1:4.2 Electric Contra Angle Handpiece 45 Degree External Water Increasing Fiber Optic

1 Pc 3 Pcs 5 Pcs

$262.89

1:4.2 Electric Contra Angle Handpiece 45 Degree Fiber Optic External Water

1 Pc 5 Pcs 10 Pcs

$174.49

4 Holes Dental Air Scaler Handpiece With 3 Scaler Tips (G1,G2,P1) - pairaydental.com

4 Holes Dental Air Scaler Handpiece with 3 Tips (G1, G2, P1)

1 Set 5 Sets 10 Sets

$28.53

Dental Electric Professional Painless Oral Local Anesthesia Delivery Device Wireless Intelligent Injector

1 Pc 5 Pcs 10 Pcs

$83.69 $104.61

4 Holes Dental Air Scaler Handpiece Super Sonic Scaling Handle with 3 Tips (G1,G2,G4)

1 Set 5 Sets 10 Sets

$27.98

VAFU LED Curing Light Cordless 1 Sec Cure Wide Specturm Metal Body OLED Screen With Caries Detector Light Meter 3200mW/cm²

VAFU LED Curing Light Cordless 1 Second DeepCure Wide Specturm Metal Body With Caries Detector Light Meter 3200mW/Cm². Aluminum alloy body, resistance to shatter and drop. 78mm² big operation area. 4 LED light chips. 360° Rotating Head. 3 modes. 3 kinds of magnetic point curing lenses, 3 power levels, 2 lamp heads option. Caries detection light head.

Overview

Stable output power guarantees constant light so that the solidification effect is not affected by the consumption of remaining power.
Parallel light ensures more focused output energy and better solidification effect.
Wireless charging corresponding to the standards of wireless charging protocol is available.
Super capacity battery. A full charge can be used for more than 500 times continuously under 10s working of P2 mode, from full charge to low-battery alert.
Aluminum alloy body, resistance to shatter and drop.
Light source featuring 360-degre rotation to realize curing from all directions.
Replaceable light source, 400nm-420nm light source with corresponding reagent enables detection of dental caries.
A dedicated whitening roller, shooting teeth whitening gel with blue light to whiten teeth.
Charger verifying radiation output of LED curing light effective or not.
Solidified lens fixed on light source, bonded with all-ceramic veneer and adhered to crown and fiber-reinforced composite root canal post to make solidification effect better.
Replaceable Lithium battery, Auto power-off.
Watt high power blue LED light. Class: class 1
LED Curing Light is applicable to some commonly-used resin based materials in dental clinic,such as 3M, Dentsply ,dentex etc.
Equipment Safety Classification: Operation mode: Intermittent operation mode, Protection type against electric shock:class ll, power supply inside the set, Protection degree against electric shock: type B, Protection degree against inlet liquid: conventional equipment(IPXO) , Safety in the case of flammable anesthetic mixture with air, oxygen or nitrous oxide(not AP equipment or APG equipment).
Note: Do not sterilize the detachable head in autoclave. Please make sure to cover the unit with a disposable isolation sleeve before each use.

Specifications

Dimensions:	33mm x 27mm x 206mm
Net weight:	160g
Power supply:	Different power supply ；Power supply is Rechargeable battery；Rechargeable Lithium battery；Standard voltage 3.7V, capacity:2200mAh；battery model ICR 18650. with protection for overvoltage, overcurrent and short-circuits
Power Adapter:	Input: 100-240V 50/60Hz, Fuse: T1A 250V
Input power:	5VA
Output:	5V 1A
Wave length:	400nm²-480nm²
Checking:	LED light works under proper use
Radiation:	850mW/cm²
Optical effective area:	75mm

Operating Instructions

1. Press button "△"for 1 second and release the button when the buzzer warns for once. Following three modes are available

Full Power Mode: The screen shows “∏” The output light intensity is full-power. (recommended mode for clinical)
Progressive Mode: The screen shows “ɲ” The output light intensity enhances gradually power output is to maximum after 5 seconds
Pulsed Mode: The screen shows“∏∏”the blue light works in pulse manner

2. Press button "△"for 2 second and release the button when the buzzer warns for twice. Following three modes based on output of power density are available.

