All Products

• RA (Right Angle) latch burs are used in slow speed handpieces.
• Greater control and feel when cutting enamel or dentin.
• Powerful cutting performance
• High quality tungsten carbide
• Package: 5 pcs /box

• Easy removal of rubber bands without hurting nails. The product comes with hatpin hook rubber band, easy to take it off and say goodbye to the damage caused by buckle and drag.
• Use the Hook Head Hook End to hook the rubber ring and gently place it at the bracket to pull and place it on the other side for fixing. With tail unloading hook design, easy to take and put, convenient and practical warm.
• Tips: by no means brute force operation, so as not to damage gums and Tooth Socket.

• Scope of application: Used for bonding dentine and enamel with resin and ceramic materials.
  
• Clinical operation steps: Pretreatment of caries and pulp protection. Use 37% phosphoric acid etchant for treatment, then clean it thoroughly with water, and dry it thoroughly with an oil-free air gun. Apply a layer of adhesive evenly on the tooth surface with a small brush. Make the adhesive layer even as far as possible with the wind power of the air gun. Irradiate with an oral light curing light source of 300mW/c㎡ for 20 seconds to cure the adhesive. Please use the composite resin filling material according to the original manufacturer's instructions, as well as the subsequent grinding and reconstruction processes.
  
• Precautions: During clinical use, the lip and adjacent teeth should be well isolated and protected. Avoid contact with eyes, mucous membranes and skin. Phenols, clove oil and zinc oxide can not be used as the bottom material of the first layer,because clove oil contains polymerization inhibitor "phenolic substances", which will directly affect the degree of polymerization of the adhesive. During the curing operation, the distance between the surface of the light curing lamp and the adhesive should be kept below 2mm, but it should not be in contact with the material. Before applying adhesives and composite resin fillings, the tooth treatment surface should avoid contamination by water and other impurities.  It is not suitable for pulp capping, and patients who are allergic to resin should not use it.
  
• Environment: This product is operated at room temperature.
  
• Storage Conditions: This product should be stored in a cool and dry place at 2°C~28°C, avoiding direct sunlight.
  
• Shelf Life: This product is valid for 2 years, please do not use expired product.
  
• Contraindications: Patients with a history of allergy to methacrylate resins are contraindicated.

• Indication for use: It is suitable for bonding of enamel and dentin. Ceramic veneer/crown/inlay and other indirect restoration bondings.
• Advantages: High bonding strength and long lasting durability. Easy infiltrate to dentin tubules. Reduce the risk of post-operative sensitivity. Compatible with all light cure restoratives. Time saving and easy to use. 

• Shank diameter: HP 2.35mm   3/32inch
• Recommended speed: 10000-20000 r/min  

•  Convenient dock base allows simple placement charging for efficient daily use
• 1st Step: Tungsten Carbide Polisher: Initially remove and adjust
• 2nd Step: Black: Initial polish
• 3rd Step: Green: Medium polish
• 4th Step: Yellow: Final polish

• Ergonomic Efficiency: Designed for a comfortable grip and effortless dispensing.
• Safe & Precise: Offers a convenient way to apply ligatures with high clinical accuracy.
• Durable Design: High color stability and fade-resistant finish for long-term use.
• Packaging: 1pc/box

• This comprehensive 6pcs set provides a versatile array of sizes for precise bone grafting procedures.
• The tool has been coated to reduce wear during use.
• Optimized for dental bone grafting, these instruments facilitate the placement of bone graft material.

• 6pcs/Set

• Highly polished finish for aesthetic and corrosion resistance.
• Perfect working ends for effective control and functionality during conducting procedures.
• Corrosion-resistant and rust-resistant can be disinfected at high temperature and pressure.
• Complete models to meet your needs.

