Hot Item

• Wireless handhele, stable injection, intelligent
• Three pattern
  Note：The following injection speed is: about 1.7-1.8ml Injection time
  Fast：80-100S
  Middle：110-150S
  PDL：180-220S
  
• Adaptor working voltage：100-240V, 50/60Hz
• Battery：3.7V, 200mAh

• Alumina sandblasting gun
• Alumina sandblast guns have proven to be the most valuable tools in the dental field thanks to their effective, powerful effects and extensive application methods.
• Alumina sandblasting guns provide precise surface micro-grain treatment that can increase adhesion up to 400%.
• The surface that has just been etched is more active, so it can increase the chemical adhesion and optimize the bonding effect.
• It can be applied to all metal materials, composite materials and ceramic materials.
• After use, do not put sand powder in the product, just flush it with air and water.
• The Dental Alumina Air Abrasion Polisher is not suitable for autoclaving. If you want to disinfect, it is recommended to wipe with alcohol.

• Product use for : to increase the viscosity of the tactile surface, roughening
• High-temperature and high-strength engineering material sand tanks to ensure a firm grip structure.
• High sensitive touch switch, start and stop by the heart.
• Convenience and gas connection.
• The surface of the metal composite material, tungsten Steel, fiber post, inlay surface.

• Aluminum Oxide, 90 micron, tan Rapid removal of cements from metals.Preparation of metals for bonding. 
• Aluminum Oxide, 50 micron, white General bonding preparation of metallic and nonmetallic surfaces.(Will not discolor porcelain or composites). 
• Microprophy B, white Stain removal.Pit and fissure preparation.Sodium Bicarbonate,Flavored. 
• SA-85 Remove resin paste without enamel erosion.
• Glass Beads, 90 micron, white Satin luster texturing metal surfaces to reduce brightness. Clean dentures. Not for bonding or intraoral use.

• Remains constantly active, reducing the number of archwire changes.
  
• Maximum patient comfort with fewer wire changes
• Extra smooth finish reduces friction enabling teeth to move easily along archwire.
• Higher elasticity with lower rigidity
• Unsurpassed quality at an economical price

• LED Screen, high quality plastic handle.
• Noiseless and no vibration when working
• Lithium battery with large capacity
• Three Modes: Gradually mode/Flashing mode/All light mode
• Automatically power down: It will be turned automatically off automatically without pressing button for 3 minutes.
• Solidification time is :40 s. Every ten seconds, sound signal to remind operator. The length of work time can be controlled freely. 
• It has self-protection against exceeding heat after continuous long time work that power– off  by itself. After the temperature is normal, operator can use it again.
• The LED is longevity. Cold light source, no fan. Avoid the infection, cause of air movement. 

The success of the implant treatment depends on the precise tightening of the parts placed directly on the implant. A pre-stressed tightening of the screw will help avoid any risk of screw loosening. Also, high tightening torques may lead to screw fracture. A calibrated tightening can only be guaranteed through the use of a precision instrument offering a torque control system. The dynamometric manual wrench has been specially designed to meet those requirements.

• Precision instrument equipped with a torque adjustment system for screwing prosthetic components.
• 7 torque levels (5 to 35 N.cm) and universal connection of the prosthetic mandrels
• Micro head and ergonomic handle
• Reduced amplitude of movement compared with tightening using a ratchet wrench
• Only 160g for a better freedom of movement
• Universal torque wrench, recommended with most type of implants
• 135°C Autoclavable

• Available for various E-type motors in accordance with ISO standard.
• Autoclavable to 135 ℃
• Sterilization can be done with High-temperature and High-pressure repeatedly.

• Fit international brand NSK
• 6 hole led fiber coupler
• Optical fiber illumination
• 3 way water
• Standard head
• Ceramic bearing
• 135℃ autoclavable

• 20:1 gear ratio
• Ergonomic comfort grip 
• Provides sufficient force at low speed
• Provide sufficient torque, meet the requirements of torque output at the dental implant system condition of 55N.cm
• Available for various E-type motors in accordance with ISO standard
• It can be keep enough torque after many time used 
• Easy to assemble and split,disinfect and sterilize compltely with a long life span,avoiding cross infection and cartridge corrosion

• Equipped with three different sizes of work tips and it can meet multiple clinical needs.
  
