Spend $300+, Get $25 Off

• Lithium battery
• Wireless Precise torque
• Low speed and high torque
• Speed Range: 10-50rpm
• Torque Range:10-50N.cm
• Sterilizable contra angle (Electronic handle can not be autoclaved)
• Package: 1 pc Wrench and 16 pcs drivers

• Torque Wrench:10-50N.cm
• Drivers 0.9 (Long+Short)
• Drivers 1.0(Long+Short)
• Drivers 1.2(Long+Short)
• Drivers 1.25(Long+Short)
• Drivers 1.27(Long+Short)
• Drivers 1.4(Long+Short)
• Drivers fit for ITI (Long+Short) 
• Drivers fit for  NOB (Long+Short)

• The success of the implant treatment depends on the precise tightening of the parts placed directly on the implant.
• A pre-stressed tightening of the screw will help avoid any risk of screw loosening. Also, high tightening torques may lead to screw fracture.
• A calibrated tightening can only be guaranteed through the use of a precision instrument offering a torque control system.
• The device must be only used by or under instruction of  qualified medical personnel. The personnel who use the device must be trained.

• This oil-free air compressor is designed for dental applications, delivering clean, quiet, and reliable performance. Its advanced features include anti-rust and anti-microbial interior tank coating, ultra-low noise operation, and durable continuous-run capability.

• Clean Air Assurance:
  Oil-free operation with anti-rust and anti-microbial interior tank coating. 
  
• Low Noise Design:
  Optional silent cabinet reduces noise to just 50dB+(A).
  
• Long Service Life:
  Engineered for continuous operation with stable airflow output.

• Host Unit
  
• Air Tank
  
• Emergency Stop Switch (Red Mushroom)
  
• Motor Start Switch Equipment Control Box
  
• Solenoid Valve
  
• Pressure Gauge
  
• Safety Valve
  
• Compressed Air Output Valve
  
• Wastewater & Exhaust Discharge Valve

• The air compressor automatically stops filling when the air pressure in the tank reaches 0.8 MPa, During product use, when the pressure drops to 0.5MPa, the machine will automatically restart and continue operating until the pressure returns to 0.8 MPa. This cycle repeats automatically.
• Emergency Stop Button
  Press the red button to immediately stop the machine in emergencies.
  Pull the button upward to reset after resolving the issue.
• Air Filter Maintenance
  Clean the filter regularly to prevent dust entry and maintain suction efficiency.
  Rinse the sound-damping sponge every 30-60 days.
• Tank Drainage
  Drain accumulated water every 3-5 days to maintain tank integrity.
• Inflation Time Test
  Recommended frequency: Monthly
  Procedure:
  1.Turn off power.
  2.Open drain and air outlet valves.
  3.Close both valves.
  4.Restart the machine and record the time to reach shutoff pressure.
• Note:
  Normal inflation time: 3–4 minutes.
  If exceeding 5 minutes, contact after-sales service.

• Contains 50 unidose packages, each with 0.4ml of varnish and one applicator brush.
• Contains Tri-Calcium Phosphate to help remineralize teeth.
• Dries to natural enamel color.
• Contains Xylitol for caries prevention.
• Treats dentin hypersensitivity.

• Mini head, making it more convenient for treatment, particularly for pediatric patients.
• With LED, self-illumination, long service life up to 10000 hours, brilliant illumination, give you better vision.
• High cooling effect, unique spray angle,can accurately cover the tip of the bur.
• Powerful cutting ability.
• Imported bearing, long life, low noise, and stable, balanced impeller.

• Comfortable clean lightweight easy cleaning mode.
  With national patent design More scientific More efficient
• Supragingival & subgingival mode Two-in-one.
  Amazing dental air polisher with subgingival mode.
• 0.7mm small-caliber nozzle More concentrated powder output More accurate scaling 
• 1.4mm Nozzle caliber for water measures 
  1.4mm Smaller caliber allows for more concentrated.
• Three-section air-polishing handpiece design
• Detachable handpiece.
  Woodpecker handpiece can be detached for maintenance if a clog occurs, which makes it unique among all the brands.
• 360 rotatable Pre-bendable subgingival nozzle
  Three-direction powder output One-direction water output Efficiently eliminate biofilms
  Thoroughly clear dead ends.
• User-friendly design
  A lateral transparent powder container enables easier observation of the remaining powder.
• Ergonomic design More flexible and lightweight
  Easy quick connection for plugging and using The lightweight design relieves grip fatigue.
  Suitable for all dental chairs The whole device weights about 125g, much lower than similar products on the market (135-165g) Easy to adjust the angle, flexible to apply to use.
  

