Warehouse For US

• Economical, efficient and time-saving.
  
• It is able to ensure the cleaning and refueling of dental handpieces.
  
• Three handpieces（two high speed and one low speed）can be maintained simultaneously.
  
• Various brands of high-speed and low-speed handpieces are applicable.
  
• The digital regulation time function can control the oiling time accurately.
  
• The air button with special design can remove the redundant oil after oiling and cleaning.
• Using sealed sliding door to minimize the diffusion of oil mist, Keep working conditions clean.
  
• Select the lubrication setting time from Short Mode,Long Mode and Extra Long Mode according to the handpiece.

• Economical, efficient and time-saving.
  
• It is able to ensure the cleaning and refueling of dental handpieces.
  
• Three handpieces (two high speed and one low speed) can be maintained simultaneously.
  
• Various brands of high-speed and low-speed handpieces are applicable.
  
• The digital regulation time function can control the oiling time accurately.
  
• The air button with special design can remove the redundant oil after oiling and cleaning.
• Using sealed sliding door to minimize the diffusion of oil mist, Keep working conditions clean.
  
• Select the lubrication setting time from Short Mode, Long Mode and Extra Long Mode according to the handpiece.

• Clean air — Oil-free, anti-rust, anti-microbial inner coating.
• Low noise — Silent cabinet reduces noise to 45dB(A).
• Long service life — Continuous operation with stable air flow.
  
• Soundproof enclosure — Effectively isolates noise for quieter clinic environment.
  

• Install an iron soundproof box, and the interior of the noise suppressor contains sound-absorbing cotton, temperature control sensors, and cooling fans.
  

• Host Unit
  
• Air Tank
  
• Pressure Gauge
  
• Compressed Air Output Valve
  
• Wastewater & Exhaust Discharge Valve
  
• Safety Valve
  
• Silent Equipment Enclosure
  
• Pressure Switch
  
• Solenoid Valve

• The air compressor automatically stops filling when the air pressure in the tank reaches 0.8 MPa, During product use, when the pressure drops to 0.5MPa, the machine will automatically restart and continue operating until the pressure returns to 0.8 MPa. This cycle repeats automatically.
• Emergency Stop Button
  Press the red button to immediately stop the machine in emergencies.
  Pull the button upward to reset after resolving the issue.
• Air Filter Maintenance
  Clean the filter regularly to prevent dust entry and maintain suction efficiency.
  Rinse the sound-damping sponge every 30-60 days.
• Tank Drainage
  Drain accumulated water every 3-5 days to maintain tank integrity.
• Inflation Time Test
  Recommended frequency: Monthly
  Procedure:
  1.Turn off power.
  2.Open drain and air outlet valves.
  3.Close both valves.
  4.Restart the machine and record the time to reach shutoff pressure.
• Note:
  Normal inflation time: 3–4 minutes.
  If exceeding 5 minutes, contact after-sales service.
• We offer remote installation guidance and maintenance services to ensure your product performs smoothly. Our professional team is ready to provide effective support tailored to your specific needs, helping you resolve any issues and address any concerns efficiently.  Contact Us

• Micro motor 204 / 102L / 18 (HANDPIECE)
  
• Ultra-compact & lightweight design (Model 18 optimized for ergonomic grip)
  
• 0~35,000rpm, low-vibration standard carbon brush motor
• Effective electrical design ensures no overheating even after long hours of continuous operation
  
• Foot pedal for stepless variable speed control
  
• Bi-directional rotation (clockwise / counterclockwise)
• Compatible with 2.35mm shank burs
• Integrated on/off switch
  