• Pre-bent work tip for easier operation.
• Clamping and locking design helps you catch every broken file.
• Stainless Steel Circumcision Trocar, circumcision trocar needle and clamping needle core made of nickel-titanium alloy, anti-fatigue, and anti-fracture. 
• 134°C Autoclavable, Can be used repeatedly.

• Transmission 1:1
• Internal water 4 spray, greatly improves the cooling performance compared with the traditional 1 point water spray design.
• QPQ surface treat process, more durable.
• Compatible with universal Fiber Optic E-Type Motor
• Works on electric or air motors

• 45° Better angle, easy access to the molar area. 
• Water cooling, no air come out from the head, avoiding the hematoma during treatment. 
• Anti slip body.

• 360° Swivel for superb maneuverability. 
• 135 Degree heat disinfection.
• Ergonomic design provides perfect balance.
• Compatible with all standard disposable Prophy Angles, Plastic or Metal.
• Smooth, vibration-free operation up to 3,000 RPM.
• Prophy handpiece with Friction grip chucking, just push in or pull out the prophy head.
• Premium Plus Prophy Air Motor Handpiece is intended to be used with a disposable prophy angle and prophy paste by a trained dental  professional to perform dental prophylaxis.
  

• NX3 Nexus™ Third Generation is a permanent adhesive dental cement system with an innovative chemistry for unmatched esthetics, adhesion and great versatility. 
• Delivery system choices include an automix syringe for dual-cure indications and a light-cure cement for multiple units where unlimited work time is needed. The automixing dual-cure cement can be used for all indirect applications, including veneers. With Kerr's proprietary amine-free initiator system and optimized resin matrix,
• NX3 is the first truly color-stable adhesive resin cement.
• Item Code: 33643 ,33644

• Self-Adhering Flowable Composite.
• Vertise Flow shares the same characteristic inherent in self-etch materials and reduces the chance of post-op sensitivity. 
• Item Code:  34241-A1, 34242-A2.

• Contains: 2 x 2g syringes, 20 dispensing tips, 20 brushes, technique guide, instructions.

• Flowable Light Cure Composite
• Item Code:  33372-A1, 33373-A2, 33374-A3 

• 4/Package

• Universal Nanohybrid Dental Composite
• Optimal handling, non-slumping
• Superb ease of placement
• Long-lasting polishability
• Item Code:  34347-A1

• 20 Unidose Tips (0.2 g per tip), 4 g total

• Premium gold-plated finish significantly reduces the risk of patient allergic reactions.

• Integrated round mesh base ensures superior bonding strength and clinical durability.

• The flexible chain provides consistent corrective force and can be cut to any required length.

• Works seamlessly with other orthodontic accessories to assist in complex tooth alignment.

• Packaging: 10pcs/box

• Stable output power guarantees constant light so that the solidification effect is not affected by the consumption of remaining power.
• Parallel light ensures more focused output energy and better solidification effect.
• Wireless charging corresponding to the standards of wireless charging protocol is available.
• Super capacity battery. A full charge can be used for more than 500 times continuously under 10s working of P2 mode, from full charge to low-battery alert.
• Aluminum alloy body, resistance to shatter and drop.
• Light source featuring 360-degre rotation to realize curing from all directions.
• Replaceable light source, 400nm-420nm light source with corresponding reagent enables detection of dental caries.
• A dedicated whitening roller, shooting teeth whitening gel with blue light to whiten teeth.
• Charger verifying radiation output of LED curing light effective or not.
• Solidified lens fixed on light source, bonded with all-ceramic veneer and adhered to crown and fiber-reinforced composite root canal post to make solidification effect better.
• Replaceable Lithium battery, Auto power-off.
• Watt high power blue LED light. Class: class 1
• LED Curing Light is applicable to some commonly-used resin based materials in dental clinic,such as 3M, Dentsply ,dentex etc.
• Equipment Safety Classification: Operation mode: Intermittent operation mode, Protection type against electric shock:class ll, power supply inside the set, Protection degree against electric shock: type B, Protection degree against inlet liquid: conventional equipment(IPXO) , Safety in the case of flammable anesthetic mixture with air, oxygen or nitrous oxide(not AP equipment or APG equipment).
• Note:  Do not sterilize the detachable head in autoclave. Please make sure to cover the unit with a disposable isolation sleeve before each use. 