• Material: High Precision Stainless Steel
  
• Sterilization: Autoclave
  
• Package: 3 Models
  Upper Root Forceps * 1PC
  Lower Root Forceps * 1 PC
  Universal Forceps *1 PC

• For preparing composite surface.
• Aluminum oxide impregnated. Simple, efficient and without damaging the enamel, making the surface smooth and natural.
• Single use, disposable (High temperature pressure disinfection is not allowed).

• 316 Stainless steel body, wear resistant.
• Mini Head Speed-increasing Electric Handpiece.
• Push button, quick and easy changing burs.
• Optical fiber illumination, high brightness, provides brilliant lighting for better visibility during use.
• Compatible with universal Fiber Optic E-Type Electric Motor.
• Fit for FG burs with Ø 1.6 mm.
  
• Internal 4 way water spray, effectively cools the entire surface of the bur with a high cooling effect.
• Ceramic bearing, more stable, longer service life.
• Anti-retraction cartridge.
• Smaller head, making it easier to reach the molar.

• Educational Excellence

Realistic demonstration of veneers and implant structures, bridging theory with practice for enhanced teaching and patient communication.  

• Premium Resin-Metal Composite

Durable, wear-resistant, and color-stable material, odor-free, and built for long-term use. 

• Modular Detachable Design

Effortlessly disassemble crowns, abutments, and implants for step-by-step surgical demonstrations and intuitive operation.  

• Versatile Applications

Ideal for academic training, clinical workshops, patient consultations, and lab research—multi-functional and adaptable.

• Anatomically Precise Replication

Biomimetic gum textures and trabecular bone details mirror real oral anatomy, optimizing learning efficiency.

1. Due to the different monitor and light effect, the actual color of the item might be slightly different from the color shown on the pictures. 
2. Please allow 1-3cm error due to manual measurement. 

• Made of high quality stainless steel.
  
• Extra sharp cutting edges retain their sharpness even after heat sterilization.
  
• Scissors have extra sharp cutting edges that retain their sharpness for a long time. It is 4.5 inches long scissor with a double curve to facilitate in working on the surface.
  
• Smooth surface resistance to corrosion stainless steel, high intensity and resistance to corrision. Refined and typical polishing technique enables smooth.
  
• Offer ideal shape and flexibility Weight and ideal shape design make hands comfortable and offer convenience and flexibility.

• Material:  stainless steel
  
• Length: 11.5cm (4.5")
  
• Sterilization: Autoclave
  
• Package Included:1 Piece

• For FG /CA burs  
• Made of high quality 304 stainless steel 
• The disinfection holder is for burs sterilization, you can sterilize 8 burs each time.
• Autoclavable under the high temperature of 135 and pressure of 0.22Mpa.
• Box Size: 42mm*25mm*30mm(L x W x H)
• Note: Not suitable for long burs. （Max allow 24mm long bur when close the upper cover）
• Package: 1 x Bur holder 

• The Endo 3 Ultrasonic Endo Activator is an intelligent ergonomic, wireless handpiece for activating irrigation during a root canal procedure. This unit replaces the Endo 1 and has some upgraded features. As you are aware, proper irrigant activation in the canals during a root canal plays a key role in the proper debridement and disinfection of the root canal system. The Endo 3 emits a high-frequency ultrasonic vibration to safely and effectively boost the endo irrigation used in endodontics.
• Wireless Use & Wireless Charging Base no plugs or cords.
• Larger and Clear LCD Screen for better observation by the dentist.
• Adjustable Head for Improved Access entire head of the device can be turned to the position needed.

• The Endo 3 has three Power Modes which are E1, E2, and E3 which go from low, medium to high power.
• The Endo 3 has four Time Modes which allow the ultrasonic to run for 10 seconds, 15 seconds, 20 seconds or 10 minutes.
• The Endo 3 has 2 Modes that allow it to be used as 1) Stand-by Mode Where Ready to Use or 2) Irrigation Mode.

