Equipment (Small)

• High performance,100 % Guaranteed,
• Can Be 135° Sterilized.
• Fit SATELEC, DTE, NSK Ultrasonic Piezo Scaler 

• Fit Woodpecker, EMS, VRN Ultrasonic Piezo Scaler.
• Detachable Handpiece
• Autoclavable under the high temperature of 135℃ and pressure of 0.22Mpa.
  
• Avoiding cross infection effectively

• High performance,100 % Guaranteed.
• Can Be 135° Sterilized.
• Fit SATELEC, DTE, NSK Ultrasonic Piezo Scaler 

• Fit Woodpecker, VRN Ultrasonic Piezo Scaler.
• Detachable Handpiece
• Autoclavable under the high temperature of 135℃ and pressure of 0.22Mpa.
  
• Avoiding cross infection effectively

• Compatible KAVO
• VD-J1 Supragingival scaling handpiece.
• VD-J2 Periodontal scaling handpiece.
• MULTlflex quick coupling.
• 2 working models: G&P.
• Supragingival scaling: Sodium Bicarbonate, Glycine, Erythritol with particle size less than 65um.
• Periodontal and Gap scaling: Glycine,Erythritol with particle size less than 25um.
• Skin-like texture, various colors available.
• Perfect fit on the hand, relieves grip fatigue.
• Transparent Windows Design, easier observation of remaining powder.
• Two-section air-polishing handpiece design. Detachable handpiece, handpiece can be detached for maintenance if clog occurs.
• The handpiece can be rotated 360°, By adjusting different angles, it can clean the lingual side,labial side and adjacent space.
• Easy quick connection for plugging and using.

• Supragingival scoling:
  Sodium Bicarbonate, Glycine. Erythritol with particle sizeless than 65um.
• Periodontal and Gap scaling:
  Glycine Eryhritol wihportidle size less than25um.

• Interdental space scaling.
• Subgingival scaling.
• Supragingival scaling.
• Air polishing after ultrasonic scaling.
• Tongue and palate cleaning.
• Implant and abutment scaling.
• Preparation before bonding orthodontic brackets and placing restorations.
• Orthodontic brackets scaling.

• Compatible KAVO
• Skin-like texture，Various colors available
• Perfect fit on the hand，relieves grip fatigue.
• Transparent Windows Design, easier observation of remaining powder.
• Two-section air-polishing handpiece design.Detachable handpiece，handpiece can be detached for maintenance if clog occurs.
• The handpiece can be rotated 360°, By adjusting different angles,it can clean the lingual side,labial side and adjacent space.
• Easy quick connection for plugging and using.

• Supragingival scoling:
  Sodium Bicarbonate, Glycine. Erythritol with particle sizeless than 65um.

• Skin-like texture，Various colors available
• Perfect fit on the hand，relieves grip fatigue.
• Transparent Windows Design, easier observation of remaining powder.
• Two-section air-polishing handpiece design.Detachable handpiece，handpiece can be detached for maintenance if clog occurs.
• The handpiece can be rotated 360°, By adjusting different angles,it can clean the lingual side,labial side and adjacent space.
• Easy quick connection for plugging and using.

• Supragingival scoling:
  Sodium Bicarbonate, Glycine. Erythritol with particle sizeless than 65um.

Relative Humidity: 30%-75%

Air Pressure: 500hPa-1060hPa

Relative Humidity: 10%-95%

Air Pressure: 500hPa-1060hPa

• The Super Sonic scaling technology provides almost 3 times the power of traditional air scalers
• New advanced Super Sonic 17,000Hz technology provides the most power of any air scaler on the market.
• Get "Cavitron" type power with the convenience of an air scaler and without the risk to elderly patients with pacemakers.
• Vector Super Sonic Air Scaler connects to existing Midwest 4 Holes/2 Holes

Features:

• For KAVO MULTIflex Coupling
• Scratch Resistant Ti Coat
• Integrated spray
• Frequency of oscillation: 5000-6000Hz

Packing list:

• Air scaler handpiece*1
• 3 Tips (SJ1, SJ2, SJ3)
• Torque Wrench*1
• Users' Manual*1
• 4 Hole Quick Coupling*1

• Diamond-coated instrument for preparation of the occlusal surface and cervical margin.

• Directly from factory

Compatible with SATELEC, DTE, NSK scaler

• Friction resistant.
• Long life.
• Used by dentists from many different countries, all of whom have been very pleased with positive feedbacks.
  