• Fits all low speed handpieces
  
• Noise reducing technology makes angle run smoothly without vibration
  
• No heat build up
  
• Webbed latex free cups for easy flare and less spatter
  

• High-performance ultrasonic scaling.
• Automatic identification of scaling mode.
• Faster and more convenient scaling.
• Two-in-one: Supragingival & subgingival mode.
• Ergonomic design.

• Integrated 2-in-1 Functionality: Combines ultrasonic and air polishing technologies to optimize workspace efficiency and streamline the transition between scaling and polishing procedures.

• Subgingival Precision: Equipped with specialized subgingival handpieces and bendable nozzles capable of reaching periodontal pockets up to 9mm. This allows for effective biofilm removal with minimal impact on soft tissues.

• Automatic Frequency Tracking: The intelligent ultrasonic system automatically adjusts output frequency based on tip feedback, ensuring stable performance and enhanced patient comfort during scaling.

• Clog-Resistant Fluid System: Built-in high-efficiency air filters and optimized internal piping ensure uniform powder-air mixing, significantly reducing the risk of powder blockages.

• Intelligent Handpiece Recognition: The system automatically identifies and switches between scaling and polishing modes. All handpieces are fully autoclavable at 134°C, meeting rigorous infection control standards.

• 4 way water; Autoclavable
  
• Ceramic bearing; Titanium alloy design
• Imported ceramic bearings 
  
• Suitable for high-intensity work
  
• High brightness fiber optic lighting
• Skillful in workmanship,reliable in quality
• Fit international brand KAVO
• 6 hole led fiber coupler/ 4 hole generator coupler
  

• Premium VPS Formula: A Type 3, low-viscosity Vinyl Polysiloxane (VPS) material designed for high-precision dental impressions.
• Exceptional Detail: Optimized thixotropy and hydrophilicity ensure the material flows deeply into the sulcus, capturing bubble-free, ultra-fine details.
• Clinical Versatility: Engineered specifically for the two-step impression technique (used with Putty) and ideal for crowns, bridges, inlays, onlays, implants, and orthodontics.
• Efficient Delivery: Features a pre-loaded 1:1 ratio bio-cartridge system for consistent, hygienic mixing and effortless application.
• Safe & Durable: Fully compatible with standard clinical disinfection methods post-curing, maintaining its high dimensional stability.
• Workflow Flexibility: Available in both Normal and Fast Set options to accommodate various clinical requirements and patient needs.

1. High Flowability: Penetrates hard-to-access micro-areas like gingival sulci for complete and accurate impressions.
2. Superior Hydrophilicity:Rapidly captures fine details while minimizing bubble formation, ensuring clear impressions for precise restorations.
3. User-friendly Application:Smooth thixotropic flow supports both single-step (monophase) and two-step techniques with minimal learning curve.
4. Exceptional Stability:Maintains dimensional accuracy over time, suitable for multiple pours and long-distance lab transport.
5. Optimized Physical Properties:Combines high tensile strength, elastic recovery, and deformation resistance for reliable clinical performance.

• Mainly used for conveying impression materials and is suitable for taking oral impressions in clinical dental practice.
• Crowns, bridges, inlays, onlays, implant and orthodontics impression.
• Recommended to take two-step impression technique together with Putty.

• Fluoride Varnish - An innovative fluoride varnish specially designed for treating tooth hypersensitivity, which can be directly applied to moist enamel and dentin surfaces without isolation while achieving high adhesion efficiency. 
  
• Its unique 5% sodium fluoride formula quickly forms a protective layer that effectively blocks nerve stimulation and alleviates sensitivity symptoms. 
• The product is specially enhanced with a calcium-phosphate ion sustained-release system that promotes tooth remineralization while desensitizing, ensuring long-term dental health maintenance. 
• Available in three flavors - Mint, Strawberry, and Melon - to meet children's preferences.

For use as a fluoride-containing coating that:

• Prevents dental caries.
• Treats hypersensitive teeth.
• Treats exposed dentin and root surface sensitivity.