Ultra High Power Density: The screen shows "P1" The power density is about 3200mW/cm.
High Power Density: The screen shows "P2", The power density is about 2400mW/cm²
Standard Power Density: The screen shows "P3", The power density is about 1600mW/cm².

3. Tap button "△" to select working time interval. In"P3"mode, the time interval can be chose from 1,2,3.4,5.10,15,20 25,30, 35, 40 second In"P2"mode, the time interval can be chose from 1,2,3.4,5, 10,15,20 second In"P1"mode, the time interval can be chosefrom 1,2.3, second Information on the screen is shown in the figure.

4. During the operation, put the disposable sleeve on the top of the main unit, aim the top at the correct position, press the ON/OF F button ("O" )and the main unit will produce 'Di' sound, the curing light radiates blue light and starts working according to the set modes Meanwhile, it starts counting down from the set working time interval, it stops working when counting down to ("O" )The screen displays the set working time interval again.

5. Operation can be stopped by paras the ON/OFF button ("O").

6. After a working cycle, operator can press the ON/OFF button ("O"). to start another working cycle. Stop operating if the equipment is burning obviously, let equipment cool down before restarting. Suggest continous working cycle less than 5 times.

7. Battery Indicator: Low power detective circuit is fixed inside of the main unit.If battery indicator in the screen has only 1 bar left, please charge in time.

8. When the battery needs to be charged. plug USB Type A jack in USB Type A plug of power adapter, and connect the plug of power adapter into the AC 100V-240V power supply, and connect Micro USB of USB cable into charge indicator in charge. The blue indicator light on charger indicates charger on standby. Put the main unit to the charging point of the charger, and the indicator light turns green, main unit is detected. Meanwhile,the indicator light at the bottom of main unit turn green, the curing light starts charging. When charging finished, the indicator light at the bottom of main unit turn blue.

9. After operating, take off the disposable sleeve and throw away, avoid reusing. Power output will be, decreased by 5-10% if using the disposable sleeve.

10. The product will turn off automatically if there is And operations within 2 minutes. Turn it on by pressing any button.

11. The depth of solidification or dental resin composite is not less than 4mm per 10 second. The recommended separation distance between Iuminous point and solidifying point is 2mm.

1 Set 5 Sets 10 Sets

$299.99 $359.99

MARK3 Varnish 5% Sodium Fluoride with TCP Bubble Gum/Spearmint/Caramel Flavor 50/box

$37.99

Dental Composite Polishing Wheel Kit Medium/Fine CA 2.35mm 6pcs/Box

1 Box 5 Boxes 10 Boxes

$12.46

Orthodontic Elastic Ligature Ties 7 Colors 1000 ties/pack

1 Pack 5 Packs 10 Packs

$6.73

Kerr TempBond Temporary Cement with Triclosan Automix Syringe 6g Clear

$70.00

Self-cure Orthodontic Adhesive No-Mix Direct Bonding Kit 3.5g

$18.58

Portable Dental Folding Chair Adjustable With Rechargeable LED Light Blue

$333.99 $379.99

Portable Dental Delivery Unit 4 Holes High Suction Built-in Air Compressor P204S

Portable Dental Delivery Unit 4 Holes High Suction Built-in Air Compressor P204S. FDA approved. The shell is made of black high-strength engineering plastic explosion-proof box. The oil-free motor requires no lubrication, and the drainage bottle is easy to detach and disinfect. The robust case withstand drops, and the premium motor ensures reliable performance over more than 20,000 hours. Easily assembled and powered, the unit operates with a simple foot pedal control. With a pull-out handle and wheels, Easy to Carry and Move.