• Stable torque output: 3.4Ncm
  
• Rated power: 65w
  
• Maximum speed: 35,000 RPM
  
• Standard E-Type Connection for universal compatibility
  
• Robust construction for long-lasting durability
  
• Low noise & minimal vibration for precise operation

• Available in 3 versatile models (204 / 102L / 18) to meet diverse application needs; Model 18 stands out with its streamlined grip for fatigue-free prolonged use
• CE certificated micro motor handpiece set, compliant with international safety and quality standards.
• High-performance polishing motor ideal for handcrafting, dental lab work, and precision machining.
• Complete package includes: 1 High Speed Handpiece (204 / 102L / 18 optional), 1 Foot Pedal Switch, 1 Control Box Main Unit, 1 Wrench, 1 English Operation Manual, 1 Plug Adapter, and carbon brush replacement parts
• Multi-scenario application: Widely used in dental lab polishing, jade/crystal carving, professional nail care, student scientific experiments, electronic component assembly, jewellery engraving, abrasive finishing, and fine dental restoration work.

• Special separation bracket enables flexible placement, effectively preventing motor contact failure.
• Black elastic loop connecting the main unit and motor features sufficient length and resilience, avoiding wire tangling during operation.
• Standard five-core connector ensures stable power transmission with zero contact failure issues.
  
• Foot switch made of high-grade engineering plastic via precision injection molding, sturdy and corrosion-resistant.
  
• Right-side wire lead design keeps cables organized and free from interference during work.
  
• High-sensitivity micro switch with a service life of not less than 10⁷ operations
  
• Foot switch can withstand up to 100kg of pressure and offers excellent anti-slip grip.
  
• Screwless integrated design of the switch prevents damage caused by part loosening or falling off.
• Stepless variable speed system supports oil-free and maintenance-free long-term continuous operation.
  
• Precision thin-walled sealed bearings deliver ultra-low noise and extended service life.
  

•  Model 18 handpiece adds an ergonomic non-slip grip design, perfect for fine-grained operations requiring steady handling. 

• Multi-functional integration. Combines dental implant placement, low-power dental restoration, and ultrasonic bone cutting for minimally invasive dental surgery. Multiple programme modes freely configurable for implant placement, restoration, bone cutting, periodontal treatment, root canal therapy, and cleaning. Implant restoration function compatible with 10 types of bending heads (1:1, 1:2, 1:3, 1:4.2, 1:5, 3.2:1, 4:1, 16:1, 20:1, 27:1) for diverse surgical applications. Ultrasonic bone cutter features compatibility with over 20 different working tips, 4 operating modes, and 10 power levels. 16:1, 20:1, and 27:1 ratios, catering to diverse surgical applications. The ultrasonic bone cutter accommodates over 20 distinct working tips, four operational modes, and ten adjustable power levels to meet minimally invasive dental surgery requirements across various oral locations. Surgical parameters are automatically stored and recalled, eliminating repetitive settings. The software employs user-friendly, intelligent algorithms.
• Touchscreen display. Features a 7-inch true-colour TFT capacitive touchscreen with a visualised interface and ergonomic touch design, supporting multi-touch input with responsive feedback. The self-illuminating screen offers unrestricted viewing angles and adjustable brightness, ensuring optimal visibility under both bright and low-light conditions.
  
• Multi-function foot control. Artificial intelligence foot control algorithm ensures smooth motor speed and ultrasonic start/stop control. Enables seamless switching between surgical modes, water flow, and power settings for intuitive operation.
• Dental implant placement, restorative procedures, minimally invasive bone cutting, periodontal surgery, root canal therapy, and cleaning modes all support external connection to physiological saline or sterile water. Prevents backflow, reducing cross-infection risks.
  
• Host unit includes built-in operating instructions alongside ten common error prompts and alarm interfaces, providing immediate alerts for incorrect operation and enhanced overall system protection.
  
• Implant and micro-power handpieces, along with ultrasonic transducer handpieces, are autoclavable to reduce cross-infection risks, providing greater peace of mind during procedures.
  