• Within 4 hours after application: Avoid eating, drinking, and brushing teeth. Overnight application yields optimal results. The coating continuously releases fluoride ions during this period; premature contact may compromise efficacy.
  
• Dietary restrictions: If drinking is necessary, only small amounts of room-temperature water are permitted.
  Strictly avoid:
  • Hot beverages (>40°C).
  • Alcohol-containing products (including alcoholic mouthwashes).
  
• Oral hygiene: After 4 hours, teeth may be gently cleaned with a toothbrush or floss.
  Avoid aggressive scrubbing of treated areas.
  
• Fluoride product restrictions: On the day of application, avoid using other fluoride products (e.g., gels, mouthwashes). For patients taking daily fluoride supplements (e.g., fluoride tablets), discontinue use for 2-3 days to prevent fluoride overexposure.

• Low speed handpiece: 1: 1 direct drive
• Chuck type: push button
• Spray: Inner channel
• Bur applicable: Ø2.35mm
• Rotation speed: MAX40, 000rpm

• Low speed handpiece: 1: 1 direct drive
• Spray: Inner channel
• Bur applicable:HP Ø2.35mm
• Rotation speed: MAX40, 000rpm

• Spray : Inner channel
• Hole type:  4 holes
• Rotation speed: 20,000rpm

• Cartridge passed the Germany dynamic balance machine test.  
• 3 way spray, 3 air spray. 
• Head and cartridge with anti-dust structure.  
• Good cooling system, soft push button. 
• Wear-resisting, efficient operation. 
• Graceful body, simple, easy clean, easy control.
• With quick coupler,convenient to operate

• High cutting performance,fast and powerful.
• For osteotomy or bone removal.
• Low vibration.
• Stainless steel body,more durable.
• The saw blade is replaceable
• The handpiece can be disassembled for thorough cleaning.

• Fit ISO E type handpiece
• 1.4 mm stroke
• Autoclavable
• Optimal torque
• Gear Ratio: 1:1
• Max speed：40,000r/min
• Vertical Reciprocating
• Strip:15μm 25μm 40μm 60μm 90μm

• A safe, precise and reliable method to achieve accurate interproximal stripping.
• More controllable and safer for the dentist and patient than diamond discs.
• Provides the flexibility that diamond and carbide burs can’t faster and more comfortable for the patient than manual hand stripping.

• Alumina sandblasting gun
• Alumina sandblast guns have proven to be the most valuable tools in the dental field thanks to their effective, powerful effects and extensive application methods.
• Alumina sandblasting guns provide precise surface micro-grain treatment that can increase adhesion up to 400%.
• The surface that has just been etched is more active, so it can increase the chemical adhesion and optimize the bonding effect.
• It can be applied to all metal materials, composite materials and ceramic materials.
• After use, do not put sand powder in the product, just flush it with air and water.
• The Dental Alumina Air Abrasion Polisher is not suitable for autoclaving. If you want to disinfect, it is recommended to wipe with alcohol.

• Product use for : to increase the viscosity of the tactile surface, roughening
• High-temperature and high-strength engineering material sand tanks to ensure a firm grip structure.
• High sensitive touch switch, start and stop by the heart.
• Convenience and gas connection.
• The surface of the metal composite material, tungsten Steel, fiber post, inlay surface.

• Aluminum Oxide, 90 micron, tan Rapid removal of cements from metals.Preparation of metals for bonding. 
• Aluminum Oxide, 50 micron, white General bonding preparation of metallic and nonmetallic surfaces.(Will not discolor porcelain or composites). 
• Microprophy B, white Stain removal.Pit and fissure preparation.Sodium Bicarbonate,Flavored. 
• SA-85 Remove resin paste without enamel erosion.
• Glass Beads, 90 micron, white Satin luster texturing metal surfaces to reduce brightness. Clean dentures. Not for bonding or intraoral use.