*Please notice that this unit does not include any handpiece.

Features

Easy to Carry and Move: The portable case with a pull-out handle and wheels is lightweight for dentists to move it with ease.
Compact and Space-Saving: The compact treatment unit comes with a storage bag to save space.
Fully Functional: The device includes dental treatment related systems such as air system, water system, suction, and drainage systems.
Simple to Operate: Easily assembled and powered, the unit operates with a simple foot pedal control.
Steady Performance: The robust case withstand drops, and the premium motor ensures reliable performance over more than 20,000 hours.
Easy to Maintain: The oil-free motor requires no lubrication, and the drainage bottle is easy to detach and disinfect.
Intended Use: Dental Hospital, Dental Clinics, Army and Outdoor Dental Care or Treatment Establishment.

Safety Guidelines

Before operating the unit, please read the manual carefully and preserve it for future reference.
Please operate and maintain the unit strictly in accordance with the operational instructions.
The user should read the instructions supplied with the dental unit carefully.
Symbol “Attention” denotes that before using the device, read the operating manual carefully and carry out all the instructions to avoid any damage or injury.
Please contact the local agent or the manufacturer if the unit needs repairs. We will supply a high quality of service and assistance for you.

Warning

The power switch should be turned off when the machine stopped working, the transformer and solenoid valves will heat to burn if long-term power or no stop the power.
Please drain off the water when the water on 2/3 of Suction bottle, the water will come to motor if the water is higher than 2/3 on suction bottle, the air motor will leakage of electricity or burn if the water come to air motor.

Specifications

Model:	Portable Dental Unit P204S
Votalge:	110 V/60Hz(USA),220V/50Hz(Europe)
Power:	600W
Air Flow:	118L/min
Working Pressure:	0.5-0.6 Mpa
Water Bottle:	600 mL
Drainage Bottle:	1000 mL
Noise:	48dB
Net weight:	30 kg
Gross Weight：	34KG
Dimension:	41 x 29 x 63 cm
Package size：	524070CM

Standard Accessoiries

3 Way-Springe :	1pc
Saliva ejector with adjustable and powerful suction:	1pc
Handpiece Tubing(4 Hole):	2pcs
Self-contained clean water supply system (1000ml):	1pc
Self-Contained Stainless Steel Air Bottle:	1pc
Self-contained drainage bottle (1000ml):	1pc
Self-contained oil free compressor (600W motor):	1pc
Foot Control System:	1pc
Self-contained bag for storage to save your space：	1pc

$814.47 $1,039.00

Cordless 360° Rotating Hygiene Prophy Handpiece 3 Speed Settings & 2 Prophy Angles

1 Pc 5 Pcs 10 Pcs

$85.47 $95.99

Dental Piezo Motor Surgery & Implant Device 2 IN 1 Bone Cutter Touch

$1,670.00 $2,087.50

Dental Bonding Adhesive Light Cure Dentin Enamel Resin with Acid Etching Gel 37%

Dental Light Cure Dentin Enamel Resin Bonding Adhesive 5ml/Bottle. 5th generation adhesive for all classes of direct restoration. Compatible with all light cure restoratives. Time saving and easy to use.

Dentex Dental Acid Etching Gel 37% for Enamel Dentin Bonding 5 ml/Pc. This gel will effectively treat enamel and dentin, producing the necessary microretentive surface for successful bonding. The polymer thickener creates thixotropic properties, enhancing handling characteristics. The etchant rinse away cleanly and quickly, leaving no residue.