• All implant, micro-power, and ultrasonic transducer handpieces incorporate high-brightness self-illuminating LEDs with multi-level brightness adjustment, enhancing surgical visualisation and precision.
• Implant and micro-motor handpieces employ next-generation high-efficiency, low-noise, high-torque brushless DC motors. Maximum speed: 40,000 rpm (1:1 ratio). Maximum torque: 80 N·cm (20:1 ratio). Ultrasonic bone cutters utilise high-performance crystal transducers. The main unit incorporates low-power intelligent control algorithms for precise motor speed and ultrasonic output regulation, resulting in reduced overall power consumption and operating temperature.
  

• Incorporates an integrated peristaltic pump with multi-level water flow settings for precise hydration control. Features a streamlined, integrated housing desige.

• Switch the working mode freely according to the selected work handpiece.
• The front panel adopts a touch LCD screen, with simple and clear function selection and working status indication. 
  
• The circular vibration trajectory of the working tip is completed together with cleaning and polishing, with a small amplitude of the working tip, achieving painless cleaning.
• Using titanium alloy working tips, it does not damage the dental bone and enamel. 
• In automatic water supply mode, specialized drugs such as hydrogen peroxide, sodium hypochlorite, and chlorhexidine can be used to improve clinical cleaning effectiveness. 
  
• Adopting a fully automatic frequency tracking system to automatically search for the best working state, the machine performance is more stable. 
  
• The sandblasting handpiece adopts a two-stage design, which is easy to install and disassemble, and convenient for cleaning and maintenance. 
  
• The powder tank adopts a side conical structure for stable sand production. 
  
• The scaler handpiece and sandblasting handpiece can be freely inserted and removed, and can be sterilized in environments with high temperatures of 134 ℃ and high pressures of 0.22MPa.
• The work process adopts microcomputer fully automatic control, which is easy to operate, simple and efficient.  
  

• Unique diversion technology and water outlet function of the scrubbing belt.
• The water outlet adopts a 10-level diversion method to precisely enhance your cutting efficiency and better control the depth and speed of bone tissue cutting.
• Precise scrubbing and synchronous water output, intelligent water flow control system, self-adjustable water volume, efficient cleaning.

• Cleaning and lubricating dental handpieces simultaneously.
• Maintaining two high-speed dental handpiece and one low-speed dental handpiece simultaneously.
• Maintenance and care for high-speed and low-speed dental handpieces of major brands.
• With oil injection time control function.
• No external working gas required.
• Adopt intelligent oil control technology to reduce oil mist.
• There are three filling time modes: short time,long time,and extra-long time.
• With chuck cleaning function.

Continuous working mode: Automatic Forward and Reverse Cycle after encountering resistance,it will automatically reverse.If there is no resistance after reversing,it will continue to work forward.

Left and Right Reciprocating Motion.

Continuous Forward Rotation: Automatically stop when encountering obstacles Left and Right Reciprocating Motion.

Reverse Continuous: torque limit mode.

Continuous Forward Rotation: Stop automatically after encountering resistance after encountering resistance,it will automatically reverse.If there is no resistance after reversing, it will stop working.

• The one-button operation, simple and convenient.
  
• High testing accuracy, widely used in different oral environment.
• Automatic calibrating ensures the measurements are accurate.
• The File clip, Lip hook and Touch probe can be sterilized by autoclaved sterilizer.
• Small size, big ability, more accurate multi-frequency measurement. The measurement is not affected by the types of teeth.

• 360°Adjustable handpiece.
• Visible colorful LED screen.
• Built in apex locator,can be used alone for root measurement.
• Reciprocating angle range 30° 60° 90° 150° 180° 210 °250° 370°.
• It provides more quality performance and stable operation for clinic.
• LED screen,three button,easy to operate.

• 17-inch HD Display – Wider clinical view with improved clarity for diagnostic observation.
• Multi-language Operating System – Adaptable for global clinics with fast language switching.
  
• Wi-Fi QR Transfer – QR-based wireless sharing to PC or mobile for easier documentation and communication.
• Quad-Image View Mode – Single/quad display for case comparison and treatment progress evaluation.
• Multi-function Handle Control – Capture, record, and mode switching integrated into the handle for smoother workflow.
  