• True Ergo Design – Prism optics allow upright posture, reducing neck strain by 60%+ vs. Traditional loupes.
• Wider & Deeper FOV – Each model has a fixed high magnification (3.0x–6x) while maintaining a large, clear field of view, ideal for implants and endodontics.
• Longer Working Distance– More space for instrument maneuverability without hunching.
• Plug-and-Play Lighting – Compatible with modular LED headlights for shadow-free illumination. 5.Career-Saving Comfort – Prevents chronic cervical/lumbar damage for long-term practice sustainability. 
• Breaking the concept of tilt angle, dentists used to work with their heads down, even when wearing magnifying glasses, they still had to lower their heads down. While treating patients and helping them achieve health, these also harmed the health of doctors. For this purpose, we have specially developed this Ergo magnifying glass to reduce the pressure on the back, neck, and eyes of doctors during work, allowing them to work healthily, easily, and efficiently.
• When you take care of others, Ergo magnifying glasses help protect your bone health, making it easy and comfortable for you to work every day.
• Health tips:
  In both standing and sitting positions, the average weight of an adult's head ranges from 4.5 to 5.4 kg. When tilted, the neck load can reach 27 kg, which may lead to premature disc wear.
• It should be noted that these loupes are not intended to be focused by screwing them down, so they may not be suitable for users who are nearsighted or who have a significant vision imbalance between their two eyes.
  

•  Ergonomic 48° Declination Angle: Maintains a natural upright head posture and reduces unnecessary neck bending during procedures.
  
• Independent Vertical & Angle Adjustment: Allows precise alignment of optical path for different facial structures and working habits.
  
• Screw-Type IPD Adjustment with Locking System: Provides stable and precise IPD adjustment, preventing displacement during clinical use.
  
• 4.0X / 5.0X / 6.0X High Magnification Options: Supports different magnification levels for general dentistry, surgical, and micro procedures.
  
• Keplerian Glass Optical Lenses: Delivers high-resolution, distortion-free imaging with excellent depth perception for clinical precision.
  
• Anti-Fog Multi-Coated Optical Lenses: Ensures clear vision with reduced glare and fogging in clinical environments.
  
• Optional 5W Magnetic LED Headlight: Enables quick battery replacement and extended operating time for continuous clinical use.
• Wide Illumination Range (20,000–60,000 Lux): Delivers uniform lighting for improved visibility in different oral conditions.

• Ergonomic 48° Viewing Angle: The 48° ergonomic viewing angle promotes a natural upright posture, reducing neck and back strain during prolonged dental procedures. It improves visual alignment while enhancing overall working comfort.
  
• Multi-Layer Anti-Reflective Glass Lenses: Premium multi-layer coated glass lenses reduce reflections and glare while increasing light transmission and image contrast, delivering a brighter, clearer field of view for precise clinical work.
  
• Lightweight Flip-Up Design: The lightweight flip-up structure minimizes wearing fatigue and features a detachable minimal frame compatible with prescription lenses, offering greater flexibility for different users. 
• Precision Aluminum Alloy Hinge: Built with a durable aluminum alloy hinge and precision screw-rod adjustment system, the loupe maintains a stable viewing angle after calibration while allowing smooth, reliable flip-up operation.
• Multiple Magnification Options: Available in 3X, 4X, 5X, and 6X magnification to accommodate a wide range of dental procedures, from routine examinations to microsurgical applications.
  
• Compatible with Custom Prescription Lenses: The detachable front frame supports custom prescription lenses, allowing users with vision correction needs to enjoy clear magnified viewing without compromising comfort or optical performance.

• Drivers 0.9 (Long+Short) fit for Xive
• Drivers 1.0(Long+Short) fit for Ankylos
• Drivers 1.2(Long+Short) fit for Osstem, 3I, Megagen
• Drivers 1.25(Long+Short) fit for Cortex, Ticare, ABT, Zimmer
• Drivers 1.27(Long+Short) fit for Dentium, Dentis, Adin, EBGO, Astra, MIS
• Drivers 1.4(Long+Short) fit for ICX
• Drivers fit for NOB(Long+Short) fit for Nobel
• Drivers R165 (Long+Short) fit for Straumann

• Precision damping hinge: Smooth flip-up adjustment with stable positioning.
• Adjustable viewing height: Allows precise height alignment for optimal viewing angle and posture.
• Aluminum-magnesium build: Strong yet lightweight for durability and comfort.
• Multi-layer lens coating: Delivers sharp, bright, and clear vision.
• Independent PD control: Each side adjusts separately for personalized fit.
• Available in 2.5X and 3.5X models: Choose wide view or detailed focus as needed.
• Independent PD & Height Adjustment: Fits a wide range of users precisely.
• Screw-Rod Lock System: Prevents misalignment from accidental touch.
• Flip-Up Design: Easy to lift for patient interaction.
• Multi-Layer Coating: Reduces glare, enhances brightness and clarity.
• Working Distance: 450mm, ideal for dental and surgical applications.
• Lightweight & Comfortable: Suitable for extended procedures. 