Input: 100-240V 50/60Hz, 

Fuse: T1A 250V

1. Press button "△"for 1 second and release the button when the buzzer warns for once. Following three modes are available

• Full Power Mode: The screen shows “∏” The output light intensity is full-power. (recommended mode for clinical)
• Progressive Mode: The screen shows “ɲ” The output light intensity enhances gradually power output is to maximum after 5 seconds
• Pulsed Mode: The screen shows“∏∏”the blue light works in pulse manner

2. Press button "△"for 2 second and release the button when the buzzer warns for twice. Following three modes based on output of power density are available.

• Ultra High Power Density: The screen shows "P1" The power density is about 3200mW/cm.
• High Power Density: The screen shows "P2", The power density is about 2400mW/cm²
• Standard Power Density: The screen shows "P3", The power density is about 1600mW/cm².

3. Tap button "△" to select working time interval. In"P3"mode, the time interval can be chose from 1,2,3.4,5.10,15,20 25,30, 35, 40 second In"P2"mode, the time interval can be chose from 1,2,3.4,5, 10,15,20 second In"P1"mode, the time interval can be chosefrom 1,2.3, second Information on the screen is shown in the figure.

4. During the operation, put the disposable sleeve on the top of the main unit, aim the top at the correct position, press the ON/OF F button ("O" )and the main unit will produce 'Di' sound, the curing light radiates blue light and starts working according to the set modes Meanwhile, it starts counting down from the set working time interval, it stops working when counting down to ("O" )The screen displays the set working time interval again.

5. Operation can be stopped by paras the ON/OFF button ("O").

6. After a working cycle, operator can press the ON/OFF button ("O"). to start another working cycle. Stop operating if the equipment is burning obviously, let equipment cool down before restarting. Suggest continous working cycle less than 5 times.

7. Battery Indicator: Low power detective circuit is fixed inside of the main unit.If battery indicator in the screen has only 1 bar left, please charge in time.

8. When the battery needs to be charged. plug USB Type A jack in USB Type A plug of power adapter, and connect the plug of power adapter into the AC 100V-240V power supply, and connect Micro USB of USB cable into charge indicator in charge. The blue indicator light on charger indicates charger on standby. Put the main unit to the charging point of the charger, and the indicator light turns green, main unit is detected. Meanwhile,the indicator light at the bottom of main unit turn green, the curing light starts charging. When charging finished, the indicator light at the bottom of main unit turn blue.

9. After operating, take off the disposable sleeve and throw away, avoid reusing. Power output will be, decreased by 5-10% if using the disposable sleeve.

10. The product will turn off automatically if there is And operations within 2 minutes. Turn it on by pressing any button.

11. The depth of solidification or dental resin composite is not less than 4mm per 10 second. The recommended separation distance between Iuminous point and solidifying point is 2mm.

• Contains 50 unidose packages, each with 0.4ml of varnish and one applicator brush.
• Contains Tri-Calcium Phosphate to help remineralize teeth.
• Dries to natural enamel color.
• Contains Xylitol for caries prevention.
• Treats dentin hypersensitivity.

• Pink (Medium): Pre-polishing. Grey (Fine ): High-gloss polishing 
  
• 2 step polishing
• Applicable to all parts of the tooth body
• Material: silicone with diamond
• High polishing efficiency and good effect
• No need to glaze after polishing
• 135°C Autoclavable

• This prophy air motor is intended to be used with disposable prophy angle and prophy paste by a trained dental professional to perform dental prophylaxis.
• Smooth, vibration-free.
• Ergonomic design provides perfect balance, 360 degree swivel.
• Compatible with all most standard disposable prophy angles.