Overview for Bonding Adhesive

5th generation adhesive for all classes of direct restoration
Post and core bonding
Ceramic veneer/crown/inlay and other indirect restoration bondings
5ml/Bottle

Advantages for Bonding Adhesive

High bonding strength and long lasting durability
Easy infiltrate to dentin tubules.Reduce the risk of post-operative sensitivity
Compatible with all light cure restoratives
Time saving and easy to use

Usage for Bonding Adhesive

Enamel bonding : 30 seconds etch on enamel then apply 5th generation adhesive
Dentin bonding: 15 seconds etch on dentin then apply 5th generation adhesive

Overview for Acid Etching Gel 37%

Etching gel is a polymer thickened gel for use on enamel and dentin.
This gel will effectively treat enamel and dentin, producing the necessary microretentive surface for successful bonding.
The polymer thickener creates thixotropic properties, enhancing handling characteristics.
The etchant rinse away cleanly and quickly, leaving no residue.

Specification for Acid Etching Gel 37%

Indications: Treat dentin and enamel, Treating agent on dental restorative material. Isolate tooth and then prepare the cavity in a conservative manner. clean the entire surface with a slurry of pumice and water. Apply etchant using a tip, a disposable syringe tip, or disposable brush tip. Allow etchant to remain in palce for 15 seconds. etching time should be monitored with a stopwatch. begin timing at the end of application.
Option: Place etchant enamel first, then proceed to cover dentin, for a slightly longer enamel etching time. Rinse thoroughly (at least 5 seconds) to completely remover all traces of etchant. Remove exces moisture from the tooth and proceed with the application of etching gel, waiting for 10 seconds, then rise thoroughly. then apply adhesive.

Packing List for Acid Etching Gel 37%

Refill:	5 ml/Pc
Instruction:	1 Pc

$20.32

Shofu Beautifil Flow Plus X F00 SA0.5 A1 A2 A3 B1 BW 2.2g Syringe

From $41.00

COXO CX207-W High Speed Air Turbine Handpiece with 4 Holes Quick Coupler

1 Pc 5 Pcs 10 Pcs

$71.49

Cordless Hygiene Prophy Handpiece 360° Rotating 6 Speed Settings & 2 Prophy Angles

1 Pc 3 Pcs 5 Pcs 10 Pcs

$86.70

PureWay Eco Ii + Dental Amalgam Separator with Replacement Canister Kit for 1-10 Chairs

PureWay Eco Ii + Dental Amalgam Separator with Replacement Canister Kit for 1-10 Chairs. The PureWay Eco II+ Dental Amalgam Separator is designed to support up to 10 operatories, making it an ideal choice for busy dental practices. Its maintenance-free design ensures hassle-free operation, while the quick installation process allows for immediate use.

Note: The ECO II+ contains built‑in filters filled with metal components that are essential for amalgam separation. During shipping, some of these metal particles may shift and settle inside the unit. This is normal and does not affect the functionality or compliance of the product. The unit is fully operational and ready for use.

Overview for ECO II+Replacement Canister

Includes recycling kit and access to the online compliance portal with automatic recycling e-certificates
ISO 11143 Certified (exceeds ISO standards at 99.3%)
Yearly replacement offers new canister each year, reducing/eliminating smell and bio-hazard build up
Works with wet and dry vacuums
Compact design offers freedom from water cavity (reduces bio-hazard buildup).
Package: 1 x Replacement Canister only

Specifications for ECO II+Amalgam Separator Replacement Kit

Even easier installation and higher flow rate than previous version.
No disruptive vacuum loss! Engineered to ensure no loss of suction.
Low cost, saving dentists hundreds of dollars compared to competing systems.
Easy installation and automated recycling options.
Online documentation and e-mail maintenance alerts.
Flexibility to work with almost any vacuum system.
This separator is compatible with both dry and wet vacuum systems and includes multiple components to fit various hosing sizes, ranging from ¾” to 1.5”. With a combination body design featuring pass-through technology, it captures amalgam with an impressive 99% efficiency rate.
It is easily installed via simple connections to the vacuum line.
The compact dimensions of 8.7' x 8.7' x 13.8' maximize space efficiency, and the visible fill line meets EPA filing requirements.
The free access to a compliance portal enables easy online tracking of documents, promoting an environmentally friendly practice.