• The Endo 3 unit comes with four (4) autoclaveable tips. The tips are smooth, non-cutting, resistant and flexible with an anti-breakage system.
  The tips are as follows:
  E96 x 2
  E99 x 2
  E70
  E71X10
• Each tip can irrigate 30-50 root canals before they should be replaced.

• Ergonomic Design: The lightweight and ergonomically crafted handpiece allows practitioners to maneuver effortlessly during procedures, significantly reducing hand fatigue and enhancing overall efficiency.
• Intuitive Operation: With its simple one-button operation, the Star Pen promotes ease of use, enabling dental practitioners to concentrate on patient care without the distraction of complex controls. Features include:

- One-Button Aspiration: Physical injection button to prevent accidental touch One-button aspiration reduce the risk of anesthetic entering the blood vessels.

 -One-Button Speed Mode Switching: Facilitates adjustable speed during injection for optimal comfort.

• Cost-Effective and Economical: Constructed from high-quality medical materials sourced from the USA, the cartridge holder can withstand thousands of autoclave cycles, making it a more economical choice with no consumables required.
• Precision Delivery: The Star Pen ensures accurate and consistent drug administration, for customized anesthesia based on patient needs. Key features include:

- High-Precision Pressure Sensor: Minimizes discomfort and significantly enhances patient safety.

 - AI Algorithm Control: Ensures computer-controlled automatic injection.

- Constant Speed Delivery: Maintains low pressure and injection accuracy of up to 0.02 ml, preventing pain associated with traditional manual injections.

• Smart Technology: The device integrates intelligent features such as:

- Voice Prompts: Alerts for speed mode and injection status, enhancing operational convenience for practitioners.

- Soothing Music: Calming music accompanies the injection process, providing patients with a relaxing and comfortable treatment experience.

- Dynamic Display: Offers real-time feedback on the percentage of anesthetic injected.

• Adjustable Injection Speeds:  two customizable speeds for patient comfort and efficient treatments, allowing clinicians to choose based on preference. The time to inject one cartridge of anesthetic is as follows:

- Low Speed: 45s - 150s

- High Speed: 170s - 310s
Additionally, a long press allows for easy switching between speed modes during injection.

• Durable Lithium Battery: The handpiece has a wireless charging design and a 2000 mAh lithium battery for extended use, with a compact base for quick recharging, ensuring the device is always ready for immediate use.
• Suitable for all anesthesia techniques including infiltration, block, and palatal. Works with all standard 1.7ml anesthetic cartridges and standard US dental needles. Transparent plastic cartridge holders are steam autoclavable to 273°F. Handpiece may be surface disinfected. One year warranty. Complete with handpiece, six cartridge holders, and 5V DC recharging base.

• Instant activation
• No refrigeration required
• Gingival protection guarantees patient comfort
• Desensitizing additives minimize sensitivity during and after procedures
• Item Code:
  IB-801, iBrite® chairside tooth whitening kit, gel-type, 3ml, 1-patient
  IB-803, iBrite® chairside tooth whitening kit, gel-type, 5-patient kit
  

• Mild reaction with low heat and without the irritation to the pulp.
• High compressive strength and flexural strength, easy to polish. 
• Well sealed edges.
• Excellent biocompatibility for a good protection of pulp and gum.
• Ideal viscosity for easy application.
• Package:
  Specifications: 75g
  Color: A1, A2, A3
  Mix Tips: 10pcs

• For finishing of enamel, composites, compomers, and porcelain.
• 135 Autoclavable
• FG (Friction Grip) 1.6mm: For use in high speed handpieces and friction grip low speed contra angle heads.
• Material: Aluminum Oxide Abrasive
• Color/Grit: White (Fine)
• Recommended Speed: 6,000-10,000 RPM  MAX:12,000 RPM
• Packaging: Box of 12 stones