• Use For Dental Orthodontics treatment.
  
• High strength. Gentle and continuous force. Good memory.
• High elasticity and excellent rebound Medical grade polyurethane
• Latex free, safe for sensitive patients.

• Bends vertical loops accurately in orthodontic wires ≤ 0.7 mm.
• Smooth, kink-free loops without wire damage. Ergonomic handles for fatigue-free use. 
• Durable, autoclavable stainless steel. Lightweight with precise control.

• Smooth, Burr-Free Results: Delivers clean cuts that reduce sharp edges, enhancing patient comfort and safety.
  
• Ergonomic Handle: Non-slip, comfortable grip reduces hand fatigue during prolonged use.
  
• Durable Stainless Steel: Corrosion-resistant and built to withstand repeated sterilization.
  
• Versatile Application: Suitable for both stainless steel and titanium orthodontic wires.
  
• Easy to Use: Lightweight design allows for effortless one-hand operation.
• Precision Cutting: Three-prong tip design ensures accurate trimming of excess orthodontic wire with minimal effort.

• Exceptional Mechanical Strength: Rodin Sculpture 2.0 offers superior resistance to wear and fracture sets new benchmarks in the ceramic-nanohybrid industry, providing patients with enduring long-term solutions.
• Unmatched Aesthetics: With a choice of 16 Vita Classic shades and 2 additional bleach shades, clinicians gain unprecedented customization options to craft each restoration to perfection, matching the patient’s unique smile effortlessly.
• ‍ADA Approval for Permanent Restorations: Like its predecessor, Rodin Sculpture 2.0 is predominantly ceramic filled, making it eligible for 2023 ADA insurance code reimbursements, delivering substantial benefits to both practitioners and patients.
• Superior Radiopacity: Dental clinicians will appreciate Rodin® Sculpture 2.0’s exceptional radiopacity, guaranteeing superior X-ray clarity. This feature facilitates precise fit checking of printed restorations, elevating diagnostic accuracy to new heights.
• Elevated Aesthetics: For further aesthetic enhancements, Rodin® Sculpture 2.0 seamlessly pairs with acrylic-based light-curable stain and glaze systems, such as Rodin® Palette. This dynamic combination unlocks endless possibilities for fine-tuning the appearance of restorations.
• Applications: Bridges, Single Crown, Inlays and Onlays, Implants
• Package: 1.2kg/Bottle
  
• Item Code:
  23869, Rodin Sculpture 2.0, Shade 0M3
  23871, Rodin Sculpture 2.0, Shade B1
  23875, Rodin Sculpture 2.0, Shade A1
  23876, Rodin Sculpture 2.0, Shade A2
  23877, Rodin Sculpture 2.0, Shade A3
  23881, Rodin Sculpture 2.0, Shade C2
  23870, Rodin Sculpture 2.0, Shade 0M1
  23872, Rodin Sculpture 2.0, Shade B2
  23873, Rodin Sculpture 2.0, Shade B3
  23874, Rodin Sculpture 2.0, Shade B4
  23878, Rodin Sculpture 2.0, Shade A3.5
  23879, Rodin Sculpture 2.0, Shade A4
  23880, Rodin Sculpture 2.0, Shade C1
  23882, Rodin Sculpture 2.0, Shade C3
  23883, Rodin Sculpture 2.0, Shade C4
  23884, Rodin Sculpture 2.0, Shade D2
  23885, Rodin Sculpture 2.0, Shade D3
  23886, Rodin Sculpture 2.0, Shade D4

• No easy to puncture.
• Power free, protect your hands more effectively.
• Finger fingertip pitted surface design.
• Wide range of applications: medical Industry、home Cleaning、gardening、industrial maintenance and so on.
• Passed the FDA/ASTM D6319 and other certifications.
• The upgraded material has good resilience and flexiblity.
• Does not affect the touch screen, easy to wear.