Packling List for ECO II+Amalgam Separator Replacement Kit

Eco II+ Canister Filtration System with Orange Top, Clear Cylinder	1 PC
Outlet elbow 90° with o-ring	1 PC
Connector 20/25 with o-rings	2 PCS
Adaptor ECO II	2 PCS
Secure Clamp	2 PCS
Clip ECO II+	3 PCS
Black O-rings 28x2	2 PCS
Sealing Plug ECO II Legacy	2 PCS
Sealing Plug ECO II+	2 PCS

From $399.99

Portable Dental Unit High Suction w/ Woodpecker Curing Light & Scaler Built-in Air Compressor 4 Holes P206S

Portable Dental Delivery Unit High Suction w/ Woodpecker Curing Light & Scaler Built-in Air Compressor 4 Holes P206S. FDA approved. The shell is made of black high-strength engineering plastic explosion-proof box. The oil-free motor requires no lubrication, and the drainage bottle is easy to detach and disinfect. The robust case withstand drops, and the premium motor ensures reliable performance over more than 20,000 hours. Easily assembled and powered, the unit operates with a simple foot pedal control. With a pull-out handle and wheels, Easy to Carry and Move.

*Please notice that this unit does not include any handpiece.

Features

Easy to Carry and Move: The portable case with a pull-out handle and wheels is lightweight for dentists to move it with ease.
Compact and Space-Saving: The compact treatment unit comes with a storage bag to save space.
Fully Functional: The device includes dental treatment related systems such as air system, water system, suction, and drainage systems.
Simple to Operate: Easily assembled and powered, the unit operates with a simple foot pedal control.
Steady Performance: The robust case withstand drops, and the premium motor ensures reliable performance over more than 20,000 hours.
Easy to Maintain: The oil-free motor requires no lubrication, and the drainage bottle is easy to detach and disinfect.
Intended Use: Dental Hospital, Dental Clinics, Army and Outdoor Dental Care or Treatment Establishment.

Safety Guidelines

Before operating the unit, please read the manual carefully and preserve it for future reference.
Please operate and maintain the unit strictly in accordance with the operational instructions.
The user should read the instructions supplied with the dental unit carefully.
Symbol “Attention” denotes that before using the device, read the operating manual carefully and carry out all the instructions to avoid any damage or injury.
Please contact the local agent or the manufacturer if the unit needs repairs. We will supply a high quality of service and assistance for you.

Warning

The power switch should be turned off when the machine stopped working, the transformer and solenoid valves will heat to burn if long-term power or no stop the power.
Please drain off the water when the water on 2/3 of Suction bottle, the water will come to motor if the water is higher than 2/3 on suction bottle, the air motor will leakage of electricity or burn if the water come to air motor.

Specifications

Model:	Portable Dental Unit P206S
Votalge:	110 V/60Hz(USA),220V/50Hz(Europe)
Power:	600W
Air Flow:	118L/min
Working Pressure:	0.5-0.6 Mpa
Water Bottle:	600 mL
Drainage Bottle:	1000 mL
Noise:	48dB
Net weight:	30 kg
Gross Weight：	34KG
Dimension:	41 x 29 x 63 cm
Package size：	523669CM

Standard Accessoiries

3 Way-Springe:	1pc
Saliva ejector with adjustable and powerful suction:	1pc
Handpiece Tubing(4 Hole):	2pcs
Woodpecker Ultrasonic Scaler (with LED)：	1pc
Woodpecker Curing Light：	1pc
Self-contained clean water supply system (1000ml):	1pc
Self-Contained Stainless Steel Air Bottle:	1pc
Self-contained drainage bottle (1000ml):	1pc
Self-contained oil free compressor (600W motor):	1pc
Foot Control System:	1pc
Self-contained bag for storage to save your space：	1pc