• Peek tip for cleaning implant with minimal abrasion.
• Fit: Satelec、DTE、 NSK  ultrasonic  scaler
• Package: 1*tip

• 6 LED lamp, crystal clear images, high sensitivity, high definition. Simple and easy USB 2.0 Plug & Play installation via USB port on your computer or laptop.
• Works with Windows XP / Vista / 7 / 8 / 10 without the need for special drivers. 
• Smart design, high brightness images
• Equipped with six high intensity light sources. Penetrate into the mouth to see more clearly.
• HD camera. Autofocus ultra-wideangle lens.
• 200w high-definition pixels
• Auto focus range 5mm-50mm
• Handpiece holder with automatic power-off function

• Note: this product has its own software, and only supports its own software, can't use other software.

  The product must be connected to the computer host (preferably the USB port on the back of the host), and the software must be installed and opened on the computer. 

  If you receive the product and the software cannot be used, please contact our customer service team and we can send you new software to solve the problem.

• High Resolution 1920x720, 
• Power supply: Computer USB port powered, Rating DC-5V
• Magnification: 30 - 50 times
• LEDs: 8 white cold light LEDs
• Image output: USB, 2M cable
• Focus range: 5mm-infinite or 5mm-50mm two lens optional
• Image Sensor: Latest 1/4 CMOS Sensor and Digital Signal 
• Processing Chips
  Max. image pixels: Display 1920*720, Maximum 4.0Mega Pixels
• Focus type: Automatic focusing
• Dimensions: L/205mm, w/30mm, h/20mm
• 2 freeze buttons on the out cover, can capture, freeze and save images 
• Weight: NET220g

• USB intraoral camera  *1
• Plastic holder for camera  *1
• Free software U disk  *1
• Disposal plastic sleeve for camera  *50
• English manual  *1

• 5W blue LED light, wave length: 400-515nm.
• HD digital display screen.
• 3 high-application curing modes. 
• Handle radian adopts ergonomic design bribngs better operating experience. 
• 2200mAh supper large capacity battery. 
• Safety and hygiene. 
• Lamp cap can be rotated 360°. 
• Direct charge charging ways convenient and quick. 

• 1. Choose one of three operation modes by pressing the mode switch button on the curing light.
  Full power: The screen shows 01, the blue light radiates in full power, light intensity: 1000mW/cm2 ~1400mW/cm2.(recommending mode for clinical)
  Progressive: The screen shows 02, the blue light power increase stronger continually, after 5 seconds reaches to the highest power，light intensity: 1000mW/cm2 ~1400mW/cm2.
  Pulse: The screen shows 03, the blue light works on the pulse condition. light intensity: 1000mW/cm2 ~1400mW/cm2.
• 2. Press the "T"time set button to choose from3, 5,10, 15, 20, 25, 30, 35, 40 seconds for working time.
• 3. When the shooting period is done, press the "I" on/off button again for next shooting period. If the device becomes hot, the user should stop using the device and wait till the device cooling down. Recommending shooting period is not over 10 times.
• 4. Low battery alert: This device contains the low battery checking function. When the battery is low of power, the screen will blink.
• 5. The device will be automatically power off after 1 minutes in idle, and press any button to start.
• 6. The solidification effect for composite resin is not less than 4mm in 10 seconds.

• Insert light head into the curing light hand-piece with a twisting motion，Ensure that both the direct light source head and the light curing host are fully connected to their corresponding positions
• Connect the adapter connector to the USB Type-C charging line, and then connect the power supply. The magnet tail cap at the bottom of the host can be stably adsorbed on other metal surfaces.
• After switching on the power adapter, insert the charging port or pull out the charging port, the machine will wake up automatically, and the host screen will light up
• The main panel indicator light "orange" indicates that the battery is in charge, and the light "green" indicates that the battery is full, and the machine will automatically stop charging.
• When the host is charged for one minute in an unused state, the screen will shut down automatically, and the battery will still be charged until the battery is full。
• The battery is not fully charged prior to shipment. Please charge the battery for a minimum of 4 hours prior to first use.
• To check the battery, press and hold the time switch for 4 seconds, display screen will show: a.) 4.2 – 3.7- Battery is normal b.) Lo- Battery is low
• When battery is low, curing light circuit will automatically compensate for power output or turn the light off. Always recharge the curing light when the battery is low Lo • Direct charging option from transformer for easy transportation and mobility

Note:  Do not sterilize the detachable head in autoclave. Please make sure to cover the unit with a disposable isolation sleeve before each use. 

• FDA, CE certificated.
• 100% Original Woodpecker detachable handpiece.
• Autoclavable under the high temperature of 135℃ and pressure of 0.22Mpa.
• Sealed with tubing compatible with Woodpecker ultrasonic piezo scalers DTE D1 (Compatible with SATELEC).
• Brand new and get from the factory directly.
  

• Color: Beige
• Material: Plastics & Metals
• Weight: 4.6OZ
• Package: 1Piece

• Brand : Woodpecker
  
• Model: TD-1L, for DTE
  
• Package Including: 1Pc Torque Wrench
  
• It can be autoclavable under the high temperature of 134℃
  
• It was used to remove the scaler tips or screw the scaler tips.
  
