw/cm²
• 5W high power
• Excellent quality with competitive price
• Quick delivery and good service
• Service tools for dental and easy to maintain and recharge conveniently
• Large capacity Li-battery can be used for a long one with full charging.
• Plenty of fiber rods with very reasonable price on sale for you replacement
• Composes of high power LED, qualified fiber rod.
• Noiseless; No liberation; Generate little heat when working.
• Imported high power LED and four chips inside.
  
• Gradually bright, shiny,bright-wide, the work of three models to choose.
• Reliable structure and easy operation.

• Insert light head into the curing light hand-piece with a twisting motion，Ensure that both the direct light source head and the light curing host are fully connected to their corresponding positions
• Connect the adapter connector to the USB Type-C charging line, and then connect the power supply. The magnet tail cap at the bottom of the host can be stably adsorbed on other metal surfaces.
• After switching on the power adapter, insert the charging port or pull out the charging port, the machine will wake up automatically, and the host screen will light up
• The main panel indicator light "orange" indicates that the battery is in charge, and the light "green" indicates that the battery is full, and the machine will automatically stop charging.
• When the host is charged for one minute in an unused state, the screen will shut down automatically, and the battery will still be charged until the battery is full。
• The battery is not fully charged prior to shipment. Please charge the battery for a minimum of 4 hours prior to first use.
• To check the battery, press and hold the time switch for 4 seconds, display screen will show: a.) 4.2 – 3.7- Battery is normal b.) Lo- Battery is low
• When battery is low, curing light circuit will automatically compensate for power output or turn the light off. Always recharge the curing light when the battery is low Lo • Direct charging option from transformer for easy transportation and mobility

Note:  Do not sterilize the detachable head in autoclave. Please make sure to cover the unit with a disposable isolation sleeve before each use. 

• 316 Stainless steel body, wear resistant.
• Mini Head Speed-increasing Electric Handpiece.
• Push button, quick and easy changing burs.
• Optical fiber illumination, high brightness, provides brilliant lighting for better visibility during use.
• Compatible with universal Fiber Optic E-Type Electric Motor.
• Fit for FG burs with Ø 1.6 mm.
  
• Internal 4 way water spray, effectively cools the entire surface of the bur with a high cooling effect.
• Ceramic bearing, more stable, longer service life.
• Anti-retraction cartridge.
• Smaller head, making it easier to reach the molar.