$1,104.15

Dental Light Cure Orthodontic Adhesive Kit Clear 4g

$21.59

COXO CX207-G 45° Fiber Optic High Speed Air Turbine Handpiece & 6 Holes LED Quick Coupler

1 Pc 5 Pcs 10 Pcs

$139.49

Dentex Dental Acid Etching Gel 37% for Enamel Dentin Bonding 5 ml/Pc

1 Pc 5 Pcs 10 Pcs 20 Pcs 50 Pcs

$6.63

Dental Porcelain Etch Gel 9.5% Acid Etchant with Visible Light Curing Resin Bonding Adhesive

Dental Porcelain Etch Gel 9.5% Acid Etchant for Crown Veneer 2.5ml/Syringe. It is used on ceramic based crown,veneer,inlay and onlay. 9.5% Porcelain Etch is an Etchant to make porcelain surface treatment. It can roughen the surface of porcelain and enhance the bonding strength.

Dental Visible Light Curing Universal Dentin Enamel Resin Bonding Adhesive 5ml/Bottle. Visible light curing is a resin adhesive for dentin and enamel. This product is a one-component liquid, and its main ingredients include UDMA and other multifunctional methacrylic resins. It does not contain solvents and inorganic fillers, and is safe and harmless to the human body. The product is a light-curing adhesive material, which is clinically used for the bonding of dentin and enamel. Suitable for bonding resin materials and ceramic materials.

Overview for Porcelain Etch Gel 9.5% Acid Etchant

9.5% Porcelain Etch is an Etchant to make porcelain surface treatment.
It can roughen the surface of porcelain and enhance the bonding strength.
It is used on ceramic based crown,veneer,inlay and onlay.

Packing List for Porcelain Etch Gel 9.5% Acid Etchant

Refill:	2.5ml/syringe
Disposable Tips:	3 Pcs

Overview for Visible Light Curing

Scope of application: Used for bonding dentine and enamel with resin and ceramic materials.
Clinical operation steps: Pretreatment of caries and pulp protection. Use 37% phosphoric acid etchant for treatment, then clean it thoroughly with water, and dry it thoroughly with an oil-free air gun. Apply a layer of adhesive evenly on the tooth surface with a small brush. Make the adhesive layer even as far as possible with the wind power of the air gun. Irradiate with an oral light curing light source of 300mW/c㎡ for 20 seconds to cure the adhesive. Please use the composite resin filling material according to the original manufacturer's instructions, as well as the subsequent grinding and reconstruction processes.
Precautions: During clinical use, the lip and adjacent teeth should be well isolated and protected. Avoid contact with eyes, mucous membranes and skin. Phenols, clove oil and zinc oxide can not be used as the bottom material of the first layer,because clove oil contains polymerization inhibitor "phenolic substances", which will directly affect the degree of polymerization of the adhesive. During the curing operation, the distance between the surface of the light curing lamp and the adhesive should be kept below 2mm, but it should not be in contact with the material. Before applying adhesives and composite resin fillings, the tooth treatment surface should avoid contamination by water and other impurities. It is not suitable for pulp capping, and patients who are allergic to resin should not use it.
Environment: This product is operated at room temperature.
Storage Conditions: This product should be stored in a cool and dry place at 2°C~28°C, avoiding direct sunlight.
Shelf Life: This product is valid for 2 years, please do not use expired product.
Contraindications: Patients with a history of allergy to methacrylate resins are contraindicated.

Specification for Visible Light Curing

Indication for use: It is suitable for bonding of enamel and dentin. Ceramic veneer/crown/inlay and other indirect restoration bondings.
Advantages: High bonding strength and long lasting durability. Easy infiltrate to dentin tubules. Reduce the risk of post-operative sensitivity. Compatible with all light cure restoratives. Time saving and easy to use.