• Torque range: ＞2N.cm
  
• With 6 speed ranges: 500rpm, 1000rpm, 1500rpm, 2000rpm, 2500rpm, 3000rpm
• Compatible with all universal disposable prophy angles
• Wireless handpiece, easy operation
• Ergonomic design provides perfect balance
• Operate comfortable and flexible
• For teeth cleaning and polishing
• Fully charged takes 3.5 hours, can use 6 hours

• Includes recycling kit and access to the online compliance portal with automatic recycling e-certificates
  
• ISO 11143 Certified (exceeds ISO standards at 99.3%)
  
• Yearly replacement offers new canister each year, reducing/eliminating smell and bio-hazard build up
  
• Works with wet and dry vacuums
• Compact design offers freedom from water cavity (reduces bio-hazard buildup).
• Package: 1 x Replacement Canister only

• Bonding for metal and ceramic bracket.
• Light cure feature enable extensive working time for bracket placement and adjustment.
• Immediate bonding strength can be achieved after light cure. Archwire can be tied up right following the cure.
• Strong and reliable bonding strength. Bonding to enamel is around 20Mpa to ensure no bracket breaking off from tooth during long period of treatment.
• Excellent handling.

• 45 degree angle fiber optic surgical handpiece
• Kavo MULTIflex connection
• Reject welding, 1 piece head made by CNC, more stable
  
• Imported bearings, long life, low noise and stable
  
• Water cooling, no air come out from the head, avoiding hematoma during treatment
  
• Small trauma, short time, accurate force
  
• High torque, stable speed
  
• 1 way water spray
  
• Chuck type: push button
  
• Air pressure at the back end of handpiece: 0.25-0.28MPA
  
• Bur applicable: 1.6mm 21-23mm
  
• Rotation speed: no less than 300,000rpm
  

• Made by COXO
• For KAVO Multiflex / Multiflex LUX 
• 6 Holes, fiber opric coupling
• LED bulb in coupling, white bright light
• Water control, Rotating ring for exact metering of the spray volume
• Anti suck-back device
• Coupling is autoclavable. (up to 135℃)
• Easy to load or unload the handpiece from the tubing of the dental unit 

• Etching gel is a polymer thickened gel for use on enamel and dentin.
• This gel will effectively treat enamel and dentin, producing the necessary microretentive surface for successful bonding. 
  
• The polymer thickener creates thixotropic properties, enhancing handling characteristics.
  
• The etchant rinse away cleanly and quickly, leaving no residue.

• Indications: Treat dentin and enamel, Treating agent on dental restorative material. Isolate tooth and then prepare the cavity in a conservative manner. clean the entire surface with a slurry of pumice and water. Apply etchant using a tip, a disposable syringe tip, or disposable brush tip. Allow etchant to remain in palce for 15 seconds. etching time should be monitored with a stopwatch. begin timing at the end of application.  
  
• Option: Place etchant enamel first, then proceed to cover dentin, for a slightly longer enamel etching time. Rinse thoroughly (at least 5 seconds) to completely remover all traces of etchant. Remove exces moisture from the tooth and proceed with the application of etching gel, waiting for 10 seconds, then rise thoroughly. then apply adhesive.
  

• Mild reaction with low heat and without the irritation to the pulp.
• High compressive strength and flexural strength, easy to polish. 
• Well sealed edges.
• Excellent biocompatibility for a good protection of pulp and gum.
• Ideal viscosity for easy application.
• Package:
  Specifications: 75g
  Color: A1, A2, A3
  Mix Tips: 10pcs

• Protect prepared teeth
• Temporarily restore the beauty of teeth
• Protect the pulp: isolate the damage of various of physical and chemical stimuli on the pulp
• Stable teeth: to prevent the shifting of preparation teeth
  
• Diagnostic role: provide diagnostic information for dental aesthetics, occlusal relationships finalization
  
• Gum Protection: Avoid gums to be hurt, prevent the collapse of the gums

• Keep oral hygiene, pay attention When Brushing
  
• Avoid eating hard or sticky food
• If the temporary crown is loose or cracked, you should contact your doctor promptly