• Aluminum Alloy Adjustable Stand – Stable, lightweight stand with adjustable height and angle for flexible clinical positioning.
  
• 56mm Universal Clamp – Fits most dental chair arms; fast installation with minimal space footprint.
• 100×100 mm & 75×75 mm VESA Mount – Compatible with most monitors; easy integration with standard mounting systems.

• Multiple AV Input Ports – Supports video and audio inputs for training, presentations, and educational demonstrations.

• 5th generation adhesive for all classes of direct restoration
• Post and core bonding 
• Ceramic veneer/crown/inlay and other indirect restoration bondings
• 5ml/Bottle

• High bonding strength and long lasting durability
  
• Easy infiltrate to dentin tubules.Reduce the risk of post-operative sensitivity
• Compatible with all light cure restoratives
• Time saving and easy to use 

• Enamel bonding : 30 seconds etch on enamel then apply 5th generation adhesive
  
• Dentin bonding: 15 seconds etch on dentin then apply 5th generation adhesive

• Etching gel is a polymer thickened gel for use on enamel and dentin.
• This gel will effectively treat enamel and dentin, producing the necessary microretentive surface for successful bonding. 
  
• The polymer thickener creates thixotropic properties, enhancing handling characteristics.
  
• The etchant rinse away cleanly and quickly, leaving no residue. 

• Indications: Treat dentin and enamel, Treating agent on dental restorative material. Isolate tooth and then prepare the cavity in a conservative manner. clean the entire surface with a slurry of pumice and water. Apply etchant using a tip, a disposable syringe tip, or disposable brush tip. Allow etchant to remain in palce for 15 seconds. etching time should be monitored with a stopwatch. begin timing at the end of application. 
  
• Option: Place etchant enamel first, then proceed to cover dentin, for a slightly longer enamel etching time. Rinse thoroughly (at least 5 seconds) to completely remover all traces of etchant. Remove exces moisture from the tooth and proceed with the application of etching gel, waiting for 10 seconds, then rise thoroughly. then apply adhesive.
  

• 100% Original Woodpecker ultrasonic scaler tips sets
  
• Compatible with SATELEC and NSK
• Applicable for: D1, D5 LED, D7/D7 LED, S6/S6 LED, D600/D600 LED, 41012068*5
• Package: 5 pcs

• Nano Top Surface: One piece nano integrated surface stain resistant anti penetration oil repellent scratch resistant
• Hidden Side Drawer: Hidden design serves as auxiliary work surface for small dental instruments
• Spacious Storage: 4 main drawers plus 1 side auxiliary drawer for ample instrument storage 
• Premium Damping Slides: Imported heavy duty triple hidden damping slides 50000 plus cycles smooth silent auto retraction
• Secure Combination Lock: Safe grade mechanical lock keyless security for sensitive supplies
• Durable Construction: High gloss acrylic PVC inner drawers aluminum rounded corners scratch resistant
• Silent Mobility: Silent silicone casters with bearings and brakes no floor scratches
• Convenient Power Supply: Back mounted socket 1.8m power cord for small dental devices
• Premium Handles: Stainless steel C shaped handles durable easy to clean rust resistant
• Included Accessories: 2 standard instrument trays for frequently used tools
  Easy Assembly: Pre assembled only casters need simple installation

• Dental Field: For dental clinics orthodontic practices labs to store instruments and supplies
• Medical Environment: For hospitals outpatient clinics to organize medical supplies 
• Beauty & Salon Settings: For beauty salons skincare centers to store beauty tools
• Professional Labs: For labs small healthcare setups to organize lab tools

• Optional Accessories: Sold separately contact us for customization
• Dimensions: Slight ±5mm error due to manual measurement
• Professional Use Only: Not a sterile medical device 
• Drawer Load: Do not overload to avoid damage to slides and cabinet
• Caster Lock: Lock during use to prevent accidental movement
• Cleaning: Use soft damp cloth to avoid scratching surfaces