Packing List for Visible Light Curing

Refill:	5 ml/Bottle
Instruction:	1 Pc

$18.19

Bio-Art Dental Aluminum Oxide Powder 90 Microns 0.8kg/Canister

$26.50 $36.99

Package:	Handpiece1, Wrench1, Oil nozzle*1
Gear Ratio:	1:4.2 increasing
Chuck type:	Push button
Bur:	FG Burs φ1.6mm
Water Spray:	4 way spray, effectively and quickly cool the needle
Spray:	External channel
Rotation speed:	168,000rpm
Fit:	Fit to ISO E-TYPE fiber motor
Autoclavable :	134°C

Head:	45°Angle Head
Gear Ratio:	1:4.2 Increasing
Chuck Type:	Push button
For:	FG Burs φ1.6mm
Water Spray:	4 way spray, effectively and quickly cool the needle
Spray:	External channel
Rotation Speed:	168,000rpm
Autoclavable:	134°C
Net weight	140g

Max.Recommended Air Pressure:	0.28MPa(2.9kgf/cm²）
Working Frequency:	6200-6450Hz
Autoclavable Sterilize:	135℃
Accessory Tips Model:	G1,G2,P1
Weight with Box:	Approx 170g (2 holes), Approx 180g(4 holes)

Scaling Handpiece:	1PC
Universal Spanner:	1PC
Tips:	3PCS(G1,G2,P1)

Main unit:	1pc
Boosting pipes:	3pcs (Metric system)
Power adapter:	1pc
English operation manual:	1pc

Main menu

Top Selling

Model	Air pressure	Standard Gas	Consumption Frequency
4 Hole	0.28Mpa(209kgf/cm²）	20-30L/min	0-17000Hz

Shank diameter:	CA 2.35MM
Fineness:	Medium/Fine
Recommend speed:	10,000-12,000 rpm/min，Max: 15000rpm/min
Package:	6pcs/Box

Rechargeable LED Light:	1 Set
Gross Weight:	32kg
Package Size (L)* (W)* (H):	986533cm
Height of Seat Surface Above Ground:	400~570 (mm)
Range of Back Rest Angle:	105~175 centigrade

Power：	100-240V 50/60Hz
With 3 Speed Settings:	500、1500、2500rpm/min
Torque Range:	＞1.5N.c

Main Unit：	1pc
Disposable materials：	2pcs
Adapter：	1pc
USB cable：	1pc
Base:	1pc

Power supply:	~100-240V 50Hz/60Hz 150VA
Coolant flow volume:	30~110ml/min
Handle wire:	It is recommended to use no more than 100 sterilization cycles
Pump pipe:	It is recommended to use no more than 8 sterilization cycles
Water temperature:	The water temperature of the normal saline in the recommended infusion bottle or infusion bag is 4°C
Size of Host Machine:	269mmX235mmX141mm
Weight of Host Machine:	3.5 kg

Environment Temperature:	+5 ℃-+40℃
Relative humidity:	20%-80%RH
Atmospheric pressure:	860hPa-1060hPa

Implant unit:	1pc
Bluetooth pedal:	1pc
Piezosurgery handle:	1pc
20:1 contra angle (with light):	1pc
Piezosurgery tips:	6pcs
Piezosurgery wrench:	1pc
Scaler tips:	2pcs
Ultra Ativator tips:	3pcs
Silicone base:	2pcs
Saline water tube:	2pcs
Power line:	1pc

High speed handpiece:	3 way spray, 3 air spray
Chuck type:	push button
Noise:	≤68dB
Air pressure at the back end of HP:	0.25-0.28MPA(4 hole)
Bur spplicable:	Ø1.59-Ø1.6mmx21-23mm
Rotation speed:	≥300,000rpm

Light Cure Adhesive Paste:	4g/Syringe
Light Cure Adhesive Primer:	3ml/Bottle
37% Phosphoric Acid Etchant:	2.5ml/Syringe
Little brush:	20 pcs
Syringe tip:	5 pcs