• Coarse: Smoothing
• Medium: Pre-polishing
• Fine: High-shine polishing
• 3-step polishing system
• Shank diameter: RA2.35mm, for contra angle handpiece
• Material: rubber with diamond
• Recommended speed: 7,000-12,000r/min  Max: 20000r/min
• Polisher for ceramic, lithium disilicate, zirconia
• 135℃ Autoclavable
• Package: 6pcs/Box

• LED Fiber Optic Handpiece
• Powerful, quiet and large torque 
• 20:1 gear ratio, for implant
• Excellent cooling effect
• Compatibile with universal Fiber Optic E-Type Motor
• Works on Implant motors
• 135°C  autoclavable

• Smooth surface resistance to corrosion, Specially selected pure stainless steel
• High intensity and resistance to corrosion. Refined and typical polishing technique enables smooth
• The tip is inlaid with hard metal to make the pliers durable and stronger.
• Tight joints and no loose after long-term use.
• An indispensable tool in the dental clinic and orthodontic surgery.

• Smooth surface resistance to corrosion, Specially selected pure stainless steel
• High intensity and resistance to corrosion. Refined and typical polishing technique enables smooth
• The tip is inlaid with hard metal to make the pliers durable and stronger.
• Tight joints and no loose after long-term use.
• An indispensable tool in the dental clinic and orthodontic surgery.

• U6 integrates the functions of supragingival scaling, subgingival scaling, implant maintenance, cavity preparation and endodontic treatment
• The amplitude of tip is only 20-90 which will not hurt teeth and will bring patents comfortable experience during scaling treatment. 
• Intelligent degenerative feedback will automatically adjust the power level
• According to the surface state of different teeth such as soft and hard calculus, automatically output the correct power to the tip. 
• Even when dealing with stubborn calculus, the scaling will be stable and continuous
• High quality handpiece: Aluminum alloy case enables it to be autoclaved at high temperature, and makes it not easy to crack or deform. Latest handpiece sealing technique3 bring durability. 
• Ergonomic design of handpiece endows comfortable hand feeling
• Smart touch system: switch modes and adjust power level in control panel. 
• Waterproof design: Provides reliable protection, ensuring that water droplets do not interfere with use, even when hands are covered. 

• One year's free repair for the whole unit from the date of purchase.

• Shank diameter: RA 2.35mm, for contra angle handpiece
• Material: Silicone/Rubber with diamond
• For Composite /Natural teeth/Porcelain finishing and polishing
• Recommended speed: 15,000rpm/min
• Package: 14pcs/Box
  

• Made from clear plastic for optimal visibility.
• 100% brand new and of superior quality.
• Designed to provide an unobstructed view of the oral cavity.
• Safe and reliable technique for use.
• Suitable for both hospital and home environments, catering to various needs.
• User-friendly design for easy acceptance and convenience

• Apex locator is a supporting equipment of endodontic treatment, through the measurement of the length of apical teeth, helping dentists to finish the endodontic treatment.
  
• Equipped with clear bright LCD, clear image and different colors indicate the trajectory of the file clearly.
• Based on advanced multiple frequency network impedance measurement. technology and automatic calibrating ensures the measurements are accurate.
• The File clip, Lip hook and Touch probe can be autoclaved under high temperature and high pressure. Avoiding cross infection effectively.
• Battery is rechargeable, unnecessary to replace batteries repeatedly.

This equipment applies to the measurements below:

• Measurement of pulpitis, pulp necrosis, periapical periodontitis and tooth length.
• Measurement of the tooth length before restoration of post crown.
• Measurement of the tooth length of transplantation and retransplantation.

• Turbo Power Mode: Press and release “M/T” Button quickly to cycle through time options which could be 1 and 3 seconds. Its output light intensity is about 2700-3000mW/cm2.
• High Power Mode: Press and release “M/T” Button quickly to cycle through time options which could be 3 and 5 seconds. Its output light intensity is about 1800-2000mW/cm2.
• Standard Power Mode: Press and release “M/T” Button quickly to cycle through time options which could be 5, 10, 15 and 20 seconds. Its output light intensity is about 1000-1200mW/cm2.