• FDA CE certificated.

• Alumina sandblasting gun
• Alumina sandblast guns have proven to be the most valuable tools in the dental field thanks to their effective, powerful effects and extensive application methods.
• Alumina sandblasting guns provide precise surface micro-grain treatment that can increase adhesion up to 400%.
• The surface that has just been etched is more active, so it can increase the chemical adhesion and optimize the bonding effect.
• It can be applied to all metal materials, composite materials and ceramic materials.

• Product use for : to increase the viscosity of the tactile surface, roughening.
• High-temperature and high-strength engineering material sand tanks to ensure a firm grip structure.
• High sensitive touch switch, start and stop by the heart.
• Convenience and gas connection.
• The surface of the metal composite material, tungsten Steel, fiber post, inlay surface.
• With water.

• Extraoral application, used for:
• Fiber post;
• Inlay/onlay;
• Maryland Bridge;
• Metal/Porcelain crown;
• Orthodontic brackets and holder;
• Defect detection of metal casting restorations;
• Inspection of metal crown restoration defects detection;
• Check the precise installation and occlusion of the metal crown.
• Surface cleaning and micro roughening treatment before bonding;
• Remove the original adhesive layer cement before the second bonding;

• Aluminum Oxide, 90 micron, tan Rapid removal of cements from metals.Preparation of metals for bonding. 
• Aluminum Oxide, 50 micron, white General bonding preparation of metallic and nonmetallic surfaces.(Will not discolor porcelain or composites). 
• Microprophy B, white Stain removal.Pit and fissure preparation.Sodium Bicarbonate,Flavored. 
• SA-85 Remove resin paste without enamel erosion.
• Glass Beads, 90 micron, white Satin luster texturing metal surfaces to reduce brightness. Clean dentures. Not for bonding or intraoral use.

• True Ergo Design – Prism optics allow upright posture, reducing neck strain by 60%+ vs. Traditional loupes.
• Wider & Deeper FOV – Each model has a fixed high magnification (3.0x–6x) while maintaining a large, clear field of view, ideal for implants and endodontics.
• Longer Working Distance– More space for instrument maneuverability without hunching.
• Plug-and-Play Lighting – Compatible with modular LED headlights for shadow-free illumination. 5.Career-Saving Comfort – Prevents chronic cervical/lumbar damage for long-term practice sustainability. 
• Breaking the concept of tilt angle, dentists used to work with their heads down, even when wearing magnifying glasses, they still had to lower their heads down. While treating patients and helping them achieve health, these also harmed the health of doctors. For this purpose, we have specially developed this Ergo magnifying glass to reduce the pressure on the back, neck, and eyes of doctors during work, allowing them to work healthily, easily, and efficiently.
• When you take care of others, Ergo magnifying glasses help protect your bone health, making it easy and comfortable for you to work every day.
• Health tips:
  In both standing and sitting positions, the average weight of an adult's head ranges from 4.5 to 5.4 kg. When tilted, the neck load can reach 27 kg, which may lead to premature disc wear.
• It should be noted that these loupes are not intended to be focused by screwing them down, so they may not be suitable for users who are nearsighted or who have a significant vision imbalance between their two eyes.
  

• True Ergo Design – Prism optics allow upright posture, reducing neck strain by 60%+ vs. Traditional loupes.
• Wider & Deeper FOV – Larger field of view even at high magnification (3.0x-6x), ideal forImplants/endodontics.
• Longer Working Distance– More space for instrument maneuverability without hunching.
• Plug-and-Play Lighting – Compatible with modular LED headlights for shadow-free illumination. 5.Career-Saving Comfort – Prevents chronic cervical/lumbar damage for long-term practice sustainability. 
• Breaking the concept of tilt angle, dentists used to work with their heads down, even when wearing magnifying glasses, they still had to lower their heads down. While treating patients and helping them achieve health, these also harmed the health of doctors. For this purpose, we have specially developed this Ergo magnifying glass to reduce the pressure on the back, neck, and eyes of doctors during work, allowing them to work healthily, easily, and efficiently.
• When you take care of others, Ergo magnifying glasses help protect your bone health, making it easy and comfortable for you to work every day.
• Health tips:
  In both standing and sitting positions, the average weight of an adult's head ranges from 4.5 to 5.4 kg. When tilted, the neck load can reach 27 kg, which may lead to premature disc wear.
• It should be noted that these loupes are not intended to be focused by screwing them down, so they may not be suitable for users who are nearsighted or who have a significant vision imbalance between their two eyes.

• FDA, CE certificated.
• 100% Original Woodpecker detachable SATELEC handpiece.
• Autoclavable under the high temperature of 135℃ and pressure of 0.22Mpa.
• Applicable for: D3, V2, D6, D5, V3, D7, V3, V2