• No easy to puncture.
• Power free, protect your hands more effectively.
• Finger fingertip pitted surface design.
• Wide range of applications: medical Industry、home Cleaning、gardening、industrial maintenance and so on.
• Passed the FDA/ASTM D6319 and other certifications.
• The upgraded material has good resilience and flexiblity.
• Does not affect the touch screen, easy to wear.

• With 2 pcs Nose Cones and 6 pcs disposable prophy angles. 
• Nose Cone is detachable, autoclavable at 134℃
• Compatible with all universal disposable prophy angles
• Ergonomic design provides perfect balance
• Operate comfortable and flexible
• The 360 rotation design of the rotating bafftle of the charging port is simple

• Apex locator is a supporting equipment of endodontic treatment, through the measurement of the length of apical teeth, helping dentists to finish the endodontic treatment.
  
• Equipped with clear bright LCD, clear image and different colors indicate the trajectory of the file clearly.
• Based on advanced multiple frequency network impedance measurement. technology and automatic calibrating ensures the measurements are accurate.
• The File clip, Lip hook and Touch probe can be autoclaved under high temperature and high pressure. Avoiding cross infection effectively.
• Battery is rechargeable, unnecessary to replace batteries repeatedly.

This equipment applies to the measurements below:

• Measurement of pulpitis, pulp necrosis, periapical periodontitis and tooth length.
• Measurement of the tooth length before restoration of post crown.
• Measurement of the tooth length of transplantation and retransplantation.

• Upgraded chip, innovation algorithm, high sensitivity.
  
• Folding, easy to adjust the visual angle.
• Equipped with clear bright 4.5’’LCD, clear image and different colors indicate the trajectory of the file clearly.
• Innovative algorithm, multi-frequency measurement, and anti-interference.
• Based on advanced multiple frequency network impedance measurement technology and automatic calibrating ensures the measurements are accurate. The accuracy rate has been improved to 97.71%.
• The accessories of the “WOODPEX III” can be autoclaved under the high temperature and high pressure. Avoiding cross infection effectively.
• Rechargeable lithium battery, unnecessary to replace batteries repeatedly.
• Buzzer alert: The buzzer will alert when the endo file is less than 2mm to the apex.
• Apex locator is a supporting equipment of endodontic treatment, through the measurement of the length of apical teeth, helping dentists to finish the endodontic treatment.
• Warranty: We offer ONE years free repair on main unit and six months on spare parts from the date of purchase with warranty card.

• When the file reached the front region of the apical foramen, the white bars displayed.
• When the file has gone to the position near by the apical foramen, the green bars displayed.
• When the file has exceeded the apical forament, the red bars displayed. A continuous beep sound will be generated at the same time.

• Handing Method:

• X-raying Method: 

• True Ergo Design – Prism optics allow upright posture, reducing neck strain by 60%+ vs. Traditional loupes.
• Wider & Deeper FOV – Larger field of view even at high magnification (3.0x-6x), ideal forImplants/endodontics.
• Longer Working Distance– More space for instrument maneuverability without hunching.
• Plug-and-Play Lighting – Compatible with modular LED headlights for shadow-free illumination. 5.Career-Saving Comfort – Prevents chronic cervical/lumbar damage for long-term practice sustainability. 
• Breaking the concept of tilt angle, dentists used to work with their heads down, even when wearing magnifying glasses, they still had to lower their heads down. While treating patients and helping them achieve health, these also harmed the health of doctors. For this purpose, we have specially developed this Ergo magnifying glass to reduce the pressure on the back, neck, and eyes of doctors during work, allowing them to work healthily, easily, and efficiently.
• When you take care of others, Ergo magnifying glasses help protect your bone health, making it easy and comfortable for you to work every day.
• Health tips:
  In both standing and sitting positions, the average weight of an adult's head ranges from 4.5 to 5.4 kg. When tilted, the neck load can reach 27 kg, which may lead to premature disc wear.
• It should be noted that these loupes are not intended to be focused by screwing them down, so they may not be suitable for users who are nearsighted or who have a significant vision imbalance between their two eyes.