• FDA, CE certificated.
• 100% Original Woodpecker detachable EMS handpiece.
• Autoclavable under the high temperature of 135℃ and pressure of 0.22Mpa.
• Compatable with Woodpecker UDS Scalers (UDS-A LED, UDS-E LED, UDS-L LED, UDS-K LED, UDS-P LED, UDS-N2 LED, UDS-N3 LED etc.).
• Brand new and get from the factory directly.
• One year quality guaranty.

• This suction unit is a dental high vacuum, surgical aspirator, suction and saliva ejector for dental clinic and treatment room.
• It is designed to facilitate all type of dental treatments such as surgical, implant, orthodontics with its permanent powerful suction ability. It can be easily located next to dental chair, as well as moved to another place through the wheels freely.

• Installation of GSM suction unit does not require any special equipment or assistance, it just needs a city electric power and waste water line.
• It is designed to facilitate all type of dental treatments such as surgical, implant, orthodontics with its permanent powerful suction ability. Can be easily located next to dental chair, as well as moved to any other place through the wheels freely.
• The suction motor can work 8-10 hours continuously, inside with electronic thermostat to keep longer service life.
• The hygienic perforations provide necessary air ventilation, so that the sound and heat level can be minimized during working periods. The mobile suction comes with one high volume evacuation and one saliva ejector, for the saliva ejector, on the suction tip, here with a filter, which prevents big particles from blocking the inner and outer system.

• Low noise, standard head
• Stainless body, durable, maintain stability
• Single water spray, LED handpiece integrate E-generator
• Unique electric generator, just a little air can generate sufficient power
• 135°C Autoclavable
• Ring LED lamp, shadowless lighting ensures brightness at all preparation area
• The world dental chair two holes, four holes
• Warranty: six months

• External water spray
• Short motor
• Reducing size and weight
• Updated to an integrated design in response to modern demands.Shorter and lighter than precious models. Its shorter, lighter air motor gives optimal balance, reducing stress and fatigue during treatments and enabling you to focus on the procedure at hand
• More comfortable to use
• 135°C Autoclavable

• External water spray
• Short motor
• Reducing size and weight
• Updated to an integrated design in response to modern demands.
• Shorter and lighter than precious models. Its shorter, lighter air motor gives optimal balance, reducing stress and fatigue during treatments and enabling you to focus on the procedure at hand.
• More comfortable to use

• Type: Inverted Cone with Collar
• Rigidity, sharpness and wear.
• Excellent quality and reasonable price.
• Each single box includes 5 burs of the same type.
• It is very easy to use, conveniently, and hygiene.
• The head of Diamond Burs contain a large of sand, and coverage widely.

• Excellent Quality Reverse Curve Arch Wire
  
• With constant elasticity, the curative effect is more remarkable.
• Advanced surface smooth process brings long fatigue life.
• Light continuous force for enhanced treatment
• Super ductility and strength combination, suitable for various complicated instance.

• Finishing and polishing of all composite restorations.
• Polishing of enamel after scaling.
• Removing excess cement after Orthodontic debanding.
• Removing surface stain without damaging the enamel.
• Finish for all types of composite restorations, simply by altering the contact pressure.
• Specially made for finishing and polishing of direct restorations.

• Note: Each step should be used at the recommended speed.
• First, adjust the nose to recommended speed, the polishers should be in the good condition and can achieve the great polishing effect.
• First step:  recommended speed:15000-20000; According to different parts,you can choose 1, 2 and 3 different shape polishers for rough polishing the surface.
• Second step:  recommended speed:15000; According to different parts,you can choose 4, 5 and 6 different shape polishers for fine polishing.
• Third step:  recommended speed:15000; According to different parts,you can choose 7, 8 and 9 different shape polishers for super-fine polishing.